Post Buy Requirement
UN
sharjah, United Arab Emirates
Add Review

Our Products

Laminar Flow Systems

The ceilings are available in square, rectangular, octagonal or circular shapes In order to suit any room layout and answer specific requirements to create a clean zone around the patient, medical staff and medical devices. Our laminar flow ceilings are mainly used with our Clinic Air


Handling Unit but can be also adapted to any type of products from a different brand


This system is dedicated to operating theatres in order to meet ISO 5 standard (complying with EN ISO 14644-1 ) as well as to pharmaceutical industry. It helps fight cross contamination and hospital borne infections.


We have developed two ranges, in order to meet with all country regulations
NFS 90-351 Range


rectangular, square, octogonal ceilings (on demand)
DIN 1946
rectangular, circular, octogonal ceilings

View Complete Details

Peripheral Ceiling Lights

BRR Light Fittings have been design-ed and developed to be used in any controlled environment, where access to the fitting from above the controlled area is preferred. They have been installed in many different industries, such as pharmaceutical, biotechnological, electronic, food, screen printing and many more.


The BRR is a recessed, airtight light fitting and is accessible from the technical void above the controlled area, thus reducing the potential risk of contamination within the controlled area.



The light weight access tray is easily lifted away once the retaining screws have been removed, giving full access to the tubes and electrical connections.


The housing is manufactured from zinc coated steel which is then powder coated after production. Special brackets are fitted on the top of the housing thus allowing the fixture to be clamped and tightened in the ceiling.


An anodized aluminum reflector is installed above the T5 lamps to achieve the required light distribution. In order to limit the number of tools during maintenance, all electrical connections between the different electrical components are made by means of a 3 way push/fit connector



have been designed and developed to be used in any controlled environment, where access to the fitting from above the controlled area is preferred. They have been installed in many different industries, such as pharmaceutical, biotechnological, electronic, food, screen printing and many more.


The BRR is a recessed, airtight light fitting and is accessible from the technical void above the controlled area, thus reducing the potential risk of contamination within the controlled area. The light weight access tray is easily lifted away once the retaining screws have been removed, giving full access to the tubes and electrical connections.


The housing is manufactured from zinc coated steel which is then powder coated after production. Special brackets are fitted on the top of the ho using thus allowing the fixture to be clam ped and tightened in the ceiling.


An anodized aluminum reflector is installed above the T5 lam ps to achieve the required light distribution. In order to limit the number of tools during maintenance, all electrical connections between the different electrical components are made by means of a 3 way push/fit connector.


TYPES AVAILABLE:


    • 2 x 54W

    • 4 x 14W



TYPES AVAILABLE:

  • Emergency / battery back up

  • Dimmable ballast

  • 304 stainless steel frame

  • Deflectors

  • Walkover tray

  • Second ballast for 2 x 54W)

View Complete Details

Surgical Scrub Sink

The Falcon range of surgeons scnib-up sinks with integrated Infra-red disinfectant soap and water dispensing, units are manufactured in 304 grade stainless steel, with contoured corners to the trough and polished finish for ease of maintenance and greater hygiene, with an anti-splash front and integral 360mm high splash back. Complete with 1 x Infra red disinfectant soap and water dispensing module, 1 x TMY3 thermostatic valve, 1 x batteiy backup power supply, 1 x low soap detector probe, 1 x lockable front opening door per station. Left or Right handed waste outlet with 1 x c/p 38mm flush grated waste fitting, 1 x stainless steel under shield with fully enclosed sides and bottom to wall with contoured bottom edge, 1 x full length stainless steel wall mounting joggle bracket. The units are completely assembled and fully tested, leaving only wall fixing and connection to services by others on site.



