ZEAL LUBRICANTS dubai

Zeal ZePace Supreme 0W20 SN.CF Zeal ZePace Supreme 0W20 SN/CF is formulated with fully synthetic base stocks and advanced technology additive system to provide extra high level of engine protection and performance. It is suitable for higher mileage gasoline and diesel powered modern automobiles requiring an API SN/CF specification, where very high viscosity index oils are preferred to provide much longer oil drain intervals & fuel efficiency in modern engines. It provides maximum protection in engines operating under severe conditions, including high-performance turbo-charged, supercharged gasoline and certain diesel multi-valve fuel injected systems. Product Category:  Lubricants Product Sub Category:  Automotive Lubricants Product Sub Sub Category:  Petrol Engine Oils   Zeal ZePace Supreme 0W20 SN/CF is formulated with fully synthetic base stocks and advanced technology additive system to provide extra high level of engine protection and performance. It is suitable for higher mileage gasoline and diesel powered modern automobiles requiring an API SN/CF specification, where very high viscosity index oils are preferred to provide much longer oil drain intervals & fuel efficiency in modern engines. It provides maximum protection in engines operating under severe conditions, including high-performance turbo-charged, supercharged gasoline and certain diesel multi-valve fuel injected systems.   Excellent fuel economy & easy cold starts due to high fluidity at low temperatures. High viscosity index provides excellent resistant oil film, even at high engine operating temperatures. Excellent cleaning agents, reduces sludge and deposit formation which improves engine cleanliness. Outstanding oxidation & thermal stability, reduces oil ageing & helps in extending oil drain intervals. Zeal ZePace Supreme meets or exceeds following International and Builder specifications: API SN, SM, SL, SJ, CF                 BMW Long Life- 01 ACEA A3/B3, A3/B4                 Renault RN 0700/0710 VW 502 00/505 00                  MB 229.3/ 229.5 Porsche A40 Zeal ZePace Supreme series is suitable for use in following: Automotive gasoline, diesel engines and Moderate duty LPG vehicles Passenger cars, SUVs, light trucks and vans. Suitable for all petrol engines with multi-valve & turbo types and with or without catalytic converter. Naturally aspirated or turbo-charged diesel engines in cars and light vans. Fuel injected or indirect injection diesel engines fitted with blow-by recirculation systems.

Zeal ZeTurbo Power 10W30 CJ-4 Zeal Turbo Power 10W-30 CJ-4 is extra high performance diesel engine oil formulated with highly refined base stocks and advanced technology additives to provide reliable engine performance in the latest emission designs, including those with Exhaust Gas Recirculation (EGR) systems and after treatment systems with Diesel Particulate Filters (DPF) and Diesel Oxidation Catalyst (DOC), as well as satisfying the needs of older engines. It may be used in naturally aspirated and turbocharged diesel & petrol engines and On & Off highway applications, providing excellent protection even under the most strenuous conditions. Product Category:  Lubricants Product Sub Category:  Commercial Vehicle Lubricants Product Sub Sub Category:  Diesel Engine Oils     Zeal Turbo Power 10W-30 CJ-4 is extra high performance diesel engine oil formulated with highly refined base stocks and advanced technology additives to provide reliable engine performance in the latest emission designs, including those with Exhaust Gas Recirculation (EGR) systems and after treatment systems with Diesel Particulate Filters (DPF) and Diesel Oxidation Catalyst (DOC), as well as satisfying the needs of older engines. It may be used in naturally aspirated and turbocharged diesel & petrol engines and On & Off highway applications, providing excellent protection even under the most strenuous conditions.   Outstanding oxidation & thermal stability reduces sludge deposits and keeps the engine cleaner. Excellent engine protection by providing outstanding protection against corrosive & abrasive wear Improved shear stability maintains viscosity in-grade under severe, high temperature service conditions. Excellent low temperature pumpability ensures improved fuel economy. Excellent dispersancy provides outstanding soot control in Exhaust Gas Recirculation (EGR) systems. Excellent TBN reserves provide improved acid neutralization and corrosion protection, which helps in extending oil drain interval in both new & old engines using either low (500 ppm) or ultra-low (15 ppm) sulfur diesel fuel. Zeal Turbo Power 10W-30 meets or exceeds following International and Builder specifications: API CJ-4, CI-4 Plus, CI-4, CH-4, CF, CF-2, SM, SL       CAT ECF-3 ACEA E9/E7        MB 228.31 MTU OIL Category 2.1        VOLVO VDS-4 MACK EO-O Premium Plus Detroit Diesel Power Guard 93K218 CUMMINS CES 20081  

