Post Buy Requirement
VG
Sharjah, United Arab Emirates
Add Review

Our Products

  1. Valves & Valve Fittings 8 Products available
  2. Measurement Gauges & Fittings 3 Products available
  3. Filter Components 17 Products available
  4. Pollution Control Machines 7 Products available
  5. Industrial Valves 22 Products available
  6. Flush Bottom Outlet Valve 8 Products available
  7. Separating Machines 8 Products available
  8. Pumps, Pumping Machines & Parts 3 Products available
  9. Transmitter Device 5 Products available
  10. Food Strainers 16 Products available
  11. Others 60 Products available

Other Products / Services

TUBULAR BACKWASHING FILTER SYSTEMS








TUBULAR BACKWASHING FILTER SYSTEMS

TUBULAR BACKWASHING FILTER SYSTEMS Strainer systems are generally used for particle retentions as fine as 100 mesh (150 microns), with some exceptions. Filter systems are designed to retain particles as small as 1 micron. Tubular backwashing filter systems temporarily reverse the flow through the filter element, backwashing and dislodging embedded particulate. When continuous flow is required, the filter system will consist of multiple chambers, ensuring that a minimum flow and a constant discharge pressure is maintained during the cleaning cycle.



View Complete Details

LOFTREX MELT BLOWN POLYPROPYLENE FILTER CARTRIDGES

LOFTREX melt blown polypropylene filter cartridges have a multi-density design to simultaneously retain both coarse and fine particles. The outer portion consists of non-woven melt blown polypropylene for retention of larger particles. The inner area consists of a bi-component polypropylene and polyethylene fiber inner core to retain the finer particulate that traversed through the melt blown section. LOFTREX are constructed as a single piece, it is not a two piece design with an inner core.

No surfactants are present which could contribute to foaming or other undesirable performance and the material of construction satisfies FDA CFR 177 requirements

LOFTREX filter cartridges are offered in four designs encompassing both nominal and absolute rated retentions and single and multi-zone designs for retentions within 0.50 to 150 microns.

The following chart contains summary information and links to additional specifications and pricing by LOFTREX model.

View Complete Details

Level Transmitter








Level Transmitter

Level transmitters are the extension and development of pressure transmitter technology. According to the principle that the liquid with different specific gravity are in linear relation to the pressure generating at different height to realize the accurate measurement and transmission of volume, level height and weight of water, oil and paste-state matters.



View Complete Details

All Plastic Polypropylene, PVC Or CPVC Cartridge Filter Housings

All Plastic PVC or CPVC Cartridge Filter Housings are used to remove fine particles from process fluid. These housings are designed to use single, open ended cartridges 10", 20" or 30" in length. Cartridges must have a 1" ID and these housings do not accommodate stackable cartridges. Viton Seal is standard.



  • Temperature Ratings: 150 PSI at 70F OR 20 PSI at 200F FEATURES

  • All Plastic Construction will never rust or corrode

  • Compact, Easy to Install

  • No Metal in Contact with Fluid

  • Quick, Easy Filter Cartridge Changes

  • FPM (Viton) O-Ring Seal

  • Cartridges Available: 1, 5, 10, 30, 50, 75 and 100 micron retention in 10", 20" or 30" lengths

View Complete Details

Water Proof Crane Control Button Station

Crane Switch

"Water proof crane control button station is a new developed product with obtains the goods points of similar products in both here and abroad. The plastic cover is good-looking, strong and easy to catch. It has a reasonable advanced structure with a big capacity contact. The positive& negative direction control can be mechanically locked reciprocally. It also can be circuit locked reciprocally if necessary, which is secure and credit. It has a satisfactory button station with direct function switches and arrange. It has rubber and plastic cable cover and water-proof sealing, Thus it has a good performance(IP65 Level) in dustproof and waterproof and is very suitable for open air, rainy or snowy days, dusty environment or when it's operated by wet hands such as electric cucurbit, open air conveyer belt, and construction electric equipment remote control."

