ValTorque Valves Trading LLC dubai

Product Description: Product Description: A swing check valve is a check valve in which the disc, the movable part to block the flow, swings on a hinge to eithrswing onto the seat to block reverse flow or off the seat to allow forward flow. Product Features: Body and bonnet are bolted. The sealing is made of rubber (NBR, EPDM). The valve can be installed either in a horizontal or vertical position. It is virtually noiseless and capable of sealed closing  even in low pressure situations. Sizes: DN 50 – DN 200, Pressure: PN 10-PN 40 Applications : Swing check valves are suitable for non-corrosive fluids, liquids, gas, steam and waste water in water industry, water distribution networks, dams, power plants, and irrigation facilities. Technical Details: Product Group : Non-Return (Check) Valves Face to Face : DIN-EN-558-1 Series 48, ISO-5752 Series 48, DIN-3202-F6 Flanges : DIN-EN-1092-2 (DIN-2501) Body and Bonnet : EN-GJS-400-15(DIN-EN-1563, DIN-1693) Disc : EN-GJS-400-15(DIN-EN-1563, DIN-1693) Lever : EN-GJS-400-15(DIN-EN-1563, DIN-1693) Seal : EPDM / NBR Lever and Disc Pin : AISI 420 (1.4021) Cap : Brass Seat Ring : AISI 304 (1.4301) O-Ring : NBR Screws and Washer : A2 (DIN-931) Corrosion  Protection : All casting parts are coated with epoxy powder RAL 5005 by electrostatic method.

Product group :  Strainers،  Fields of application :  Distribution network، Water treatment، Industrial applications، Irrigation،  Medium :  Raw water، Drinking water،  Body :  Nickel Aluminum Bronze، Aluminum Bronze ، .Carbon steel, low alloy steel, etc، Stainless Steel، Ductile Cast Iron،  Disc :  Sealing :  NBR، EPDM،  Temperature °C :  Up to 70   Size (mm) :  1600 - 150   Pressure (bar) :  40 - 6   Price :  Description : Face to face: according to DIN EN 558-1 series 48 (DIN 3202-F6) Flanges: according to DIN EN 1092-1 (DIN 2501) Product Feature: Exchangeable screen made of corrosion and acid resistant steel. Flanges are raised face according to standard DIN 2526 type C. This type of strainer is produced by welding process.Provided with a drain screw at the bottom and a air release screw on the cover. Option: - Screen material and mesh size as per request. - Flanges according to ANSI standard - Delivery without flange for direct welding to the pipes Application: Strainers are used to prevent damaging system parts like: valves, pumps, etc. by external particles. Strainers separate dirt and external particles from flow. Corrosion protection: All casting parts are coated with epoxy powder RAL 5015 or 5005 by electrostatic method. Hydrostatic test pressure (bar) according to DIN EN 12266-1

Product group :  Accessories،  Fields of application :  Water transmission، Industrial applications، Wastewater، Water Distribution network، Irrigation، Fire protection network، Power house، Water treatment، Dams and hydropower،  Medium :  Wastewater، Raw water، Warm water، Drinking water، Sea water،  Body :  Nickel Aluminum Bronze، Ductile Cast Iron، Carbon steel, low alloy steel, etc، Stainless Steel، Aluminum Bronze ،  Disc :  Sealing :  NBR، EPDM،  Temperature °C :  Up to 70   Size (mm) :  3000 - 50   Pressure (bar) :  40 - 6   Price :  Description : Flanges according : DIN EN 1092-1 (DIN 2501)   Features: By using these joints, valves could easily be removed/dismantled from the pipeline. By turning the installed, bolts the length of the dismantling Joints can be reduced allowing enough space for removing the valve and sealing washers from the pipeline. For installing the valves and sealing washers, the length of dismantling joints can be adjusted by the adjusting bolts and therefore fastening the valve tightly to the pipe flanges. Coating: All parts are coated with electrostatic epoxy powder. Range of application: For media with maximum temperature of 70°C (for other temperatures as per request). Advantages: – Reliable design – Low space requirement – Compensates pipe length error – Discharges radial and axial forces to the valve

