dubai, United Arab Emirates
Our Products
ZX Loading Bellows ensure efficient, dust-controlled discharging of dry, dusty bulk solids into ships, barges, or stockpiles.
The TR Loading Bellows Positioner moves loading bellows horizontally when loading trucks or rail cars.
The driver can stop the vehicle in the designated loading area without having to worry about being in the centre of the loading area.
LAMBDA operates through deflection of the material flow onto the inclined plate linked to an off-centre load cell. The measuring unit connected with the load cell continuously reads the feed rate.
MU Live Bin Bottoms are the ideal solution for discharging particularly difficult materials from polygonal hoppers or silos. Among others, they are used for extracting biological or industrial sludge, paper scrap, wood chippings, sawdust, as well as flour or bran in the flour milling industry.
Produced in large series, the RSM Manual Bag Opener shows an industrial design as a result of in-depth assessment of user requirements in a number of industries.
Among all the different types of machines on the market, the RSA Automatic Bag Splitter by EXTRAC is the best value for money. The RSA offers cutting edge technology with few moving components and a simple operating principle.
For large amounts of empty bags to dispose of the COM Bag Compactor is a highly efficient yet economic solution. Bags are compressed to a fraction of their original volume while the workplace is kept perfectly tidy.
The TCB Bulk Biomass Conveying System is a complete and versatile screw conveyor system which extracts the bulk fraction of the biomass from the mixer/hopper, lifting and charging it into the digester of the biogas production plant.
EHN-type Bucket Elevators are specialised for vertical elevation of aggregates and minerals in continuous heavy-duty applications. They are especially designed to operate at low speed and are manufactured from standardised modular components.
EI-type Bucket Elevators are the ideal solution for vertical elevation of fine aggregates and minerals. They are especially designed to operate at low speed and are manufactured from standardised modular components.
Specialised for conveying cereals, flour or similar materials, TCG Chain Conveyors enable material discharge in different points through intermediate outlet spouts, equipped with electrically operated slide valves especially designed for this purpose.
Apart from various industrial processes, TCG Chain Conveyors are widely used in storage plants for cereals and similar products.
Ball Segment Valves offer an unobstructed cross section when open. Free material flow is the result. Viewed from the top, no other free-flow valve offers any more compact overall dimensions. To intercept material flow from bins, hoppers, silos, processing machines, or pneumatic conveying of materials showing poor flowability, the use of a VSS Ball Segment Valve may be the most appropriate choice. VSS Ball Segment Valves can be used in virtually all industries.
CV-type Hand Wheel Actuators are used as auxiliary emergency actuators for AE-type Electric Gear Motor Actuators.
The CV hand wheel is inactive when the AE-type swivel actuator is working.
CRG-type Electric Gear Motor Actuators are suitable for opening and closing VLQ, VLC, VLR and VDI-type Slide Valves.
LSM 6-type limit switches are mandatory for the opening and closing of the Slide Valves.
ATEX-versions are available on request.
CP Pneumatic Actuators are suitable for 90-degree opening and closing of WAM Butterfly Valves, WAM VSS-type Ball Segment Valves, as well as WAM DVA-type Diverter Flap Valves.
CP actuators come with splined shaft coupling bush according to DIN 5482
Operating pressure amounts to 2 8 bar (29 116 PSI).
ZN Loading Bellows are an economic yet efficient solution for dust-controlled loading of dry, non-dusty bulk solids into tankers.
The WBN Batch-Type Ribbon Blender, with its slowly turning single shaft double counter-pitch ribbon screw, is the ideal machine to obtain high quality mixtures with fragile materials, at the same time conserving the physical properties of the product.
In terms of function and economy, the WETDUST Dust Conditioner is the ideal machine for evacuating, conditioning and disposal of industrial dust. Due to its particular technical features, its innovative design and extremely short processing time, WETDUST enables dust-free discharging on open trucks or belt conveyors.
In terms of function and economy, the CLAYGRAN Dust Conditioner is the ideal machine for the evacuation, conditioning and disposal of industrial ceramic dusts. Due to its particular technical features, its innovative design, and extremely short processing time, CLAYGRAN enables dust-free discharging on open trucks or belt conveyors.
WMPC is a smart power and water supply control panel for WETMIX mortar or plaster mixers.
Providing from 20 to 26, 000 kg of centrifugal force with 2, 4, 6 or 8 poles, the standard range of MVE External Electric Motovibrators is suitable for all kinds of vibrating equipment virtually in all industries. The motovibrators come with single phase, tree-phase or DC motor with ATEX ExII3D and ETL, Class II, Division 2 certification for application in the presence of potentially flammable dusts in hazardous environments.