View Complete Details

Oval Gear Flowmeter








Oval Gear Flowmeter

Electro magnetic flowmeter is designed for accurate liquid flow measurement. It utilizes state-of-the-art technologies in digital signal processing and electromagnetic sensor design. The converter is able to measure bidirectional flow and totalize the flow in both forward and reverse directions separately. Magnetic flowmeter has been widely used to measure the volume of conductive liquids such as water, sewage, acid, alkali, salt water as well as mixture of liquids and solids.



View Complete Details

Electro Magnetic Flowmeter








Electro Magnetic Flowmeter

Electro magnetic flowmeter is designed for accurate liquid flow measurement. It utilizes state-of-the-art technologies in digital signal processing and electromagnetic sensor design. The converter is able to measure bidirectional flow and totalize the flow in both forward and reverse directions separately. Mag 888 magnetic flowmeter has been widely used to measure the volume of conductive liquids such as water, sewage, acid, alkali, salt water as well as mixture of liquids and solids.



View Complete Details

Switchgear Items








Switchgear items

We have big range of switch gear items from various manufacturers around the world. Main items include Cam Switch, CT Coil, Pedal switch, Panel Light, Limit switch, MCCB/MCB, electro SW, Proximity SW, Push buttons, panel meters analog and digitals, Sockets, Contactors, Pressure switch, Relays, distribution boards, Star delta panel, Main distribution boards.



View Complete Details

Socket Tee








Socket Tee

Socket Tee, also known as high pressure forging links, high pressure pipe fittings are suitable for high-pressure pipeline, its structure in many forms, according to the manufacturing process can be divided into (cold, hot) extrusion links, forging system links and welding links, welding thick-walled strengthening the links can be divided into welding links, welding a single bar to strengthen links and enhanced disc welded tee three. By Tee Tee external shape can be divided into oblique, orthogonal links and Y-shaped links



View Complete Details

Suction Diffuser















Suction Diffuser

"Suction Diffuser mounts to the suction side of a pump in either a horizontal or vertical position. It is designed to remove any foreign matter that may be hazardous to the pump or other system components, while providing the proper flow conditions to the pump. Where space is limited,
Suction diffuser can be used as an elbow (in some cases a reducing elbow) with a built in strainer for easy maintenance and system performance. Suction Diffusers are constructed from rugged cast iron castings that are machined to exacting specifications. These bodies have drilled flanges that are in accordance with ASME B16.1."




View Complete Details

Reducer Fittings

Chemical pipe diameter pipe is one of two different diameters for the connection. Diameter pipe forming process is usually used to suppress necking, necking Expanding suppression or repression plus expander, for some specifications of the different diameter pipe can be applied stamping. diameter pipe is divided into concentric reducers and eccentric reducers, we gave birth to the diameter pipe of different materials such as carbon steel reducer pipe, alloy pipe reducer, stainless steel diameter pipe low temperature steel reducer, high-performance steel-diameter pipe, can meet your different choices.

View Complete Details

Pipe Elbow







Elbow

Elbow is a commonly used pipe installed in connection with a pipe connecting two nominal pipe diameter the same or different, so the pipeline for a certain angle turn in the piping system, pipe elbow is to change the direction of the tube components in piping systems used in all the fittings, the largest proportion, about 80% are usually of different materials or thickness of the bend forming process to select a different present, commonly forming process seamless elbow hot pushing, punching, squeezing, etc.



View Complete Details

Metal Tube Rotameter








Metal Tube Rotameter

"It operates on the principle of variable area; the fluid in the metal tube raises the float in the taper tube increasing the area of passage of fluid. by a magnetic coupling the inner float movement through a series of linkages and counter weight. the tube and the float combination determines the flow rate.
The inner float magnetic field is detected by the high sensitive magnetic field detection sensor , enable us to show the digital readout. "



View Complete Details

Webster Non-Metallic Centrifugal Pumps

Webster Non-Metallic Centrifugal Pumps (mechanically sealed)

The C5, C7 and C8 Series pumps are designed specifically for continuous chemical duty service. They are rugged, precision molded, and feature dynamically balanced, enclosed impellers. Units are available in CPVC (Corzan), fiberglass reinforced Polypropylene, and PVDF (Solef ) with ratings of 1/3, 1, and 1-1/2 horsepower. The standard mechanical seal is a John Crane Type 21 single seal, carbon/ceramic. Other seal materials are available depending on the process fluid. And, water-wash seals are available for especially aggressive or "crystallizing" liquids. Pump models are also available with a rugged cast iron bearing frame for belt-drive or other coupled drivers.