Zeal ZeTRANS EP 75W90 GL-5 Zeal Syn Dura Maxx HD 75W90 GL-5 is a high performance heavy duty gear oil, formulated from high quality Synthetic Blend of base oils and an advanced additive system. These lubricants are designed for automotive heavy-duty transmissions, axles and final drives.  Moreover these oils are specially engineered for heavy-duty axles and final drives where extreme pressures and shock loadings are expected.   Product Category:  Lubricants Product Sub Category:  Commercial Vehicle Lubricants Product Sub Sub Category:  Manual Transmission Oils product details Zeal Syn Dura Maxx HD 75W90 GL-5 is a high performance heavy duty gear oil, formulated from high quality Synthetic Blend of base oils and an advanced additive system. These lubricants are designed for automotive heavy-duty transmissions, axles and final drives. Moreover these oils are specially engineered for heavy-duty axles and final drives where extreme pressures and shock loadings are expected.   Exceptional thermal & oxidation stability protects against deposit formation and oil thickening, thus maintains the life and performance of lubricant and transmission. Outstanding anti-wear properties and excellent film strength provides exceptional equipment protection, that not only results in fewer breakdowns but also helps improve transmission efficiency. Excellent rust and corrosion protection for longer component life. Compatibility with seals and gaskets, leads to minimize oil leakage and reduced contamination. Zeal Syn Dura Maxx HD 75W90 GL-5 meets or exceeds following International and Builder specifications: API GL-5/MT-1 (eqv. MIL-L-2105D)            MAN 342 M2 AE J2360            ZF TE ML 05A, 7A, 12E, 16B, C & D, 17B, 19B, 21A Scania STO 1:0            Volvo 1273.10 Zeal Syn Dura Maxx HD 75W90 GL-5 is suitable for use in all Passenger cars, On-highway light and heavy duty trucks, and commercial vehicles. Suitable for Heavy duty manual transmissions, axles and final drives requiring API GL-5 level performance. Applications like Off-highway industries including: construction, mining, quarrying, and agriculture. Other heavy-duty industrial and automotive applications, involving hypoid gears operating under conditions where high speed/shock load, high speed/low torque, and/or low speed/high torque exists.

Zeal ZeTurbo Heavy series Zeal Turbo Heavy series are high performance heavy duty circulating oils formulated with high quality base stocks and advanced additive technology, to provide exceptional equipment protection and reliability in applications lubricated by circulating systems which are operating under moderate to severe conditions. They are specifically designed to demonstrate high resistance to oxidation & thermal degradation, resist sludge formation, excellent demulsibility and high level of protection against wear, rust and corrosion. Product Category:  Lubricants Product Sub Category:  Industrial Lubricants Product Sub Sub Category:  Circulating Oils product details Zeal Turbo Heavy series are high performance heavy duty circulating oils formulated with high quality base stocks and advanced additive technology, to provide exceptional equipment protection and reliability in applications lubricated by circulating systems which are operating under moderate to severe conditions. They are specifically designed to demonstrate high resistance to oxidation & thermal degradation, resist sludge formation, excellent demulsibility and high level of protection against wear, rust and corrosion.   Outstanding thermal & oxidation stability prevents varnish & sludge formation and helps in extending life of oil and filter. Excellent water separability reduces sludge build up and improves efficiency of timing valves. Excellent load carrying properties reduces wear in pumps, bearings and gears. Excellent protection from rust and corrosion of multi-metallurgy compressor components. Zeal Turbo Heavy series are suitable for use in systems where extreme pressure (EP) oils are not required and which are not subjected to shock loads. Primarily designed for applications using splash, bath and ring oil lubrication system Suitable for use in medium to high severity hydraulic systems, requiring higher viscosities. Vacuum pumps and compressors handling air, inert gas and natural gas, upto maximum compressed air temperature of 150 °C. Suitable for lubricating plain bearings, roller bearings, parallel shaft spur, helical & herringbone gears and bevel gears operating under moderate to severe conditions Zeal Turbo Heavy series meets or exceeds following International and Builder specifications: FAG/ SKF (PM oils for Dry section) Morgan Bearings: DIN 51517-2 (CL specs)  