Product group :  Automatic Regulating Valves (ARV)،  Fields of application :  Water treatment، Distribution network، Industrial applications، Power house، Water transmission، Irrigation، Dams and hydropower، Wastewater،  Medium :  Warm water، Raw water، Drinking water،  Body :  Steel، Ductile Cast Iron، .Carbon steel, low alloy steel, etc،  Disc :  Ductile Cast Iron، .Carbon steel, low alloy steel, etc، Steel،  Sealing :  NBR، EPDM-NBR، EPDM،  Temperature °C :  Up to 70   Size (mm) :  1000 - 50   Pressure (bar) :  40 - 10   Price :  Description : Face to face: DIN EN 588-1 series 1(DIN 3202-F1) Flanges: DIN EN1092-2(DIN 2501) Product features: MIRAB control valves are used as regulating and control valves. The body is designed in either horizontal or diagonal shape, with the internal configuration suitable for fluid flow. The valves are controlled automatically by a pilot valve and water flow. Automatic control valves do not require an external power source, meaning that the fluid pressure is enough for opening and closing the valve. The body interior and exterior is coated with epoxy powder. The Automatic valve maintains the reduced downstream pressure at a constant value irrespective of the changes in upstream pressure and flow rate, also controls the outlet flow rate irrespective of pressure variation.

Butterfly Valve, Double Eccentric, Flanged Type, F4 MIRAB Butterfly valves are used for fluids such as raw water, drinking water, waste water, compressed air and neutral gases at temperatures up to 70° C and are designed with flow optimization to ensure minimum effects on the flow when the valve is open. This ensures that the whole system can be operated, with the lowest possible head loss coefficient. The valve discs of MIRAB butterfly valves are supported in the body with double eccentricity and Low friction bearings provide maximum radial support for higher shaft loads. The PTFE lined bearings having low coefficient of friction minimizes operating torque and reduces actuator size. They are slip-in place type, easy for assemble and disassembly. Corrosion protection of the body parts: Protection in accordance with quality assurance RAL-5015 or RAL-5005, at least 250 μm, epoxy coating, each “blue” coloured. Other coating options are available, please contact us for advice. Valve actuators: 1- Worm gearboxes with handwheel, 2- Spindel gearboxes with handwheel, 3- Electric rotary actuators, 4-Pneumatic Actuators, 5- Hydraulic Actuators   Product group :  Butterfly Valves (BV)،  Fields of application :  Water treatment، Water Distribution network، Water transmission، Fire protection network، Dams and hydropower، Irrigation، Industrial applications،  Medium :  Raw water، Drinking water، Industrial Wastewater، Sea water،  Body :  Ductile Cast Iron، Carbon steel, low alloy steel، Stainless Steel، Nickel Aluminum Bronze، Aluminum Bronze ،  Disc :  Nickel Aluminum Bronze، Aluminum Bronze، Ductile Cast Iron، Carbon steel, low alloy steel، Stainless Steel،  Sealing :  NBR، EPDM،  Temperature °C :  Up to 70   Size (mm) :  100 - 3000   Pressure (bar) :  6 - 64   Description : Design Standard: DIN EN 593 (DIN3354) Face to Face Dimension: DIN EN 558 -1 series 14 (DIN 3202 – F4) Flange Dimension: DIN EN 1092-2 (DIN2501)

Air Valve, Single Chamber, Double Orifice, Triple Function Product Description: In this type of valves aeration and air evacuation are carried out automatically in primary and secondary pipelines in sewage networks. These valves are light in weight due to their internal parts being made of plastic and their unique design and this allows installation in lower altitudes. I have this text from product catalogue. Product Features: Triple function: air release during the filling of the pipe system, air release under full operation and full working pressure, venting of air for vacuum breaking purposes. Automatic air venting of the fluid in the main pipe and supply lines. In these type of valves the fluid flow activates the venting operation. Large venting orifice allows large volumes of air to be released on start-up and enter the pipe for vacuum breaking on shut down. Small venting orifice allows volumes of air to be released under the fluid pressure. Unique feature and internal components of plastic materials result in low weight, allowing easy assembly on lines. Applications: This type of valve could be used with sewage mediums at minimum pressure of 0.3 bars to a maximum temperature of 70° C. Technical Details: Flanges : DIN-EN-1092-2 (DIN-2501) Body : EN-GJS-400-15[DIN-EN-1563(DIN-1693)] Bonnet : EN-GJS-400-15[DIN-EN-1563(DIN-1693)] Floater : AISI 304 (1.4301) Stopper : POM Seat : POM Guide Rod : AISI 304 (1.4301) Guide Screw : AISI 304 (1.4301) Sealing Rubber : NBR / EPDM Bolts and Nuts : A2 (DIN-912) Medium : potable water, raw water Temperature : up to 70 °C Size (mm) : 50 – 200 Pressure (bar) : 6 – 16 Corrosion  Protection : All internal components are made of plastic (HDPE 100) and are protected against corrosion. All casting parts are coated with epoxy powder RAL 5005 by electrostatic method.