  • Designed, to be used lor hand and nail cleaning be lore entering sterile zone

  • Made of stainless steel

  • Photocell and knee controlled water (low - Knee controlled soap flow

  • Thermostatic mixing valve lor cold &i hot. water

View Complete Details

Sliding Doors

Besides the fact that a slider is a lot morefunctional in use than a hinged door, think ofdimensions, door blade weight, and sealing, the construction is extremely helpful in case oflimited working areas, narrow corridors, and necessary activities next to the door opening.


In the last two decades Markus has mainly specialised in door concepts for the care sector. Proof of which can be found in the number of differentiated door concepts that fully comply with all kind of European norms on the one hand and satisfy the needs of modern hospitals on the other. Constant development to pace the increasing patients' demand and hospital needs.


Thinking of wound infection, the danger of viruses, the conditions to work hygienically, or how to beenergy economic and to be able to disinfect safely, the only door concept incorporating all thesedemands and conditions must be a henneticallysealing sliding door.


The Markus M5 satisfies all criteria: from maintaining air-hierarchy in a simple but effective way, being silent and inconspicuous in use, to realisinga significant drop in noise level, all due to thehermetic character of the door concept. Easy toclean, simple to automate and designed to beused aesthetically.

View Complete Details

Hermetically Sealed Sliding Doors

KONE hermetically sealed doors are specially designedfor use in operating theatres, laboratories and otherclean room environments where air pressure controland hygiene is of the utmost importance. The doors areequipped with special sealing rubbers, rounded profilesand door panels covered with HPL on both sides ofthe door Also available as an automatic or manual door, the appearance of the door can be specified to suit itsenvironment. The KONE hermetically sealed inside slidingdoor also provides a space saving and safety feature, the moving panel of the door can slide into a sealedcompartment to ensure safety and maximise space.


The M5 is a sliding door and consequently air-hierarchy, air pressure differences, will have noimpact on the door movements. Opening andclosing time is extremely short in order to reduceair pressure losses to the bare minimum, anddrastically shorten the recovery period.

View Complete Details

Pneumatic Systems


  • With complete program of easily operated and reliable pneumatic tube system, offer quick and safe transportation of documents, analysis samples, bank noted etc. Carrier or bags are used during transportation. Facilities can be connected to security cabinets or safes and are equipped with log printer and PC supervision. The system can easily be installed in old or new premises for increased security

  • Current transport requirements are identified. With an over all view and great experience we can offer reliable and cost effective solutions

  • Our expert design offers a pneumatically controlled device system, requiring less electricity, a longer life expectancy and more reliability when compared to electric motors. With our air tube system, compressed air moves components through the tube from entry point to a landing destination, offering a fast, safe and low voltage option when it matters most. Air Link understands the sensitivity required to move glass bottles, IV bags, lab samples, blood and other medical goods, so our air tube systems are designed with controlled take offs and soft landings so as to ensure safe transport

View Complete Details

Ceiling Pendant Light

Celling pendants help to optimize the space inside anoperation room end to keep wires end artier elements toInterfere with the operation table. Columns make easiermedical tasks and procedures adding safety while placing monitoring equipment. The wide range of arms thatTedisel Medical offers covers the needs of any operation theatre

View Complete Details

AGSS Simplex Plant

All systems are manufactured to HTM 02-01 specifications, are factory tested prior to dispatch and come with a comprehensive warranty.


Standard configurations are available but we are happy to supply custom configurations if required.



  • Fully compliant with HTM 02-01

  • Tested prior to dispatch

  • Single and 3 Phase option

  • Anti-vibration mounts fitted to pump units

  • Flexible connections and copper pipeline connections supplies on inlet and exhaust of all units

  • Comprehensive Warranty

View Complete Details

Nitrogen Generators

Oxygen generators are suitable for any medical applications and ensure you to get the best and most reliable "on site" solution for oxygen


We offer a wide range of oxygen generators especially designed for hospital piping systems. Our products support the hospital needs continuously in its daily work, with simple operation, little management, stable running, opening up a new dimension in safety, efficiency, quality, cost saving and from compact models to large units producing up to 99% oxygen purity

View Complete Details

Bulk Liquid Oxygen Tanks

The vacuum-insulated double wall tanks consist of two concentric vessels, an austenitic steel inner tank and an outer jacket in carbon steel with an anti-corrosion primer and a special environmentally friendly top coat. The interspace between inner and outer tank is evacuated and filled with insulating powder (perlite). An adsorbent is also added to maintain the vacuum in the insulation interspace.