Zeal Trans ATF TYPE A Zeal Trans ATF TYPE A Product Category:  Lubricants Product Sub Category:  Automotive Lubricants Product Sub Sub Category:  Automatic Transmission Oils product details 1.Product Use: AUTOMATIC TRANSMISSION OIL 2.Synonyms: ECOLUBE ATF TYPE A 3.Company Identification ZEAL INT LUBRICANTS IND L.L.C PO Box: 47480, Behind Khansaheb Building, Sharjah, UAE. 4.HAZARDS IDENTIFICATION Emergency and Hazards Overview CAUTION: Contains Petroleum Lubricant. Repeated skin contact can cause skin disorders. ATTENTION: Used motor oil is a possible skin cancer hazard based on animal data. Repeated exposure to oil mist in excess of the OSHA limit (5mg/m3) can result in accumulation of oil droplets in pulmonary tissue. NFPA Ratings: Health 1 Flammability 1 Reactivity 0 Primary Route of Exposure: Skin X Inhalation -- Eye X Health Effect Information Eye Contact: This product is practically non-irritating to the eyes upon direct contact. Based on testing of similar products and/or components. Skin Contact: Avoid skin contact. This product is minimally irritating to the skin upon direct contact. Based on testing of similar products and/or components. Prolonged or repeated contact may result in contact dermatitis which is characterized by dryness, chapping, and reddening. Prolonged or repeated contact may result in oil acne which is characterized by blackheads with possible secondary infection. Avoid prolonged and repeated skin contact with used motor oils. See Section 11 - Toxicological Information. Inhalation: This product has a low vapor pressure and is not expected to present an inhalation hazard at ambient conditions. Caution should be taken to prevent aerosolization or misting of this product. On rare occasions, prolonged and repeated exposure to oil mist poses a risk of pulmonary disease such as chronic lung inflammation. Signs of respiratory effects vary with concentration and length of exposure and include nasal discharge, sore throat, coughing, bronchitis, pulmonary edema and difficulty breathing. Shortness of breath and cough are the most common symptoms. Ingestion: Do not ingest. This product is relatively non-toxic by ingestion. This product has laxative properties and may result in abdominal cramps and diarrhea. Exposure to a large single dose, or repeated smaller doses, may lead to lung aspiration, which can lead to lipid pneumonia or chronic lung inflammation. These are low-grade, chronic localized tissue reactions. Medical Conditions Aggravated by Exposure: Drying and chapping may make the skin more susceptible to other irritants, sensitizers and disease. Other: No information available 5. FIRST AID INFORMATION Eye Contact: Immediately flush eyes with large amounts of water and continue flushing until irritation subsides. If material is hot, treat for thermal burns and seek immediate medical attention. Skin Contact: No treatment is necessary under ordinary circumstances. Remove contaminated clothing. Wash contaminated area thoroughly with soap and water. If material is hot, submerge injured area in cold water. If victim is severely burned, remove to a hospital immediately. Inhalation: This material has a low vapor pressure and is not expected to present an inhalation exposure at ambient conditions. If vapor or mist is generated when the material is heated, and the victim experiences signs of respiratory tract irritation, remove to fresh air. Ingestion: No treatment is necessary under ordinary circumstances. Do not induce vomiting. If victim exhibits signs of lung aspiration such as coughing or choking, seek immediate medical assistance. Notes to Physician: No information available Other: No information available 6. FIRE AND EXPLOSION INFORMATION Flammable Properties Flash Point: 202ºC (typical) by Test Method: ASTM 92 Flammable Limits in Air Upper Percent: No data available Lower Percent: No data available Auto ignition