MP 2 Grease is made from high quality mineral oil thickened with lithium soap and fortified with functional additives to impart oxidation and corrosion resistance. MP 2 conforms to IS : 7623 (1993) and IPSS-1-09-006 (97) specifications.
MP 2 Grease is recommended for multipurpose applications including high performance wheel bearings, chassis points, and water pump bearings. They are pump able and can be dispensed by any greasing system. MP 2 Grease is recommended for all normal grease application areas.
|S.NO.||TEST||METHOD||CONTROL LIMIT||TYPICAL RESULTS|
|5||Penetration @ 25°C|
|6||Worked, 60 strokes||ASTM D-217||265||295||280|
|7||Worked, 10,000 strokes||ASTM D-217||265||295||290|
|8||Dropping Point, °C||ASTM D-2265||180°||-||>196°|
|9||Timken EP Test, OK Load, Kg||ASTM D-2509||10||-||12|
|10||Weld Load, kg||140||-||150|
|11||Load Wear Index (Kg)||28||-||30|
|12||Four Ball Wear Test, scar diameter, mm||ASTM D-2266||-||0.6||0.55|
|13||Water Washout Test, % wt. Loss @ 80°C||ASTM D-1264||-||12||5.5|
|14||Oxidation Stability, 100 hr. psi loss @ 100°C||ASTM D-942||-||10||5|
|15||Rust Prevention||ASTM D-1743||-||-||Pass|
|16||Copper Strip corrosion||ASTM D 4048||-||1B||0|
|17||Wheel Bearing Leakage, gm||ASTM D-4290||-||-||1.6|
|18||Base Oil Properties||-||-||-||-|
|19||Viscosity: @ 40°C, cSt||ASTM D-445||90||105||100|
|20||Viscosity: @ 100°C, cSt||ASTM D-445||10||-||>11|
Ms. Rupa Alamelu
P.O BOX – 49012, SHARJAH HAMARIYAH FREE ZONE – U.A.E, Sharjah, , United Arab EmiratesView Mobile No.