Dubai, United Arab Emirates
Our Product / Services
We offer the best product range of Solid Wood Flooring, engineered hardwood flooring, Parquetry And Marquetry Wood Flooring, Wpc Decking and solid wood decking.
Solid wood flooring is milled from a single piece of timber that is [[kiln]] or air dried before sawing. Depending on the desired look of the floor, the timber can be cut in three ways: flatsawn, quarter-sawn, and rift-sawn. The timber is cut to the desired dimensions and either packed unfinished for a site-finished installation or finished at the factory. The moisture content at time of manufacturing is carefully controlled to ensure the product doesn’t warp during transport and storage. There are a number of proprietary features for solid wood floors that are available. Many solid woods come with grooves cut into the back of the wood that run the length of each plank, often called ‘absorption strips, ’ that are intended to reduce cupping. Solid wood floors are mostly manufactured in 15mm/19mm/20mm/21mm/22mm/25mm thick with a tongue-and-groove for installation. Solid wood these days are seldom site-finished, is always in a plank format, is generally thicker than engineered wood, and is usually installed by nailing or glued down system. These can be installed un-finished and later sanded, stained and finished with lacquer or oil at the site. Most of the Manufacturers produce pre-finished solid wood to cut the hassle of finishing at site and cutting down the time frame for installation. The refinished solid wood will always come with bevel & micro-bevel edges.9
Engineered wood flooring is composed of two or more layers of wood in the form of a plank. The top layer (lamella) is the wood that is visible when the flooring is installed and is adhered to the core. The lamella is the face layer of the wood that is visible when installed. Typically, it is a sawn piece of timber. The timber can be cut in three different styles: flat-sawn, quarter-sawn, and rift-sawn. Keep in mind that each cut will give the board a different final appearance. The increased stability of engineered wood is achieved by running each layer at a 90° angle to the layer above. This stability makes it a universal product that can be installed over all types of subfloors above, below or on grade. Engineered wood is the most common type of wood flooring used globally. There are several different categories of engineered wood flooring: All timber wood floors are made from sawn wood and are the most common category of engineered wood flooring. They do not use rotary peeled veneer, composite wood (such as HDF), or plastic in their construction.wood floors are mostly manufactured in 10mm/11mm/14mm/15mm/19mm/20mm thick with a Click loc system with 2G & 5G technology or t&g for installation. Wood ply construction (“sandwich core”): Uses multiple thin plies of wood adhered together. The wood grain of each ply runs perpendicular to the ply below it. Stability is attained from using thin layers of wood that have little to no reaction to climatic change. The wood is further stabilised due to equal pressure being exerted lengthwise and widthwise from the plies running perpendicular to each other. Finger core construction: Finger core engineered wood floors are made of small pieces of milled timber that run perpendicular to the top layer (lamella) of wood. They can be 2-ply or 3-ply, depending on their intended use. If it is three ply, the third ply is often plywood that runs parallel to the lamella. Stability is gained through the grains running perpendicular to each other, and the expansion and contraction of wood is reduced and relegated to the middle ply, stopping the floor from gapping or cupping. An engineered flooring construction which is popular in parts of Europe is the hardwood lamella, softwood core laid perpendicular to the lamella, and a final backing layer of the same noble wood used for the lamella. Other noble hardwoods are sometimes used for the back layer but must be compatible. This is thought by many to be the most stable of engineered floors. Engineered wood flooring has other benefits beyond dimensional stability and universal use. Patented installation systems allow for faster installation and easy replacement of boards. Engineered wood also allows for a floating installation where the planks are not adhered to the subfloor or to each other, further increasing ease of repair and reducing installation time. Engineered flooring is also suitable for underfloor and radiant heating systems.