View Complete Details

Cast Iron Exhaust Heads

Cast Iron Exhaust Heads Cast Iron exhaust heads forup to 40% by weight of the units flow capacity

Wright Austin cast iron exhaust heads are designed for long service life, the body, cover and separating element are constructed of high tensile cast iron which resists fractures and corrosion.

Following are links to the Wright Austin outline drawing and the pricing table. The components to build cast iron exhaust heads are usually stocked items and shipments made within 1 week after receipt of an order. The lead time for cast iron exhaust heads when castings are not in stock is typically 6-8 weeks. If the lead time is critical, please contact our office and obtain a lead-time estimate based upon the current manufacturing backlog. If you need assistance with proper selection, please fill-out our inquiry form.

View Complete Details

Air Treatment Unit

Its made by three elements: Filter, regulator and lubricator.
Its main function is to extend the pneumatic installations and its components lifetime, due its filtered the air and separated the liquids particles of it, keeps the constant pressure and also lubricate the moving parts, reducing the attrition.

Its body is made by aluminium and has different diameters of connection from to 1. The filtering accuracy its about 5, 10 and 25 microns; the working pressure its up to 145 psi and has different configuration availables

View Complete Details

Tee Fittings

Tee

Three of pipe fittings, pipe fittings. Links in the main channel to be used at the branch pipe. Links with other trails and reducer of points, such as Tee receiver end are the same size; Reducing the threepass over the head of the same size, and take over the branch pipe sizes smaller than receiver in charge for the use of seamless pipe manufacture in terms of links, now commonly used with hydraulic bulging process and hot forming two. to create criteriacan be divided into standard electricity, water, standard, American standard, Germany standard, Japanese standard, the Russian standard, etc.

View Complete Details

Cap Fittings

Cap

Cap is welded to the pipe end or in a tube end male thread on the block to cover the industrial pipe fittings. To close the pipeline, blocking the same role with the management. Convex caps include: hemispherical cap, oval tubecap, disc-shaped crown cap and ball cap our carbon steel pipe cap pipe cap, stainless steel pipe cap, alloy pipe caps, etc. to meet your needs.

View Complete Details

Flanging / Stub End

Flanging is rough or semi-finished edge along the outer edge or hole must be translated into the erection of the edge of the curve from the Press and the rough edge of the workpiece shape, flange can be divided into the hole (hole or hole) flange, flat surface flange and outer flange, etc. flange can replace some of the complex parts of the drawing process, improve the material plastic flow so as not to break or wrinkle, and we can supply carbon steel flange, flange alloy, stainless steel turning edges, etc. These products comply with ASME B16.9, ISO, API, EN, DIN, BS, JIS, GB etc standards and have passed the SGS, ABS certification.

View Complete Details

Cross Pipe Fittings

Cross

Cross is used at a branch pipe fittings. Cross has such diameter and reducer of points, such as Cross's take over the end of the path are the same size; Reducing the Crossto take over charge of the same size, The branch of the supervisors to take over take over the size of smaller than for the use of seamless pipe manufacture Cross, at present there is usually used in hydraulic bulging process and hot forming two. Crosshydraulic bulging process can be a shape, high production efficiency; Crosshead and shoulder wall thickness are increased. for seamless four-way hydraulic bulging process a larger tonnage of the equipment needed, its application to the forming material is relatively low work hardening tendency low-carbon steel, low alloy steel, stainless steel, including some non-ferrous materials such as copper, aluminum, titanium, etc.