The standard tanks come in gross nominal water capacities from 3, 160 litre to 61, 620 litre. The maximum allowable working pressure for these tanks is 18, 22 or 36 bar gauge for design temperatures ranking from -196C up to 20C. All standard tanks have vertical configuration, requiring little space for installation. The pressure vessels are manufactured and tested in accordance with the Pressure Equipment Directive EU 97/23/EC and EN 13458. These codes are internationally accepted. Consequently, it will be much easier than before to install and use these tanks in and outside of the European Union.


The quality management system satisfies all elements of the ISO 9001 program. All produced tanks are subjected to inspection and quality control under supervision of independent inspection bodies.


The operating pressure may be set up to 90 % of the maximum allowable working pressure and is automatically maintained constant by the regulator and pressure building coil fitted to the tank. Each tank can also be equipped with a tank mounted (clip-on) air-heated vaporizer to supply product in gaseous form at ambient temperatures and flow rates up to 120 Nm3/h. Standard tank features are various fittings for transportation and installation. Vaporizers up to 1, 000 Nm3/h are installed separately.


Based on the standard design, we offers additional features depending on clients requirements.


Standard carbon dioxide tanks are very similar to the tanks for air gases. As a function of the application and customers request you have here the choice between an inner vessel either manufactured from a low temperature resistant austenitic steel or a fine grain carbon steel. The insulation system is equal to the system which is used for the air gas tanks.


CO2-tanks, equipped with an inner vessel made out of a low temperature resistant austenitic steel can therefore also be used as multi-purpose storage for other industrial gases. Owns long standing experience in hand-ling other liquefied gases such as for example LNG and hydrogen. Tanks for these gases are engineered and manufactured according to customers specifications.


The vaporizers are suitable for a design overpressure = max. allowable working pressure (PS) of 40 bar and a allowable operating temperature range (TS) of +50/-269C.


Design and testing was carried out in accordance with the directive 97/23/EC concerning pressure equipment, AD 2000-Merkbltter and DIN EN. The connecting flanges are DIN EN compliant.


The Linde finned tubes and connecting flanges are made of aluminium alloy and the seals for-med according to Linde standards. Variations defined by specific order instructions are possible.


The stressing of the materials used, at low temperatures for example, was taken into account during their selection.

View Complete Details

Medical/Surgical Air Plant

Air Plant Systems incorporating Variable Speed Drive [VSD] Compressors.


The VSD compressors can provide upto a 35% energy saving when compared with other non VSD systems of similar capability.



  • Fully compliant to HTM 02-01 specification

  • VSD control matches pump speed to air usage automatically adjusting the pump speed in line with current demand

  • VSD technology can be added to any new MMPL Screw Compressor System

View Complete Details

Medical Vacuum Plant

All Vacuum systems are manufactured to HTM 02-01 or HTM 2022 specifications as appropriate, are factory tested prior to dispatch and come with a comprehensive warranty.


Product shown is a Triplex Medical Vacuum Plant to HTM 02-01.



  • Fully HTM 02-01 or HTM 2022 compliant

  • Simplex, Duplex, Triplex and Quadruplex solutions

  • "Fail Safe" control system in the event of power loss

  • Alarm and BMS outputs for remote status indication are provided

  • Anti-vibration mounts are fitted to all pump units to minimise noise and wear

  • Pressure sensors and switches are pre-set at the factory for ease of installation

View Complete Details

ASPIRATORS WITH INDUCTION MOTOR


  • Motor protected by a thermal device. Output power 0.4 kW - 3.1 A

  • Maximum flow 1250 l/min.

