Thermal Insulation Contracting LLC

dubai, United Arab Emirates

E-FOAM  Extruded Polystyrene Sheets are manufactured in United Arab Emirates,     E-FOAM  is used in wide area of applications related to Construction, Insulation, Interior Decoration, Water Proofing & so on... Properties of the Thermokole are : Excellent Thermal Performance High Compression Strength, Low Weight, Outstanding impact Absorption, and High Resistance to Water Penetration  Properties of the Thermokole are : Excellent Thermal Performance High Compression Strength, Low Weight, Outstanding impact Absorption, and High Resistance to Water Penetration     E-FOAM Roof Fix  :  Description  : Extruded Polystyrene rigid foam with skin. It is available with and without shiplap edge treatment, otherthicknesses available upon request. Major Application  : Thermal Insultaion board for roof, Density of roof fix is 32-35kgs/m3 For upside down roof belowthe gravel protexting Roof Concrete. Board Dimention   : Roof-fix with shiplap edges, thickness:30, 40, 75 & 100 mm, Width 300mm (coveringdimension)Lenght: 1250mm (covering dimension)Other lenght and thickness will be availableupon request.   E-FOAM Wall Fix  :   Description  : Extruded Polystyrene rigid foam with skin. It is available with and without shiplap edge treatment, other thicknesses available upon request. Major Application  : Thermal Insultaion boards for Walls, Tile backing Core materials for sandwich panels low temperature space Density of wall fix is 32-35kgs/m3 uses in between internal standard walls/external brick wall. Board Dimention  :Wall-fix with shiplap/yongue & Groove edges/butt edges Thickness: 30, 41, 50, 75 & 100mm. Width: 600mm, Length 2500mm/1250mm Other length and thickness available upon request.   E-FOAM Floor Fix :   Description  : Extruded Polystyrene rigid foam with skin, high density and compresive strenght. It is available with and without shiplap edge treatment. Major Application  : Floors, Cold Stores Parking decks, Density of floorfix is 40-45kgs/m3below the floor concrete slabs/damp proof mambrane. Board Dimention  :Floors, Cold Stores Parking decks, Density of floorfix is 40-45kgs/m3below the floor concrete slabs/damp proof mambrane.

Expanded Polystyrene insulation is a lightweight, rigid, closed cell insulation. EPS is available in several compressive strengths to withstand load and back-fill forces. This closed-cell structure provides minimal water absorption and low vapor permanence. Density(kg/m3): 10mm(Min) 35mm(Max) Thickness:10mm(Min) 1250mm(Max) Width:Upto 1.2 Length:Upto 4.0 Facing Unfaced Aluminium Foil Polystyrene pipe Section/Shape Moudling Density(kg/m3): 10mm(Min) 35mm(Max) Thickness:10mm(Min) 100mm(Max) Diameter:1/4Inch(Min) 14Inch(Max) Facing Unfaced Aluminium Foil Polystyrene Decorative Products Density(kg/m3): 10mm(Min) 35mm(Max) Thickness:10mm(Min) 100mm(Max)   (1) Events Exhibitions Stands   (2) Educational Art Craft   (3) Interior Decor Shapes   (4) Shopping mall Display Decor Measurement : L*W*H Expanded Polystyrene Beads & Chips Density(kg/m3): 10mm(Min) 35mm(Max) Thickness:10mm(Min) 100mm(Max)   (1) Events Exhibitions Stands   (2) Educational Art Craft   (3) Interior Decor Shapes   (4) Shopping mall Display Decor Polystyrene Sheets/Slab :  Density(kg/m3): 10mm(Min) 35mm(Max)  Thickness : 10mm(Min) 1250mm(Max)  Width:Upto 1.2 Length:Upto 4.0  Facing :Unfaced Aluminium Foil Polystyrene pipe Section/Shape Moudling : Thickness:25mm(Min) 100mm(Max)  Density(kg/m3): 10mm(Min) 35mm(Max)  Diameter: 1/4Inch(Min) 14Inch(Max)  Facing:Unfaced Aluminium Foil  Polystyrene Decorative Products :  Density(kg/m3): 10mm(Min) 35mm(Max) Measurement : L*W*H Based on Products Application Events Exhibitions Stands Educational Art Craft Interior Decor Shapes Shopping mall Display Decor Expanded Polystyrene Beads & Chips :   Density(kg/m3):  10mm(Min) 35mm(Max)  Application : Packing Decoration Education Art & Craft Furnishing Industries Bean Bag