View Complete Details

Quick Acting Line Blinds








Quick Acting Line Blinds

"Quick Acting Line Blinds are designed for applications where positive, visual indication of line closure/opening are required.
The position of the spectacle plate indicates whether the line is open or closed, reducing or eliminating the possibility of costly or dangerous situations. Quick Acting Line Blinds utilize O-ring seals to achieve the most effective shutoff. Our standard O-ring is located in a dovetail groove in both faces of the spectacle plate.Two stainless steel guide pins are located in the face of the body flange to ensure accurate alignment of the spectacle plate with the bore."



View Complete Details

Star Delta Switch








Star Delta Switch

Star/Delta switches allow speed control of three phase motors. They provide on/off and high/low speed by changing between the star or delta wiring configuration of the motor. Suitable for all three phase external rotor motors and most three phase motors fitted to axial flow fans. Simple Forward & Reverse switches with an isolation position are fairly common items, however there are numerous and complex ways motors can be wound, and matching control and switching arrangements can become very specific.



View Complete Details

Water Meter And Water Flow Meter








Water Meter and Water flow meter

We offer water meters threaded type and flanged type for various application and of various types. From our range of wter meters and water flow meters, we hag single jet, multi jet and woltman type. These positive displacement magnetic drive sealed register water flow meters are avaible in various sizes, high temperature 90 130 degree centigrade.



View Complete Details

Flanges

Flanges



  • Welding Neck Flange, Slip-On Flange, Socket Weld Flange, Screwed/Threaded Flange, Lap Joint flange, Orifice/Reducing Flange.

  • Sizes:1/2 - 36", Pressure

  • classes:from 150lbs to 2, 500lbs,

  • Materials:F316, F304, F316L, F304L, A105, F5, F11, F22, 15CrMo, 12CrMoV, Q235, 16Mn, 20# etc.

View Complete Details

Pressure Switches








Pressure Switches

"Pressure switches are used for regulating, monitoring and alarm systems in industrial applications. Suitable for gaseous media and air. They are fitted with a single-pole switch changeover (SPDT), and can control single-phase ac motors of up to 2 kW directly. These adjustable, pre-set Pressure Switches are suitable for pressure and/or flow detection in valve systems such as Deluge or Pre-action, or with other control valves for non-hazardous locations. The Pressure Switches are also used to provide a low pressure supervisory signal for valves Pre-action Systems or Pneumatically controlled deluge valves."



View Complete Details

Pneumatic Cylinders








Pneumatic cylinders

Our pneumatic cylinders will vary in appearance, size and function, they generally fall into one of the specific categories. However there are also numerous of types of pneumatic cylinder available, many of which are designed to fulfill specific and specialised functions. You just have to ask what you need for your specific application."



View Complete Details

Battery Supply Ultrasonic Water Meter








Battery Supply Ultrasonic Water Meter

Battery Supply Ultrasonic Water Meteris an innovative flow meter with static flow sensor based on the ultrasonic measuring principle. RBBW Ultrasonic Water Meter utilizes ultrasonic measuring methodology and microprocessor technology. All calculation and flow measuring circuits are designed on one single board, thus offering exceptional accuracy and reliability.



View Complete Details

Fabricated Carbon Steel Exhaust Heads

Fabricated Carbon Steel Exhaust Heads Exhaust heads forup to 40% by weight of the units flow capacity

Wright Austin custom fabricated carbon steel exhaust heads are used to reduce visible condensate plumes and to recover various chemistries prior to venting to atmosphere. Following are links to the Wright Austin outline drawing and the pricing table. The lead time for custom fabricated carbon steel exhaust heads is typically 6-8 weeks. If the lead time is critical, please contact our office and obtain a lead-time estimate based upon the current manufacturing backlog.