U025 and U060 Aerator Nozzles represent the most economic solution to ensure material flow from silos, bins or hoppers.
U025 / U060 Aerator Nozzles can be easily fitted or retrofitted in existing installations.
An engineering polymer casing, co-moulded with a sintered nozzle (brass on U025, polyethylene on U060) has to be screwed onto a supplied steel nipple which previously has to be welded on the outside of the silo, bin or weigh hopper cone. Subsequently, connection with the compressed air supply has to be carried out.
Their small footprint makes U025 / U060 Aerator Nozzles particularly suitable for retrofitting.
U025 Aerator Nozzles are used with fine powdery materials, such as cement, lime and similar powders, at an operating pressure of 0.2 bar (3 PSI), while U060 Aerator Nozzles work at a pressure of 1 bar (14 PSI).
For food-grade applications choose the VB Vibro-Aerator-Series.
Appropriate arrangements have to be made to exhaust excess air containing entrained dust at the top of the bin/silo.
Benefits
PICJET PJ Combined Hammer Blasters
PICJET PJ Combined Hammer Blasters perform a double action on the bulk material , or :
1) Shockwave generated by single impact of hammer piston
2) High pressure air blast
The PICJET PJ Combined Hammer Blaster is particularly efficient with powders which tend to pack under pressure, as well as with very fine, dry powders. It represents the perfect solution against bridging or rat-holing problems.
Operation is intermittent at a pressure ranging from 3 to 6 bar (44 87 PSI).
Its robust design makes the PICJET PJ Combined Hammer Blaster suitable both indoor outdoor installation. External body parts are manufactured from galvanized steel POM.
PICJET PJ Combined Hammer Blasters are supplied with a mounting plate which has to be welded on the , or wall. A safety chain prevents accidental dropping during installation or maintenance.
PICJET PJ Combined Hammer Blasters come in three different sizes.
Accessories
Benefits
With S-series Ball Vibrators vibration is generated by the movement of a ball inside an eccentric guide. S-series vibrators generate low amplitude high frequency vibration. They are particularly efficient with fine powders granular materials such as sand or seeds. They are also suitable compacting applications in consolidation.
Manufactured from a blue aluminium body with a galvanized steel cover, the S-series is available in eight different sizes.
Working pressure ranges from 2 to 6 bar (29 87 PSI) of oiled air.
Compliant with ATEX EX II 2DG cT(x), the S-series is suitable application in explosive environments. Operating noise reaches 90 dB(A).
Among pneumatic rotary vibrators the S-series is the most economical solution.
Benefits
With OT-series Rotary Turbine Vibrators vibration is generated by a turbine fitted with eccentric weights.
The OT-type generates very low amplitude high frequency vibration. Higher speed than with ball-type roller-type rotary vibrators makes the OT a high performance equipment.
Due to its -free classification the OT-type is suitable lines, compacting , formwork , as well as aiding material flow in chutes. The force generated is higher than that of the ball-type, whereas operating noise is lower.
OT-series Turbine Vibrators, which are manufactured from a silver-grey aluminium casing with a black cover, are available in twelve different sizes.
Compliant with ATEX EX II 2DG cT(x), the OT-series is suitable for explosive environments. Operation is silent -free at working pressure ranging from 2 to 6 bar (29 87 PSI) working temperature up to 120 C (250 F).
Benefits
With OR-series Roller Vibrators vibration is generated by the movement of rollers inside an eccentric guide. OR generate low amplitude and high frequency vibration. Among others, they are suitable for concrete compacting tables, foundry moulds and hopper emptying due to higher force generated than by ball-type S-series vibrators.
The OR-series, which comes with a black aluminium casing and brass cover, is available in four different sizes.
Operating with oiled air at 2 to 6 bar (29 87 PSI), the OR-series is suitable for application in explosive environments (ATEX EX II 2DG cT(x)). Operating noise reaches 90 dB(A).
Benefits
The MVO850 Hydraulic Rotary Vibrator generates very low amplitude high frequency vibration.
MVO850 is suitable installation where a hydraulic circuit is available. Common applications are vehicles such as dump trucks, side dump trailers any other equipment including a , as well as equipment the industry.
The MVO850 shows a robust compact design. It is manufactured from a grey cast iron body equipped with high quality bearings.
The body comes with primer powder coating in orange colour (RAL 2009), ready being painted to the customers requirements without prior shot-blasting. The MVO850 is suitable outdoor installation.
Force speed are adjustable according to working pressure. The force generated may reach 830 kg (1, 830 lbs), while working pressure ranges between 70 120 bar (1, 015 1, 740 PSI).
