Post Buy Requirement
VM
SHARJAH, United Arab Emirates
Add Review

Our Products

  1. Ferrous & Non Ferrous Metal Scrap 6 Products available
  2. Metal Scrap 3 Products available
  3. Aluminium Scrap 5 Products available
  4. PVC, PP & Plastic Products 8 Products available
  5. Non Ferrous Metal Scrap 9 Products available
  6. Zinc Scrap 5 Products available
  7. Others 40 Products available

Other Products / Services

Copper Wire

Shall consist of No.1 bare, uncoated, unalloyed copper wire scrap nodules, chopped or shredded, free of tin, lead, zinc, aluminum, iron, other metallic impurities, insulation and other foreign contamination.


Minimum copper 99%. Gauge smaller than no. 16B & S wire and hydraulically compacted material subject to agreement between buyer and seller

View Complete Details

Old Pure Aluminum Wire And Cable

Shall consist of old, unalloyed aluminium wire and cable containing not over 1% free oxide or dirt and free from hair wire, wire screen, iron, insulation and other non-metallic items.

View Complete Details

Aluminium Tough/Taboo

Mixed Low Copper Aluminum Clippings and Solids consist of new, clean, uncoated and unpainted low copper aluminum scrap of two or more alloys with minimum thickness of 0.015 inches (.38 mm) and to be free of 2000 and 7000 series, hair wire, wire screen, punching less 1/2 inch (1.25 cm) diameter, dirt and non metallic items. Grease and oil not to total more than 1% variations to this specification should be agreed upon prior to shipment between buyer and seller.

View Complete Details

GREEN NATURAL HOTWASHED PET FLAKES



















GREEN NATURAL HOTWASHED PET FLAKES
100% PET green color Flakes .
0% PVC
Lable and other impurities less than 100ppm
View Complete Details

Battery Lugs

To be free of scrap lead, wheel weights, battery plates, rubber and/or plastic case material and other foreign material. Aminimum of 97% metallic content is required.


Review packaging specifications and regulatory status pertaining to shipping with buyer prior to sale


View Complete Details

E.C. Aluminum Nodules

Shall consistof clean E.C. aluminum, chopped or shredded, free of screening, hair wire, iron, copper insulation and other non-metallic items, Must be free of minus 20 mesh material. Must contain 99.45% aluminum content.

View Complete Details

Aluminum Throb

Shall consist of aluminum scrap which has been sweated of melted into a form or shape such as ingot, sow or slab for convenience in shipping. to be free from corrosion, dross or any non-aluminum inclusions. Should be sold subject to sample or analysis.

View Complete Details

Aluminium Auto Or Truck Wheels

Aluminium Auto or Truck wheels Shall consist of clean, single-piece, unplated aluminum wheels of a single specified alloy, free of all inserts, steel, wheel weights, valve stems, tires, grease and oil and other non-metallic items. Variations to this specification should be agreed upon prior to shipment between the buyer and seller.

View Complete Details

Copper Scrap Berry

Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No.16 B & S wire gauge, free of burnt wire which is brittle. Hydraulically briquetted copper subject to agreement.

View Complete Details

Copper Scrap Cliff

Shall consist of miscellaneous, unalloyed copper scrap having a nominal 96%copper content (minimum 94%) as determined by electrolytic assay.


Should be free of the following: Excessively leaded, tinned, soldered copper scrap; brasses and bronzes; excessive oil content, iron and non- metallics; copper tubing with other than copper connections or with sediment; copper wire from burning, containing insulation; hair wire; burnt wire which is brittle; and should be reasonably free of ash. Hydraulically briquetted copper subject to agreement.

View Complete Details

Cupro Nickel Solids

Cupro Nickel solids Shall consist of old, and/or new, segregated (normally accepted analysis grades) either 70/30, 80/20, 90/10 cupro nickel tube, pipe, sheet, plate, or other wrought solid forms. M aximum2%sediment allowable. Any other forms of cupro nickel solids such as castings, gates, risers, spills, etc., packaged separately, may or may not be included, only upon agreement between buyer and seller. M ust be free of foreign attachments and all other contamination. Other particulars concerning physical description, analysis and packaging to be agreed upon between buyer and seller.

View Complete Details

Yellow Brass Turnings

Shall consist of yellow brass turnings, free of aluminum, manganese and composition turnings, not to contain over 3% of free iron, oil or other moisture; to be free of grindings and babbitts. To avoid dispute, to be sold subject to sample or analysis.