View Complete Details

Proximity Switch & Photo Sensor








Proximity Switch & Photo sensor

Proximity sensors are different type like Inductive / Capacitive / Namur / Ultrasonic. When an application calls for detecting a metallic target that falls within an inch of the sensing surface, inductive proximity sensors are apt for the task. Capacitive proximity switches contain 4 main components: plate, oscillator, detection circuit and solid state switch. The sensor operates in a similar fashion to a simple capacitor. When the power is turned on, the oscillator detects the amount of capacitance between the external target and the metal plate in the sensor. Both Inductive and Capacitive Proximity can both be termed as NAMUR switches. NAMUR switches are designed to be used in hazardous locations with very low voltage requirements. Ultrasonic sensors (also known as transceivers when they both send and receive) work on a principle similar to radar or sonar which evaluate attributes of a target by interpreting the echoes from radio or sound waves respectively.



View Complete Details

LOFCLEAN RESIN BONDED POLYESTER FILTER CARTRIDGES








LOFCLEAN RESIN BONDED POLYESTER FILTER CARTRIDGES

LOFCLEAN filter cartridges are constructed of long acrylic fibers, bonded together with phenolic resin, forming a rigid, one piece depth filtration cartridge.

LOFCLEAN filter cartridges are designed for paints, inks, lacquers, varnishes, adhesives, sealants and similar viscous materials due to their rigid design. LOFCLEAN filter cartridges are also used for filtration of machine tool coolant and lubricants such as oil and grease due to their broad chemical compatibility.

LOFCLEAN filter cartridges have nominal retentions from 1 to 100 microns.



View Complete Details

Socket Elbow








Socket elbow

Elbow socket by the socket, socket, bent parts, bearing slots etc., characterized in that slot in the socket on the bearing, socket, Socket located at both ends of the curved portion. In the piping system, the elbow is to change the direction of pipe fittings.Divided by the angle, there are 45 and 90 180 three most commonly used, and the other according to project needs also include other non-normal 60 angle elbow.Socket elbow cast iron materials, stainless steel, alloy steel, forging iron, steel, nonferrous metals and plastics.Socket elbow main manufacturing standards generally GB/T14626, ASME B16.11, BS3799.



View Complete Details

Socket Cross








Socket Cross

Stone from the jack socket, socket, bent parts, bearing slots etc., characterized in that slot in the socket on the bearing, socket, Socket located at both ends of the curved portion. In the piping system, the socket is to change the four-way direction of the pipe fittings.Socket Stone materials are cast iron, stainless steel, alloy steel, forging iron, steel, nonferrous metals and plastics.Socket Stone's main manufacturing standards generally GB/T14383, ASME B16.11, BS3799.



View Complete Details

Alternator Of Harmonic Wave Self-excitation

Alternator

The alternators are of harmonic wave self-excitation constant voltage system and automatic voltage control excitation constant voltage system, both of them have excellent dynamic characteristic performance, convenient and reliable in operation.Alternators Specially designed, self-excited and self-regulated in screen protected drip-proof enclosure, available in Single Phase (230V/50HZ) and Three Phase (415V/50HZ) at 1500 RPM,

View Complete Details

Pneumatic Accessories








Pneumatic Accessories

Pneumatic accessories keep their function to connect different parts, to transfer the pressure power or the lower the noise from the pneumatic system, so the pneumatic system can work smoothly and noiselessly, Pneumatics & hydraulics has a wide range of pneumatic accessories for different situations, we have different kinds of plastic push in fittings, metal push in fittings, pneumatic connectors, PU tubing, PA tubing, silencers, pressure gauges, air guns, gas springs.



View Complete Details

Socket Olet








Socket olet

Socket branch block is used more often in recent years abroad, for the branch connection reinforcement-type tube, instead of the traditional use of the reducing tee, reinforcement plates, such as strengthening the branch pipe connection type, with a safe, reliable, lower cost , the construction is simple, to improve media flow, series standardized design used to facilitate other advantages, especially in the high-pressure, high temperature, large-diameter, thick-walled pipe is increasingly widely used, replacing the traditional branch connection method. Branch pipe seat body with high-quality forgings, pipe materials with the same timber, carbon steel, alloy steel, stainless steel. Are used with the head of branch pipe welding branch pipe and branch pipes or other seat tube (such as short tubes, plugs, etc.), instrumentation, valves, connections with butt welding, socket welding, threaded and other types.