  • Maximum operating head for continuous service 1300 mm H2O.

  • Three electronic probes for maximum level control of secretion.

View Complete Details

Dental Vacuum System

The aspirator automatically responds to every functional problem or danger for the integrity of the machine: during suction a display gives information on the working conditions of the machine.


Semi wet Dental Vacuum Plant


Turbo smart Dental Vacuum Plant


Turb Jet Dental Vacuum Plant


Dental Air and Vacuum Package System

View Complete Details

Dental Air Compressors

All compressors are free from oil lubrication, in addition four inline filters are standard on all compressors ensuring dry compressed air of high quality and purity


Simplex and Duplex Dental Air Plants


Triplex Dental Air Plant


Quadruplex Dental Package Air Plant


Multi Compressors Dental Air Plant

View Complete Details

Master Alarm Panel

Master alarm panel provides continuous monitoring of medical gas installations across hospitals and other healthcare providers. It monitors up to 4 conditions for each gas and up to 6 gases per panel, giving clients comprehensive information about the state of their supply at any given time.


The system is easy to install and also to operate, with only 1 pair of cables used as interconnecting wiring. The alarm system meets the current HTM02-01 and HTM2022 specifications.


Each unit also benefits from useful features such as a volume control, mute button and engineers reset button. They can easily be tested to ensure they are still working and a light will be illuminated when the mute button is pressed. Access to the panels is gained via a hinged door and a tamperproof screw so clients can be certain their system is safe and secure at all times, other than when they specifically choose to access it. Different panels are available for either flush or surface mounting applications, to take into consideration the different requirements of different healthcare providers.

View Complete Details

Area Alarm Panel

Area alarm is used to monitor pipeline pressure within a ward, theatre etc. The pressure is monitored by pressure switches in the pipeline downstream from the last AVSU. Pressure is monitored for both high and low pressure (low only for vacuum). The integrity of the cabling between the pressure switches and the alarm panel is monitored, and a fault on this cable will result in a system fault alarm, with all affected alarm conditions going into alarm condition.


Features

  • Simple connection: Just 3 cores connect the alarm to the end of line components, regardless of the number of gases.

  • Simple Maintenance: All connections (including mains) are plug & socket. The alarm components can be changed in about 1.5 minutes.

  • Versatile: Several alarms can be connected to the same end of line components using just 3 cores can transmit either a common alarm or all alarm conditions

  • Complies with: HTM, BS EN 7396 and BS EN 4754

View Complete Details

AGSS Duplex Plant

All systems are manufactured to HTM 02-01 specifications, are factory tested prior to dispatch and come with a comprehensive warranty.


Standard configurations are available but we are happy to supply custom configurations if required.



  • Fully compliant with HTM 02-01

  • Tested prior to dispatch

  • Single and 3 Phase options

  • Stacked systems available

  • Anti-vibration mounts fitted to pump units

  • Alarm and BMS output connections on all models

  • Flexible connections and copper pipeline connections supplies on inlet and exhaust of all units

  • Comprehensive Warranty

View Complete Details

Ceiling NIST Copper Tube

O2 Ceiling NIST Copper Tube - 15mm Dia - 150mm Length



  • Gas Specific Female NIST

  • Gas Specific engraving on Female NIST

  • Supplied with a length of Copper pipe

  • Machined to BS EN ISO 5359:2008

  • MRI Compatible

View Complete Details

Automatic Manifolds


  • Fully HTM 2022 / HTM 02-01 compliant

  • Fully Automatic Operation

  • Fail Safe control system in case of power loss

  • Integral Alarm System Interface Indicator

  • Integral Transmitter

  • BMS/Alarm outputs for Remote Status Indication

  • Line Fault Monitiring for ERM and ESM backup manifolds wiring

  • Available in 400kpa, 700kpa and 1000 kpa output capacities

View Complete Details

Degreased Medical Gas Copper Fittings

Copper fittings are manufactured under BS EN 13485 Medical Devices: Quality Management Systems. They are suitable for jointing degreased Medical gas copper tube pipelines compliant to BS EN 13348, BS EN 1057 and BS 2871 part 1 Table X as quoted in HTM 02-01 and C11.