Benefits
MARTSHOCK PS Single Impact Pneumatic Hammers produce a shockwave generated by a single impact of an internal piston on the metallic base welded on the , or wall. This action is particularly efficient if the powder at issue tends to pack under pressure or stick to the or wall. Moreover, MARTSHOCK PS is an efficient solution against bridging or rat-holing problems.
MARTSHOCK PS Single Impact Pneumatic Hammers are particularly suitable retrofitting existing cones or hoppers since of the or drilling of the wall is not required.
Operation should be intermittent at a pressure ranging from 3 to 6 bar (44 87 PSI).
When operating multiple hammers, those at the bottom should be activated first, moving progressively upwards at regular intervals to the remaining ones.
MARTSHOCK PS robust design is suitable both outdoor indoor application. External body parts are manufactured from galvanized steel POM.
MARTSHOCK PS are supplied with a mounting plate, which has to be welded on the or wall, as well as a safety chain preventing accidental dropping during installation or maintenance.
To satisfy all market demands MARTSHOCK PS is available in three different sizes.
Accessories
Benefits
In Cushioned Pneumatic Linear K-series Vibrators linear vibration is generated by the movement of an internal floating piston rather than the impact between surfaces, which is why these vibrators are also called Cushioned Piston Vibrators.
They are particularly efficient with bulk materials that tend to stick to the wall, with hygroscopic materials, those having coarse particle size electrostatics powders such as or powders which tend to granulate. Cushioned Piston Vibrators are an effective solution against bridging rat-holing phenomena in indoor applications where low noise of maximum 80 dB(A) clean design are normally requested.
In compliance with ATEX EX II 2DG cT(x), Cushioned Piston Vibrators are suitable in explosive environments.
The K-Series is available in four sizes. All models are manufactured from anodized aluminium.
Installation or retrofitting is particularly easy. K-Series vibrators operate at pressure ranging from 2 to 6 bar (29 87 PSI).
Accessories
Safety Chain
Benefits
100 Aerator Pads are a low-cost solution which ensures trouble-free material flow from silos, bins or hoppers with a variety of powdery materials. They can be easily mounted and retrofitted in existing plants.
Due to the semi-convex shape of the durable polymer pad, air is given off with a wide emission angle across the entire white filter surface.
Low pressure aeration or fluidisation prevents rat-holing, bridging, segregation or material residues at the bottom of the silo cone.
I100 Aerator Pads excel through a lightweight, yet robust and reliable engineering polymer casing and filter design. In a single row installation, they are widely used for materials such as cement and similar materials. More sophisticated applications with alternately fed multiple rows can be used for lime storage and dosing plants in which fluidisation is used not only during discharging of the silo but also to keep the material in motion during extended periods of storage.
A rectangular, external mounting kit is available for easily fitting or retrofitting batching plants.
Operating pressure amounts to 0.2 bar (3 PSI).
Appropriate arrangements have to be made to exhaust excess air containing entrained dust at the top of the bin/silo.
For food-grade application choose VB-series (Vibro-Aerators).
Accessories
Rectangular external mounting kit
Benefits
GUNJET PG Air Cannons (blasters) are successfully used where bridging or rat-holing occurs.
They are ideal for setting in motion irregularly shaped, dry and light bulk solids (e.g. fibres, shavings, flakes, wood chippings, plastic chippings).
GUNJET PG Air Cannons are designed to inject blasts of high pressure gas at up to 6 bar (87 PSI), for a short duration (typically fractions of a second) resulting in bridging or rat-holing material to collapse.
In the standard version GUNJET PG Air Cannons are electro-pneumatically activated. A fully pneumatic version is available on request.
When operating multiple air cannons, those at the bottom should be fired first, moving on progressively upwards at regular intervals.
The curved outlet pipe conveys air tangentially along the wall of the bin or silo.
Its robust design makes the GUNJET PG Air Cannon suitable for both indoor and outdoor installation. The external parts of the body are manufactured from galvanized steel and aluminium.
GUNJET PG Air Cannons are supplied with a mounting plate which has to be welded on the bin/hopper/silo wall. A safety chain prevents accidental dropping during installation or maintenance.
GUNJET PG Air Cannons come in three different sizes.
Accessories
Benefits
With F-series Cushioned Pneumatic Vibrators vibration is generated by the movement of an internal floating piston rather than by impact between surfaces. Adjustable forces with weights (not supplied) can be mounted using the threaded bore at the end of the shaft. Cushioned Pneumatic Vibrators are a great alternative to magnetic vibrators for feeder applications. Recommended for coarse particle materials compacting in applications, the F-series is available in different sizes, materials shapes to satisfy a variety of requirements.