View Complete Details

Butt Weld Fittings








Butt Weld Fittings




    • Standard: ANSI B16.9, ANSI B16.28, DIN 2605, DIN2615, DIN2616, JIS B2312, JIS B2313,

    • Material: Carbon steel, stainless steel, Alloy Steel,

    • Schedule: SCH 10 SCH 160, Size: 1/2-48,

    • Type: 45, 90, 180 Degree Long/Short Radius Elbows, Equal Tees, Reducing Tees, Equal Crosses, Reducing Crosses, Concentric Reducers, Eccentric Reducers, Caps, Barred Tees,

    • Induction Bend: Radius: 3D, 4D, 5D, 6D, 8D, 10D

    • Angels: 22.5Deg, 30Deg, 45Deg, 60Deg, 90Deg





View Complete Details

AC Invertors

AC Invertors

"Meeting international standards the Inverter range allows customers to specify the performance and features they need. The needs of the market are wide and varied, and offer a homogeneous range of standard products for everything from simple speed control to complex applications with high requirements in respect of drive behavior and functionality. Inverters are reliable in respect of operation, flexible in terms of application, easy to commission and meet high standards of quality. We can provide a solution to suit any requirement in the power range between 0.25 and 400 kW. Common operating software is used throughout and delivery is normally from stock"

View Complete Details

Level Swithces








Level Swithces

We are offering level switch,
liquid level switches are electromechanical devices that open or close an electrical circuit in response to a change in the level of a liquid in storage areas such as tanks, reservoirs, sumps and wells. they are widely used throughout many industries and applications that use liquid process systems such as drinking water systems and the oil and gas industry.



View Complete Details

Insertion Density Meter








Insertion Density Meter

Insertion Density Meteroperates on the vibrating element principle, the element in this case being a tuning fork structure that is immersed in the liquid being measured. The tuning fork is excited into oscillation by a piezoelectric device internally, secured at the root of one tine. The frequency of vibration is detected by a second piezoelectric device, which is secured in the root of the other tine.



View Complete Details

Auto Start Control Module

Auto Start Modules

"Auto start Control Module. The module is used to automatically start a generator set, upon application of a remote signal or by manual control.
The module also provides indication of operational status and fault conditions, automatically shutting down the genset and indicating failures by means of an LCD display. used in generator applications but can be applied anywhere a basic auto-start operation is required. Basic functions include engine crank/rest, crank disconnect, over speed, low oil pressure, high engine temperature, low levels and spare shutdowns"

View Complete Details

AC Cast Iron Float Style Drain Traps

Wright-Austin Model 300 Series-AC Cast Iron Float Style Drain Traps

Wright Austin Model 350 float drain trap is designed to remove gummy fluids and varying volumes from pipelines. Following are links to the Wright Austin outline drawings and the pricing table.

The components to build model 350 float style drain traps are usually stocked items and shipments made within 7-10 days after receipt of an order. The lead time for cast products when castings are not in stock is typically 6-8 weeks. If the lead time is critical, please contact our office and obtain a lead-time estimate based upon the current manufacturing backlog.

View Complete Details

Speed Controller

Speed Controller

"Speed Controller Control the speed of your motor with this versatile and reversible 60W DC motor speed controller which comes with a 4.7k potentiometer and rocker switch. The controller has two modes of operation: Fixed or Variable frequency. The fixed frequency mode of operation runs the controller at 100 Hz. In the variable frequency mode of operation, the frequency is adjustable from 244 Hz to 3.125 KHz. Duty cycle is fully adjustable from 0% to 100% in both modes."

View Complete Details

Generators








Generators

"Our products are all kinds of generators, generating set, from 1KVA to 2000KVA., electrical Motors .5 KV to 25KV.

