MOLY GREASES are solid lubricant containing multipurpose Lithium hydroxy stearate soap greases based on paraffinic mineral oils. MOLY GREASES also contain antioxidants, anti corrosion and extreme pressure additives together with molybdenum disulfide for enhanced extreme pressure and anti-seize performance. MOLY GREASES exhibit good water resistance and excellent adherence to metal surfaces.
MOLY GREASES are suitable for plain bearings and gears in wide variety of applications. These can also be used in slow speed rolling and angular contact bearings having adequate clearance to take care of solid particles.
MOLY GREASES are particularly recommended for use under boundary lubrication conditions, especially where sliding motion or vibrations can cause the grease to squeeze out from the surfaces in contact. MOLY GREASES provide protection against fretting corrosion, typically associated with splined shafts, pivot pins, constant velocity joints, other ball joints and on parts subjected to oscillating and sliding motion. MOLY GREASES are generally recommended for all difficult service conditions such as dust, exposure to vapours and rains, recurrence of shock loads.
MOLY GREASES can also be dispensed through centralised lubrication systems.
|SL.NO||CHARACTERISTICS||MOLY GREASE||TEST METHOD|
|3||Soap type||Lithium||ASTM D-128|
|4||Base oil viscosity at 100oC, cSt||17-19||ASTM D-445|
|5||Base oil viscosity at 40oC cst||290||ASTM D-445|
|6||MoS2 % min.||3||ASTM D-128|
|7||Worked Penetration, 60/60 strokes at 25oC, mm-1||265-295||ASTM D-217|
|8||Drop Point, oC, min.||185||ASTM D-566|
|9||Copper Strip corrosion||Pass||ASTM D-4048|
|10||Timken OK load (lbs),min||50||ASTM D-2509|
|11||Four ball weld load, kgs.||250||ASTM D-2596|
Ms. Rupa Alamelu
P.O BOX – 49012, SHARJAH HAMARIYAH FREE ZONE – U.A.E, Sharjah, , United Arab EmiratesView Mobile No.