  • Each fitting is individually bagged in clear protective polythene bags and sealed to maintain cleanliness.

  • All fittings carry a label identifying the degreased specification and production batch number.

  • Cleanliness is guaranteed below 0.01 mg/cm2 of hydrocarbons on the degreased surface of the fitting.

  • All boxes include logical and concise labeling identification.

View Complete Details

Brass Munsen Ring

Munsen rings manufactured from brass with a single M10 tapping complete with brass screws.M10 to M6 reducing bush available on request. Suitable for suspending copper tube complying with BS EN 13348 & BS EN 1057 (formerly BS 2871) with metric threaded studding or screws

View Complete Details

Medical Gas Pipeline Identification Tape

Compliant to HTM 02-01 NHS Health Technical Memorandum, C11 and BS 1710:1984. Colour banding should be applied near to valves, junctions, walls etc. A label every 3m should indentify each gas and arrow tape showing the flow direction of gas.UK Pipeline ID Tape is suitable for indentifying medical gas pipelines

View Complete Details

MEDICAL GAS TERMINAL UNITS

The East SP terminal unit has an all metal construction, offering superior strength, wear resistance and longevity. A full complement of gas specific indexes is available including oxygen, nitrous oxide, O2/N2O, medical air, surgical air, vacuum, AGSS/WAGD, nitrogen and carbon dioxide.

View Complete Details

Lockable Line Valves

All Line Valves are manufactured to HTM 02-01 specifications, are factory tested for pressure prior to dispatch and come with a comprehensive warranty.



  • Fully HTM 02-01 compliant

  • Fitted with BS 739 NIST connectors

  • Tamper proof locking mechanism that is lockable in both open and closed positions

  • Can be supplied for use with pipework of 15mm to 159mm

  • All valves fitted with flat faced 'o' ring unions

  • Every unit is tested for pressure and tightness before dispatch

View Complete Details

Degreased Medical Copper Tube

Degreased copper tube is manufactured under BS EN 13485 Medical Devices: Quality Management Systems. It is suitable for jointing degreased medical gas copper fittings and other medical gas equipment compliant to BS EN 13345, BS EN 1057, BS 2871 Part 1 Table X, EN 7396 and HTM 02-01.


copper tube is designed for use in Medical Gas Pipeline System (MGPS) Installations and incorporates the specialist requirement of the MGPS industry to include cleanliness, packaging and usability required to attain the levels of quality as stated particularly in HTM 02-01.


Specific Benefits

  • Each pipe is cleaned to have a maximum carbon level 0.20mg/dm2

  • Each pipe is individually end capped and bundled in sealed polythene bags to maintain cleanliness

  • Chemical composition CU.DHP to ISO 1190-1/CW024A to EN1412

  • All Copper Tube is manufactured under strict Quality Control procedures to ISO 9001:2008 and CE marked under the Medical Device Directive 93/42/EEC (CE 0086)

  • Batch numbering for traceability is included on all pipe work

  • Labeling on the copper tube will contain the following details: Date Code of Manufacture, EN 13348, Tube Size, Manufacturer, Temper, British Standard Institute BSI Kitemarked (CE 0086)

View Complete Details

Non-Return Valves

All Non Return Valves are manufactured to HTM 02-01 specifications, are factory tested for pressure prior to dispatch and come with a comprehensive warranty.