We can supply you with different brands of engines and AC generators, such as Perkins, Cummins, Caterpillar & alternator from Stamford, Leroy somer, etc. Includes open and enclosed generator New sets as well as used one"



View Complete Details

RTD Thermocouples








RTD Thermocouples

Resistance thermometers, also called resistance temperature detectors or resistive thermal devices (RTDs), are sensors used to measure temperature by correlating the resistance of the RTD element with temperature. Most RTD elements consist of a length of fine coiled wire wrapped around a ceramic or glass core. The element is usually quite fragile, so it is often placed inside a sheathed probe to protect it. The RTD element is made from a pure material whose resistance at various temperatures has been documented. The material has a predictable change in resistance as the temperature changes; it is this predictable change that is used to determine temperature.



View Complete Details

Electrical Motors

Electrical Motors

"Electric motors involve rotating coils of wire which are driven by the magnetic force exerted by a magnetic field on an electric current. They transform electrical energy into mechanical energy. We stock an extensive range of electric motors for sale, including electric motor power inverters and inverter drives. Our engineers possess an extensive knowledge of all brands of servo, including Siemens, ABB, Bosch, Gettys, Yaskawa, Indramat, Allen Bradley, SEM and Parvex."

View Complete Details

Expansion Joints








Expansion Joints

"An expansion joint or movement joint is an assembly designed to safely absorb the heat-induced expansion and contraction of various construction materials, to absorb vibration, to hold certain parts together, or to allow movement due to ground settlement or earthquakes. They are commonly found between sections of sidewalks, bridges, railway tracks, piping systems, ships, and other structures.




    • Classifiction: Rubber, Metal Bellow, External Pressureized.

    • siz: DN 25 to DN 250, Flanged size as per DN 2501".





View Complete Details

Air Compressors


Air Compressors







"A gas compressor is a mechanical device that increases the pressure of a gas by reducing its volume.

Compressors are similar to pumps: both increase the pressure on a fluid and both can transport the fluid through a pipe. As gases are compressible, the compressor also reduces the volume of a gas. Liquids are relatively incompressible; while some can be compressed, the main action of a pump is to pressurize and transport liquids".



View Complete Details

Float Style Drain Traps In Cast Iron

Wright-Austin Model 90-AC and 95-AC Float Style Drain Traps in Cast Iron, Carbon Steel and 316SS

"Wright Austin float style drain traps provide an economical method for draining condensate and fluid from gas liquid separators. The components to build drain Wright Austin float drain traps are usually stocked items and shipments made within 7-10 days after receipt of an order. The lead time for cast products when castings are not in stock is typically 6-8 weeks. If lead time is critical, please contact our office and obtain a lead-time estimate based upon the current manufacturing backlog. If you need assistance with proper selection, please fill-out our inquiry form."

View Complete Details

Automatic Voltage Regulators (AVR)








Automatic Voltage Regulators (AVR)

The automatic voltage regulator or AVR, as the name implies, is a device intended to regulate voltage automatically: that is to take a varying voltage level and turn it into a constant voltage level. These outstanding Genset Voltage Regulators are engineered as the top replacement to most popular genset available in the world. The Voltage Regulator are suitable for use under various type of excitation, for example self excited, separately excited, Auxiliary Winding Regulation Excitation Principle (AREP) and more.



View Complete Details

Webster Non-Metallic Centrifugal Pumps D And S Series








Webster Non-Metallic Centrifugal Pumps D and S Series

The D1 and DD1 are enhanced replacements of the durable SS1 series pump. The 1/8 HP motor with 1/2" diameter extended shaft and (4) precision machined pump mounting pads ensure trouble free performance for the more demanding industrial applications.Precision molded, dynamically balanced, semi-open impellers with a unique "tandem" design allow for its ability to operate against closed discharge valves. These rugged, chemical duty pumps are available in CPVC (Corzan), fiberglass reinforced Polypropylene, and PVDF. Precision molded, dynamically balanced, "enclosed" impellers allow pumping of abrasive solutions and operating against closed discharge valves.



View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Saad Chohan (Vanguard General Trading Fzc)
  • Hamriya Free Zone G37 -08, P.O.Box 49108 Sharjah - UAE
  • Share us via