Working pressure ranges between 2 6 bar (29 87 PSI) while operating temperature may reach 200 C (392 F).
In compliance with ATEX EX II 2DG cT(x), Cushioned Piston Vibrators are suitable in explosive environments.
Benefits
The unique, patented UNIDIRECTIONAL AIR FLOW Tramontanatechnology is included in the 2014 VB-series. TheVBS Quick Flow(S standing for application on SILOS) has been fully reviewed in order to satisfy current market needs.
Along with a variety of membrane materials, the new design has considerably improved the performance of OLI Vibro-Aerators. An important step ahead in aeration technology, the VB-series meets virtually every users requirements in terms of versatility in use for various powdery materials, protection of the environment and temperature range. Lower operating pressure and reduced air consumption are the main benefits.
An external mounting kit makes the VB-series interchangeable with aerator pads which are commonly used in mobile batching plants.
The Mini-VB series, for both internal and external assembly, completes this product line.
VBT Quick Flow(T standing for trailer application) completes the range as an innovative solution for Bulk Tanker Trailers.
The entire VBT line is food-grade and UL94-compliant. These Aerators are manufactured from high-tech polymer suitable for environmental conditions ranging from extremely hot to extremely cold.
Laboratories and field test have given proof of high efficiency in terms of reduction of tanker unloading time of around 20%, depending on the type of powder.
VBT Quick Flow is completely interchangeable with other aerator makes currently present on the market.
Accessories
Benefits
VHN are Electric High Frequency Internal Vibrators for concrete compaction.
The VHN range is characterised by high centrifugal force, constant speed and high wear resistance which makes it suitable for all types of concrete processing, even in continuous operation.
EWO Electric High Frequency Concrete Vibrators are equipped with a small electronic frequency converter integrated into the power cable, suitable for connection to a single phase mains socket.
This line of vibrators is characterised by high centrifugal force, constant speed and increased wear resistance which makes it suitable even for the most consistent types of concrete and for continuous use.
The shaft is supported by four bearings for extra heavy-duty work requirements.
CM-type Frequency and Voltage Converters are equipped with permanent magnets and are specifically designed to continuously power high frequency concrete vibrators.
A new design, high quality materials and innovative solutions ensure high reliability of this converter range, as well as total absence of maintenance.
SBB-type FIBC Dischargers ensure economic, dust-free discharging of bulk solids from bulk bags.
EASYFILL, a special FIBC Filling Station, can collect simultaneously dust from up to four filters equipped with the unique RECOFIL Recovery System by EXTRAC.
BINSWEEP solves space problems where bulk solids are emptied from bags and transferred to some downstream processing equipment. While bags can be ripped and tipped in a comfortable work position, BINSWEEP ensures accurate, minimum residue discharging of bulk solids.
The DLP Lump Breaker is an efficient, economic machine specially designed for breaking up friable lumps in bulk materials discharged from silos, bins or hoppers.
The Lump Breaking Feeder Valve enables safe and smooth segregation of bulk materials that tend to pack and form lumps during production and/or storage. Its design favours gentle crushing even with hardened material under a medium-high material column.
GT Couplings are designed to join together two plain pipe ends on the same horizontal axis in a safe, quick and rigid way.
EXTRACURVE Pipe Elbows represent the latest evolution in the development of wide angle pipe elbows. Due to their flexibility and adaptability, installation becomes quicker while durability is dramatically increased.
EXTRABEND are innovative, polymer cast short radius Pipe Elbows inserted as a link in pneumatic conveying ducts. Their special geometry enables diversion of the material flow at minimum wear due to a dead zone at the point of diversion.
The ILV device is used for level monitoring in all types of bins or silos and for all kinds of powders or granular materials.
ILS is a highly efficient Continuous Level Measurement System for all kinds of powdery or granular material stored in silos or containers.
The IPM-type Pressure Switch efficiently signals excess pressure inside bins or silos during filling and purging of tankers using a membrane switch. It is also used as a level indicator inside hoppers.
Damage to a silo or its accessories is most likely during filling operation from the tanker due to the risk of overfilling or excess pressurisation.
The KCS system prevents both overfilling and excess pressurisation avoiding damage to silo, venting filter and other accessories. It also reduces the risk of dust emission into the atmosphere.
WASTEMASTER GCP / GCE ensure efficient solids-liquid separation in the primary treatment section of civil waste water treatment plants, as well as in various industrial applications
In a vertical position WASTEMASTER GCV carries out solids-liquid separation with high efficiency in plants with little space available.