  • Fully HTM 02-01 compliant

  • Can be supplied for use with pipework of 15mm to 76mm

  • Fitted with flat faced 'o' ring unions

  • Every unit is tested for pressure and tightness before dispatch

View Complete Details

Antistatic Hose


  • Anti-static Hose Roll PVC

  • Conform to BS EN ISO 5359:2008

  • Exceptional Performance and renowned reliability

  • Reinforced anti-static, low toxic liner

  • Cadmium and silicone free

  • Resistant to a wide range of chemicals

  • Carefully selected materials

  • Conforming to BS ISO 2878:2005

  • Electrical Conductivity.

  • Anti-static Pure Hose Roll Polyurethane

  • Conform to BS EN ISO 5359:2008

  • Does not contain plasticizers in any form

  • Will not take harden

  • Phthalate free

  • Odour free

View Complete Details

Reserve Manifolds


  • Fully HTM 02-01 compliant

  • Uses 2 stage regulator for good flow characteristics

  • Supplied with pre-set regulators and pressure sensors

  • Uses highly visible readouts for cylinder contents and pipeline pressure

  • Provides safety relief and isolation valves

  • Can be supplied in wall or floor mounted variants

  • Electrical connections pre-wired to a termination box

View Complete Details

Compact Panel

Compact Panel is a central gas supply unit for the pressure control of analytical gases in laboratory facilities. Depending on the requirements, these units switch over to a spare cylinder in order to enable a continuous gas supply. The use of contact gauges allows the monitoring of empty gas cylinders. This product is suitable for central gas supply for the distribution of gases in laboratory applications. Ideal for Supply of gases for laser cutting applications and Various other processes requiring continuous gas supply.

View Complete Details

Doppelregulus Cylinder Pressure Regulators

Labo-F and Doppelregulus cylinder pressure regulators are for applications with medium flow requirements (Labo-F) or low outlet pressures (Doppelregulus). Universal use - for all technical gases (gas purity up to 5.0). Ideal for precise control of low outlet pressures and control of low outlet pressures.

View Complete Details

Ultra High Purity Compact Panel

Ultra High Purity Compact Panel is a VCR compatible central gas supply unit for pressure control of high grade analytical gases in laboratory facilities. Depending on the requirements, these units switch over to a spare cylinder in order to enable an uninterrupted gas supply. The use of contact gauges allows the monitoring of empty gas cylinders, in combination with an annunciator

View Complete Details

Wega Corrosive Gases Cylinder Pressure Regulators

WEGA Corrosive Gases and Purging cylinder pressure regulators are designed with a captured bonnet for use with corrosive gases and gas mixtures (based on the highly reliable 44-2200 and 44-2800 Series regulator technology). Dual-stage version is available. Ideal for use in reduction of high pressure gases in storage cylinders to a low operating pressure.

View Complete Details

Room Pressure Monitor

The Model 8630-SM PresSura Room Pressure Monitor is designed to measure the pressure differential in hospital rooms.


The 8630-SM measures the actual room pressure differential using TSIs unique, bi-directional pressure sensor. If the pressure differential is too great, too small, or the wrong direction, the Model 8630-SM will activate audible and visual alarms.
The Model 8630-SM features adjustable alarm delays to avoid nuisance alarms. When the room is unoccupied, the Model 8630-SM can be changed to no isolation mode, de-activating all alarms. Hie Model 8630-SM easily integrates to the building management system using a low alarm relay and an analog output of the measured pressure differential.


Benefits

  • Meets CDC Guidelines tor Preventing the Transmission of Mycobacterium Tuberculosis in HealtlvCare Facilities, 1994

  • Stand-alone room pressure monitor verifies system operation

  • Direct pressure measurement provides continuous monitoring

  • Audible and visual alarms warn staff of unsafe conditions

  • Convenient keypad and display support local programming

  • Passwords prevent unauthorized access to monitor functions


Digital Interface Module Specifications

Display Range -0.20000 to +0.20000 in. H20


Low Alarm Range -0.19500 to +0.19500 in. H2O


High Alarm Range -0.19500 to +0.19500 in. H20


Low Alarm Contact SPST (NO) Max current 5A, max voltage 150VDC,


250VAC Min switch load 10 mA, 5VDCC


User Configurable Analog Output Signal: 0 to 10V or 4 to 20 mA Range: -0.100 to +0.100 in.