View Complete Details

Mixed Hard/Soft Scrap Lead

Shall consist of clean lead solids, free of other materials, such as drosses, battery plates, lead covered cable, collapsible tubes, type metals, aluminum, zinc, iron and brass fittings, dirty chemical lead and radioactive materials.


Review packaging specifications and regulatory status pertaining to shipping with buyer prior to sale.


View Complete Details

LEAD COVERED COPPER CABLE

LEAD COVERED COPPER CABLE


To be free of arm ored covered cable, and foreign material


View Complete Details

Aluminium Copper Radiators

Shall consist of clean aluminum and copper radiators and /or aluminium fins on copper tubing, free of brass tubing, iron and other foreign contamination.

View Complete Details

Aluminum Talon

Shall consist of new, clean, unalloyed aluminum wire or cable free from hair wire, ACSR, wire screen, Iron, insulation and other non-metallic items.

View Complete Details

Mixed Aluminium Borings Turnings










Telic
Shall consist of clean, uncorroded aluminium borings and turnings of two or more alloys and subject to deductions for fines in excess of 3% through a 20 mesh screen and dirt, free iron, oil, moisture and all other non-metallic items. Material containing iron in excess of 10% and/or free magnesium or stainless steel or containing highly flammable cutting compounds will not constitute good delivery. To avoid dispute, material should be sold on basis of definite maximum zinc, tin and magnesium content.
View Complete Details

Mixed Aluminum Castings

Shall consist of all clean aluminum castings which may contain auto and air plane casting but no ingots, and to be free of iron, brass, dirt and other non-metallic items. Oil and grease not to total more than 2%.

View Complete Details

Aluminum Terse

Shall consist of clean, new, pure, uncoated 1000 and/or 3000 and/or 8000 series alloy aluminum foil, free from anodized foil, radar foil and chaff, paper, plastics or any other non metallic items. Hydraulically briquetted material and other alloys by agreement between buyer and seller.

View Complete Details

Aluminum Forgings And Extrusions










Tread
Shall consist of new, clean, uncoated aluminum castings, forgings and extrusions of one specified alloy only and to be free from sawings, stainless steel, zinc, iron, dirt, oil, grease and other non-metallic items.
View Complete Details

Brass Shell Cases Without Primers

Shall consist of clean fired 70/30 brass shell cases free of primers and any other foreign material

View Complete Details

Brass Small Arms And Rifle Shells

Shall consists of clean fired 70/30 brass shell cases containing the brass primers and which contain no other foreign material.

View Complete Details

Yellow Brass Rod Turnings

Shall consist strictly of rod turnings, free of aluminum, manganese, composition, Tobin and Muntz metal turnings; not to contain over 3% free iron, oil or other moisture; to be free of grindings and babbitts; to contain not more than 0.30% tin and not more than 0.15% alloyed iron.

View Complete Details

Yellow Brass Rod Ends

Shall consist of of new, clean rod ends from free turning brass rods or foreign rods not to contain more than 0.30% tin and not more than 0.15% alloyed iron, to be free of Muntz metal and naval brass or any other alloys. To be in pieces not larger than 12" and free of foreign matter.

View Complete Details

Mixed Unsweated Auto Radiators

Shall consist of mixed automobile radiators, to be free of aluminum radiators, and iron-finned radiators.


All radiators to be subject to deduction of actual iron. The tonnage specification should cover the gross weight of the radiators, unless otherwise specified.

View Complete Details

Old Zinc Die Cast

Shall consist of miscellaneous old zinc base diecastings, with or without iron and other foreign attachments. Must be free of borings, turnings, dross pieces, chunks, melted pieces and skimmings.


All unmeltables, dirt, foreign attachments, and volatile substances (such as rubber, cork, plastic, grease, etc.) are deductible. Material containing in excess of 30% iron will not constitute good delivery.

View Complete Details

Stainless Steel Scrap

Shall consist of clean 18-8 type stainless steel clips and solids containing max.7% nickel, 16% chrome, and have a max. of .50% molybednum, .50% copper, 0.045% phosphorous and .03% sulfer and otherwise free of harmful contaminants. Particularly concerning physical description, grading, addtional analysis and preparation to be agreed upon between buyer and supplier.


View Complete Details

Hms1 Scrap

We are one of the renowned exporters and suppliers of HMS 1 that is procured from trusted vendors. Prepared from wrought iron or steel scarp, these heavy melting steel are processed in a manner to insure compact charging. We have for our clients two types of industrial heavy melting scraps which include HMS 1 (ISRI 200) and HMS1 (ISRI 201).