Rigid Polyurethane/Rigid Polyisocynurate with it's Low Thermal conductivity Properties: Offers Optimum Insulation with Low maintenance. Enhances the value of property and quality of life. Leads to large energy saving and reduce heating cost. Is cost effective and easy to install. Offer excellent mechanical strength.  Thermo PUF Sheets  Density(kg/m3) Thickness Width Length Facing MM. Max. Min. Max. In) In) 35 100 20mm 500mm Up to Up to AkittmedFoil 1.2 2.0 ', raft paper, 8.F•G  Thermo PIR Sheets  Density kg/m3) Thickness Width Length Facing Min. Max. Min. Max. 0n) In) 32 100 20mm 500mm U!', ..° Up ' muum?ntrndFoit 1.L 2.0 Kraft paper. 8.3.0  * Note: Pipe Sections & Segments shall be supplied up on Client's request as per required sizes & thickness  Closed Cell Rigid foam Material available in the form of  Boards, Sheets, Pipe sections, Curved segments  applied in Building Wall, Roof and Flooring, Pipe Insulations and wherever Thermal Insulation protection is required, in combination with various facings like Alumnium-foil, Kraft paper, B.F.G, etc..,   Rigid Polyurethane/Rigid Polyisocynurate with it's Low Thermal conductivity Properties: Offers Optimum Insulation with Low maintenance. Enhances the value of property and quality of life. o Leads to large energy saving and reduce heating cost. Is cost effective and easy to install. Offer excellent Mechanical strength.  Plain Sheets Plain Sheets with Aluminium Foil Plain Sheets with Black Tissue Thermo PIR Sheets  Density(kg/m3): 35mm(Min) 100mm(Max) Thickness:20mm(Min) 500mm(Max) Width:Upto 1.2 Length:Upto 2.0 Facing Unfaced Aluminium Foil Kraft Ppaer, B.F.G  * Note: Pipe Sections & Segments shall be supplied up on Client's request as per required sizes & thickness 

Foamglass / Cellular glass insulation is a lightweight, rigid material composed of millions of completely sealed glass cells. Foamglass / Cellular glass insulation is manufactured in a block form and then fabricated into a wide range of shapes and sizes to satisfy industrial and commercial insulation requirements. Foamglass / Cellular glass insulation has a homogeneous, closed cell glass structure that resists moisture in both liquid and vapor forms and results in long term, constant insulating efficiency. Foamglass / Cellular glass insulation is 100% glass and contains no binders or fillers – it cannot burn. It will not absorb flammable liquids or vapors. If a facility fire occurs, Foamglass / Cellular glass insulation can help protect people and equipment by aiding in the containment or suppression of the flames. Foamglass / Cellular glass insulation is unaffected by common chemicals and by most corrosive atmospheres. It does not promote metal corrosion and its moisture resistance will help keep water from reaching equipment and piping. Foamglass / Cellular glass insulation is not affected by temperature differentials and humidity. It will not swell, warp, shrink or otherwise distort. The integrity of the insulation remains intact even at the extremes of cryogenic service. Foamglass / Cellular glass insulation is resistant to vermin, as well as microbes and mold. Foamglass / Cellular glass S insulation can withstand loads which crush most other insulating materials. In a properly designed piping system, it eliminates the need for special treatment at pipe cradles. It provides a fire base for roof membranes, jacketing or vapor retarders, and can prolong their life. Foamglass / Cellular glass insulation is free of CFC’s and HCFC’s and has been formally recognized as an ecologically friendly, sustainable construction material. Foamglass / Cellular glass insulation systems provide solutions for a wide range of piping and equipment applications at operating temperatures from -268 to 482 ô€¡ˆC (-450 to 900 F). Cryogenic systems Low temperature pipe, equipment, tanks and vessels Medium and high temperature pipes and equipment Hot oil and hot asphalt storage tanks Heat transfer fluid systems Hydrocarbon processing systems Chemical processing systems Above ground and underground steam and chilled water piping Commercial piping and ductwork Foamglass / Cellular glass conforms to ASTM C 552, ASTM C 1639, EN 14305 standards to suit your requirements Foamglass / Cellular glass insulation has a homogeneous, closed cell glass structure that resists moisture in both liquid and vapor forms and results in long term, constant insulating efficiency. Foamglass / Cellular glass insulation is 100% glass and contains no binders or fillers – it cannot burn. It will not absorb flammable liquids or vapors. If a facility fire occurs, Foamglass / Cellular glass insulation can help protect people and equipment by aiding in the containment or suppression of the flames. Foamglass / Cellular glass insulation is unaffected by common chemicals and by most corrosive atmospheres. It does not promote metal corrosion and its moisture resistance will help keep water from reaching equipment and piping.It is not affected by temperature differentials and humidity. It will not swell, warp, shrink or otherwise distort. The integrity of the insulation remains intact even at the extremes of cryogenic service. Foamglass / Cellular glass insulation is resistant to vermin, as well as microbes and mold , can withstand loads which crush most other insulating materials. In a properly designed piping system, it eliminates the need for special treatment at pipe cradles. It provides a fire base for roof membranes, jacketing or vapor retarders, and can prolong their life. Foamglass / Cellular glass insulation is free of CFC’s and HCFC’s and has been formally recognized as an ecologically friendly, sustainable construction material.this systems provide solutions for a wide range of piping and equipment applications at operating temperatures from -268 to 482 ô€¡ˆC (-450 to 900 F). Cryogenic systems Low temperature pipe, equipment, tanks and vessels Medium and high temperature pipes and equipment Hot oil and hot asphalt storage tanks Heat transfer fluid systems Hydrocarbon processing systems Chemical processing systems Above ground and underground steam and chilled water piping Commercial piping and ductwork  Foamglass / Cellular glass conforms to ASTM C 552, ASTM C 1639, EN 14305 standards to suit your requirements