H2O or -0.0100 to +0.0100 in. H20



Operating Temperature 32 to 120T


Input Power Weight 24VAC, 5 W max 0.7 lb



Range -0.20000 to +0.20000 in. H2O


Accuracy 10% of reading
0.00001 in. H2O


Resolution 55 to 95T


Temp. Comp. Range 0.16 W at 0 in. H2O 0.20 W at 0.00100 in. H2O


Power 0.2 lb

View Complete Details

Radiology Protection Systems

We are also specialized in supply, installation and commissioning of lead Shielding and aprons for use in radiology environments. Our mission is to offer the very highest levels of radiation protection to our clients across world. We offer Lead Apron Repairs and associated products such as lead apron storage solution lead protective screens and shields, structural shielding, lead curtains and a host of associated products.


We supply Lead Aprons and associated X-Ray Shielding equipment directly from UK factory. Could provide full details of our extensive Radiology Products and Radiation Protective Products on request.


Lead Lined Drywall (also referred to as lead lined sheetrock or lead lined gypsum) is supplied with lead lining bonded to 1/2" or 5/8" drywall. Custom sizes for lead lined drywall are quoted upon request. We also provide lead lining bonded to specialty drywall such as moisture and mold resistant board. Lead Lined Drywall (lead lined sheetrock, lead lined gypsum wallboard) is supplied with 2" strips of the same lead thickness and height and 3/8" diameter lead discs.



  • Radiation Protection Products' Standard Lead Lined Door Frames consist of 16-gauge steel, a 2" face, and a 5-7/8" jamb depth. These lead lined door frames are set up and welded and can accommodate up to 1/2" thick lead lining. Our Lead Lined Door Frames are shipped with steel stud anchors that can be attached to the lead lined door frame either by welding or with steel fasteners if the lead lining does not exceed 3/32" thick.

  • We provide Sheet Lead with a consistent and high density manufactured from pure lead conforming to ASTM B-29, B-749 and Federal QQ-L-201F, QQ-L-171E. We use only the purest lead available. Our sheet lead is 99.94% pure lead. Absolutely no refining is performed in the manufacturing of our sheet lead. We interested in providing its customers with the highest quality sheet lead available in the market place today.

  • Note: Wherever sheet lead is cut, pierced or penetrated for any reason, assure it is rectified by use of same thickness sheet lead, plugs or other desired and approved methods.

View Complete Details

Pressure Reducing Station

All systems are manufactured to HTM 02-01 specifications are factory tested prior to dispatch and come with a comprehensive warranty.


Specification shown is a Duplex Regulator Station.



  • Fully compliant to HTM 02-01 specification

  • Flat faced 'o' ring pipeline unions

  • Includes gauge and pressure relief valve

  • Pre set and pressure tested in the factory prior to dispatch

View Complete Details

Retractable Pendant


  • Fully HTM 02-01 compliant

  • Sturdy Monologue design

  • Supports up to 9 gas and 8 power outlets

  • Maxi Pendants are adjustable in length by up to 300mm

  • Midi Pendants are available in different lengths to suit specific requirements

  • All gases are equipped with BS 739 NIST hoses for easy installation


Fully electrically and pressure tested in the factory prior to dispatch

View Complete Details

Rigid Pendant


  • Fully HTM 02-01 compliant

  • Sturdy Monologue design

  • Supports up to 9 gas and 8 power outlets

  • Pendants are available in different lengths to suit specific requirements

  • All gases are equipped with BS 739 NIST hoses for easy installation

  • Fully electrically and pressure tested in the factory prior to dispatch

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • UNICORN (UNICORN)
  • Dubai, UAE P.O. Box:-231673, sharjah
  • Share us via