Parquetry is a geometric mosaic of wood pieces used for decorative effect. The two main uses of parquetry are as wood veneer patterns on furniture and block patterns for flooring. Parquet patterns are entirely geometrical and angular—squares, triangles, lozenges. The most popular parquet flooring pattern is herringbone or chevron. Parquetry is very similar in technique to marquetry. Parquetry utilizes pieces of veneer in simple repeating geometric shapes to form tiled patterns such as would cover a floor (parquet), or forming basketweave or brickwork patterns, trelliswork and the like. Herringbone floors have rich history as a traditional floor pattern in Europe. It can be installed in several configurations, with or without a border. A popular variation of the herringbone, called Chevron or French herringbone, is prominent in many prestigious European Chateaus. Marquetry is the art and craft of applying pieces of veneer to a structure to form decorative patterns, designs or pictures. The technique may be applied to case furniture or even seat furniture, to decorative small objects with smooth, veneer surfaces or to freestanding pictorial panels appreciated in their own right. The use of curved and natural shapes constitutes marquetry rather than parquetry. Marquetry (and parquetry too) differs from the more ancient craft of inlay, or intarsia, in which a solid body of one material is cut out to receive sections of another to form the surface pattern. The word derives from a Middle French word meaning “inlaid work”.The simplest kind of marquetry uses only two sheets of veneer, which are temporarily glued together and cut with a fine saw, producing two contrasting panels of identical design.Amongst new techniques applied to marquetry we may include laser cutting, where the design is drawn or imported as a CAD or vector file and each piece is cut separately; each different species of wood -and thickness- may need a specific adjustment of the beam’s power; the offset will determine the gap between the pieces and, in some cases, the beam will leave a dark edge due to the very high heat required by the process
Vinyl composition tile (VCT) is a finished flooring material used primarily in commercial and residential applications. Modern vinyl floor tiles and sheet flooring and versions of those products sold since the early 1980s are composed of colored polyvinyl chloride (PVC) chips formed into solid sheets of varying thicknesses by heat and pressure.The tiles are made of a composite of PVC and fibre, producing a thin and fairly hard tile. Polyvinyl chloride (PVC) tiles are a commonly used floor finish made from polyvinyl chloride. Due to the small size of the tiles, usually 150mm, 225mm and 305mm, any damage can soon be repaired by replacing individual tiles.Vinyl flooring is also called “resilient” flooring because it characteristically “bounces back” from the weight of objects that compress its surface. Luxury Vinyl Tile (LVT) LVT is an industry term, not a standard, for vinyl that realistically mimics the appearance of natural materials with an added layer to improve wear and performance. The extra layer of protection is usually a heavy film covered with a UV-cured urethane that makes it scuff, stain and scratch resistant. Modern vinyl floor tile is frequently chosen for high-traffic areas because of its low cost, durability, and ease of maintenance. Vinyl tiles have high resilience to abrasion and impact damage and can be repeatedly refinished with chemical strippers and mechanical buffing equipment. If properly installed, tiles can be easily removed and replaced when damaged. Tiles are available in a variety of colours from several major flooring manufacturers. Some manufacturers have created vinyl tiles that very closely resemble wood, stone, terrazzo, and concrete and literally hundreds of varying patterns. Today’s vinyl floors are made to enhance the aesthetic features of an interior environment. While often mimicking the look of other hard surfaces, they are “warmer” than ceramic tile. Designers can use pattern and colour to make a large room seem smaller or a small room more expansive. And since vinyl is durable, the colour and original appearance will lastn longer with routine maintenance. Vinyl flooring reduces noise and provides comfort underfoot. Unlike such hard surfaces as wood, laminate, terrazzo or ceramic tile, vinyl floors have “give” and thus are referred to as “resilient” flooring.
The deck of a house is generally a wooden platform built above the ground and connected to the main building. It may be enclosed by a railing for safety. Access may be from the house through doors and from the ground via a stairway. Residential decks can be constructed over steep areas or rough ground that is otherwise unusable. Decks can also be covered by a canopy or pergola to control sunlight. Wood or timber “decking” can be used in a number of ways: as part of garden landscaping, to extend living areas of houses, and as an alternative to stone based features such as patios, walkways to the houses, backyards or surrounding swimming pools. Decks are made from treated lumber, composite lumber, composite material. Generally, hardwoods used for decking come from tropical forests. Much of the logging taking place to produce these woods, especially teak, mahogany, merbau, balau, cumaru, tigerwood, massaranduba, ipe, treated pine and many more.
If scratches and damage occur to the surface of a hardwood installation, it may be possible to repair them and restore the like new look of the floor by refinishing it. This involves using an industrial sander to remove the top layer of the material. This is then treated with appropriate stains and urethane coats to achieve the desired effect. Most standard installations will be able to handle multiple refinishing treatments over the life of the product.