HMS 1 (ISRI 200):



  • No. 1 heavy melting steel

  • Wrought iron, steel scrap 1/4 inch and over in thickness

  • Individual pieces not over 60 x 24 inches (charging box size)



HMS1 (ISRI 201): No. 1 heavy melting steel



  • 3 feet x 18 inches

  • Wrought iron, steel scrap 1/4 inch and over in thickness

  • Individual pieces not over 36 x 18 inches (charging box size)

View Complete Details

Hms Scrap

We offer an extensive range of heavy melting steel scraps that meet the raw material requirement of varied metal manufacturing industries. Commonly known as heavy metal or melting scrap, this scrap is black in color and is attained from steel scrap and wrought iron. These industrial heavy melting scraps are extensively used for optimum quality and high metal content.



View Complete Details

Plated Zinc Die Cast

Shall consist of new or unused clean, plated zinc base diecastings, free from corrosion.

View Complete Details

Lead Battery Plates

Specify whether automotive, industrial or mixed. Also whether they are groups or loose.


The only other metallic that might be included could be lead connectors.To be free of non-metallics, i.e., plastic or rubber, with the exception that separators may be included.


Material to be dry. May be bought on an essay basis or a flat price.Submarine plates subject to negotiation. Review packaging specifications and regulatory status pertaining to shipping with buyer prior to sale.

View Complete Details

Copper Wire Nodules

Shall consist of No.1 bare, uncoated, unalloyed copper wire scrap nodules, chopped or shredded, free of tin, lead, zinc, aluminum, iron, other metallic impurities, insulation and other foreign contamination.


Minimum copper 99%. Gauge smaller than no. 16B & S wire and hydraulically compacted material subject to agreement between buyer and seller


View Complete Details

Aluminium Taldon

Shall have a minimum density of 14 pounds percubicfoot (225kg/m3), and a maximum density of 17 pounds per cubic foot (273kg/m3) for unflattened UBC and 22 pounds per cubic foot (353kg/m3) for flattened UBC. Size: Minimum 30 cubic feet (.85m3), with bale range dimensions of 24"to 40"(61to132cm) by 30"to 52"(76to132cm) by 40"to 84"(102to213cm).The only acceptable tying method shall be as follows: four to six 5/8"(1.6cm) x .020"(5mm) steel bands, or six to ten # 13 gauge steel wires (aluminum bands or wires are acceptable in equivalent strength and number).

View Complete Details

Pet Packing Band

The PET packing band, known as plastic band, is mainly made of polymer. Its a latest protecting environment material instead of steel strap and is well used in the steel, chemical, aluminum, papermaking, brick making, nuts, , electron, textile and wood industry, It has extensively used all over the world.








































CHARACTERISTIC:
High intensity:Against considerably with the standard steel bdlt.
High tenacity:Make sure the goods safe in transportation.
Secure quality:Does not have sharp fringeDoes not have pressure mark Fleecing hurts problemThe damage be unlikely not be created to operation personnel staff.
Environmental protection:Convenient recoveryAccord with the environmental protection demand.
Adaptiveness:Endure high temperature Inside dampBe able to adapt to the different climates changes.
Beautiful outside quality:No rustyNo pollution .
Endure high temperature:The melting point is 260120 Below will not become deformed.
Economy:The unit cost merely is the 1/3 that the iron sheet was brought.
View Complete Details

Washed Flakes



























Hot washed natural color PET flakes
PVC less than 500ppm
Labels and other impurities less than 100ppm
Particle Size 8-12mm
IV 0.6-0.71mm
Packing 25kgs bag , Super sacks , jumbobags depending upon origin
View Complete Details

Unwashed Flakes

We offer HDPE unwashed flakes , these are typically blow molding grade material , with approx 2-3 % PP and approx 1-2% max injection molding grade .

View Complete Details

LDPE REGRINDS FROM CABLES













Approx 95-98% would be PE balance would be metal , pvc , rubber etc as impurities . The material is obtained from rejected cables and is passed through electro static separator .
View Complete Details

Granules

We supply various REPO pallets of LDPE & LLDPE black,
white, colored, mix, which are used for extrusion, blow
or injection molding.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Vienna Metals Trading FZC (Vienna Metals Trading FZC)
  • P.O. BOX 122055, SAIF ZONE SHARJAH, UNITED ARAB EMIRATES, United Arab Emirates
  • Share us via