Temperature: No data available Test Method: No information available NFPA Classification: Class III-B combustible liquid Extinguishing Media: Use dry chemical, foam, or carbon dioxide. Fire Fighting Measures Special Fire Fighting Procedures and Equipment: Water may be ineffective but can be used to cool containers exposed to heat or flame to prevent vapor pressure buildup and possible container rupture. Caution should be exercised when using water or foam as frothing may occur, especially if sprayed into containers of hot, burning liquid. Unusual Fire and Explosion Conditions: Dense smoke may be generated while burning. Carbon monoxide, carbon dioxide, and other oxides may be generated as products of combustion. Hazardous Combustion By-Products: None Other: No information available 7. ACCIDENTAL RELEASE MEASURES Personnel Safeguards: Consult Health Effect Information in Section 3, Personal Protection Information in Section 8, Fire and Explosion Information in Section 5, and Stability and Reactivity Information in Section 10. Regulatory Notifications: Notify appropriate authorities of spill. Containment and Clean up: Contain spill immediately. Do not allow spill to enter sewers or Watercourses. Absorb with appropriate inert material such as sand, clay, etc. Large spills may be Picked up using vacuum pumps, shovels, buckets, or other means and placed in drums or other Suitable containers. Other: No information available 8. HANDLING AND STORAGE INFORMATION Handling: Fire extinguishers should be kept readily available. See NFPA 30 and OSHA 1910.106-Flammable and Combustible Liquids. Storage: Do not transfer to unmarked containers. Store in a closed containers away from heat, sparks, open flame, or oxidizing materials. Empty Container Warnings Drums: Empty drums should be completely drained, properly bunged and promptly returned to a drum reconditioned, or properly disposed. Plastic: Empty container may retain product residues. Other: No information available 9. EXPOSURE CONTROLS / PERSONAL PROTECTION INFORMATION Exposure Limits and Guidelines This product does not contain any components with OSHA or ACGIH exposure limits. Personal Protective Equipment Eye/Face Protection: Eye protection is not required under conditions of normal use. If material is handled such that it could be splashed into eyes, wear plastic face shield or splash-proof safety Goggles. Skin Protection: No skin protection is required for single, short duration exposures. For prolonged or repeated exposures, use impervious clothing (boots, gloves, aprons, etc.) over parts of the body subject to exposure. If handling hot material, use insulated protective clothing (boots, gloves, Aprons, etc.). Launder soiled clothes. Properly dispose of contaminated leather articles including Shoes, which cannot be decontaminated. Respiratory Protection: Respiratory protection is not required under conditions of normal use. If vapor or mist is generated when the material is heated or handled, use an organic vapor respirator with dust and mist filter. All respirators must be NIOSH certified. Do not use compressed oxygen in hydrocarbon atmospheres. Personal Hygiene: Consumption of food and beverage should be avoided in work areas where Hydrocarbons are present. Always wash hands and face with soap and water before eating, Drinking, or smoking. Engineering Controls / Work Practices Ventilation: If vapor or mist is generated when the material is heated or handled, adequate ventilation in accordance with good engineering practice must be provided to maintain concentrations below the specified exposure or flammable limits. Other: The OSHA permissible exposure limit (PEL) and ACGIH threshold limit value (TLV) for oil mist is 5 mg/m3. The ACGIH short-term exposure limit (STEL) for oil mist is 10 mg/m3. 10. PHYSICAL AND CHEMICAL PROPERTIES Appearance: Red Odor: Hydrocarbon - mild Vapor Pressure: No data available Physical state: Liquid Vapor Density (air=1): No data available PH: No data available Percent Volatile by Volume: No data available Boiling Point: No data available Volatile Organic Content: No data available Melting Point: No data available Molecular Weight: No data available Specific Gravity: 0.876 g/cc @ 60ºF / 60ºF Average Carbon Number: No data available Pour Point: Data Not Available, Viscosity @ 100ºF: No data available Viscosity @ 100ºC: 7.6 CST (Typical) Solubility in Water: Negligible in water Octanol / Water Coefficient: Log Kow = No data available 11. STABILITY AND REACTIVITY INFORMATION