Aerolam Premium/Premium PE  Roll Size (W X L) :1.2m X 40m Bubble Size : 4mm x 10 mm Total Thk (mm) 8 mm Reflection Ratio : 97% Thermal Resistance Emissivity 0.03-0.04 Temp. Range : -122 F to 230 F (50°C to 110 °C) Application: Roof/Wall/Cabinet/Packaging  Aerolam METPET/METPET PE  Roll Size (W X L) :1.2m X 40m Bubble Size : 4mm x 10 mm Total Thk (mm) 8 mm Reflection Ratio : 97% Thermal Resistance Emissivity 0.03-0.04 Temp. Range : -122 F to 230 F (50°C to 110 °C) Aerolam Super/Super PE  Roll Size (W X L) : 1.2m X 40m Bubble Size : 4mm x 10 mm Total Thk (mm) 4.5 to 5 mm Reflection Ratio : 95% Thermal Resistance Emissivity 0.03-0.04 Temp. Range : -122 F to 230 F (50°C to 110 °C) Application: Roof/Wall/Cabinet/Packaging  AEROLAM ALUMET  Roll Size (W X L) :1.2m X 40m Bubble Size : 4mm x 10 mm Total Thk (mm) 8 mm Reflection Ratio : 97% Thermal Resistance Emissivity 0.03-0.04 Temp. Range : -122 F to 230 F (50°C to 110 °C) Roll Size (W X L) :1.2m X 40m Bubble Size : 4mm x 10 mm Total Thk (mm) 8 mm Reflection Ratio : 97% Thermal Resistance Emissivity 0.03-0.04 Temp. Range : -122 F to 230 F (50°C to 110 °C) Application: Roof/Wall/Cabinet/Packaging   Aerolam METPET/METPET PE  Roll Size (W X L) :1.2m X 40m Bubble Size : 4mm x 10 mm Total Thk (mm) 8 mm Reflection Ratio : 97% Thermal Resistance Emissivity 0.03-0.04 Temp. Range : -122 F to 230 F (50°C to 110 °C)  Aerolam Super/Super PE  Roll Size (W X L) : 1.2m X 40m Bubble Size : 4mm x 10 mm Total Thk (mm) 4.5 to 5 mm Reflection Ratio : 95% Thermal Resistance Emissivity 0.03-0.04 Temp. Range : -122 F to 230 F (50°C to 110 °C) Application: Roof/Wall/Cabinet/Packaging   AEROLAM ALUMET : Roll Size (W X L) :1.2m X 40m Bubble Size : 4mm x 10 mm Total Thk (mm) 8 mm Reflection Ratio : 97% Thermal Resistance Emissivity 0.03-0.04 Temp. Range : -122 F to 230 F (50°C to 110 °C)

Quick Insulation Fixing System:   GI/SS perforated Pin & Speed washers Size : all STD Sizes & Dimentions GI/SS Stick Pin & Speed Washers Size : all STD sizes And Dimentions PVC Insulation Fixing for Wall And Roof PVC Expanding Fixing System for Wall & Roof PVC Insulation Slab And Mattress Thermal Quick Insulation Fixing System Suitable for Below Configurations: Rockwool Fiberglass Thermokole Polystyrene Extruded Polystyrene ThermoPUF GI/SS perforated Pin & Speed washers   Size :  all STD Sizes & Dimentions GI/SS Stick Pin & Speed Washers  Size :  all STD sizes And Dimentions PVC Insulation Fixing for Wall And Roof PVC Expanding Fixing System for Wall & Roof PVC Insulation Slab And Mattress  Quick Insulation Fixing System Suitable for Below Configurations: Rockwool Fiberglass Thermokole Polystyrene Extruded Polystyrene ThermoPUF