United Arab Emirates
Our Products
Jet Fuel Oil is widely used in different aircrafts as it is much more successful than other fuels and known for enhancing the performance. Our Jet Fuel Oil is straw-colored in appearance and available in two types Jet A and Jet A-1. Jet Fuel Oil that we offer is free from impurities and has less sulphur content.
Specifications
|
Astm Ip |
Property |
Results |
|---|---|---|
|
Appearance |
Clear bright, visually free from solid matter and undissolved water at normal ambient temp. |
|
|
D3242 354 |
Total Acidity mg KOH/g |
0.007 |
|
D1319 156 |
Aromatics % vol |
18.2 |
|
336 |
Sulphur % mass |
0.028 |
|
D3277 342 |
Mercaptan Sulphur % mass |
0.0021 |
|
D4952 30 |
Doctor test |
|
|
D86 123 |
Distillation IBP oC |
158 |
|
10% vol. Recoverd oC |
172 |
|
|
50% vol. Recoverd oC |
199 |
|
|
90% vol. Recoverd oC |
240 |
|
|
End Point oC |
256 |
|
|
Residue % Vol |
1 |
|
|
Loss % vol |
1 |
|
|
170 |
Flash Point oC |
47 |
|
D1298 160 |
Density @ 15 oC kg/M3 |
801.6 |
|
D2386 16 |
Freezing Point Minus oC |
50 |
|
D445 71 |
Viscosity @ - 20 oC (MM2/S) cSt |
3.798 |
|
D3338 |
Specific Energy MU / K |
43.29 |
|
D156 |
Saybolt Colour |
27 |
|
D1322 57 |
Smoke Point mm |
23 |
|
D1840 |
Naphthalene % vol |
2.65 |
|
D130 154 |
Corrosion copper (2 h@ 100 oC) |
1b |
|
D3241 323 |
Thermal Stability (Alcor JFTOT) |
(Appendix B) |
|
Control |
Filter Pressure Differntial Mm Hg |
1 |
|
Temp. 260 min |
Tubs Deposit Rating (Visual) |
1 |
|
D1094 289 |
Water Reaction, Interface Rating |
- |
|
540 |
Exiatent Gum (Air Medium) mg/100ml |
1.2 |
|
D5252 423 |
Particulate Contaminant mg/L |
0.23 |
|
Stadis 450 |
Static Dissipator Additive mg/L |
- |
|
D3948 |
Microseparometer, (MSEP) rating |
99 |
|
D2624 274 |
Electrical Conductivity @ 28 oC Ps/m |
|
|
Antioxidant mg/L |
Nil |
|
|
Metal Deactivator Mg/L |
Nil |
|
|
Hydroprocessed fuel % vol |
Nil |
|
|
Synthetic Component % vol |
Nil |
|
|
D5001 |
Lubricity (Bocle) |
Unappliacable |
|
565 |
Particle Count : |
|
|
> 4mm per.ml |
165.5 |
|
|
> 6mm Per.ml |
107.3 |
|
|
> 14mm Per.ml |
13.8 |
|
|
>21 mm Per.ml |
3.1 |
|
|
>25 mm Per. Ml |
1.2 |
|
|
> 30 mm per. Ml. |
0.3 |
Kerosene Oil is a combustible liquid that is blue in color and is widely used in lamps and lanterns for heating and lighting purpose. Kerosene Oil that we offer is free from any sort of impurities and acknowledged for its superior quality. Kerosene Oil is also used as insecticides and for various industrial purposes.
Specifications
|
Property |
Units |
Test Method |
Limit |
Typical Results |
|---|---|---|---|---|
|
Appearance |
Visual |
Clear |
Clear |
|
|
Burning test. Char value bloom on chimney |
Mg/kg |
IP 10 |
Max 20 not darker than grey |
15 |
|
Colour Saybolt |
Astm D 156 |
Min + 25 |
+ 28 |
|
|
Corrosion, copper strip (2 Hrs, at 100oC) |
Astm D 130 |
Max 1 |
1 |
|
|
Density at 15oC |
kg/I |
ASTM D 1298 or ASTM D 4052 |
Min 0.775 Max 0.830 |
0.79 |
|
Distillation 20% vol recovered at final Boiling Point Rsidue Loss |
oC oC Vol % Vol % |
ASTM D 86 |
Max 200 Max 300 Max 2.0 Max 1.5 |
176 255 1.2 0.5 |
|
Doctor Test Or Sulphur ; Mercaptan |
Mass % |
ASTM D 4952 or IP 30 ASTM D 3227 |
Negative
Max 0.003 |
0.0013 |
|
Flash Point, ABEL |
oC |
IP 170 |
Min 38 |
41 |
|
Odour |
Marketable |
Marketable |
||
|
Smoke Point |
Mm |
ASTM D 1322 |
Min 25 |
26 |
|
Sulphur, Total |
Mass % |
ASTM D 1265 or ASTM D 2622 or ASTM D 4294 or ASTM D 4045 or ASTM D 5453 or IP 336 |
Max 0.2 |
0.1 |
Intermediate Fuel Oil or IFO is essentially a blend of gasoil and heavy fuel oil. Our Intermediate Fuel Oil is widely acknowledged for its quality, purity and low sulphur content. There are different types of Intermediate Fuel Oil such as IFO 380, IFO 180, etc. Our Intermediate Fuel Oil has maximum viscosity and appreciated for its combustion efficiency.
Specifications
|
Property |
Unit |
Limit |
Method of test |
|
|
ASTM |
IP |
|||
|
Specific Gravity @ 60oF |
0.998 Max |
D1298 |
160 |
|
|
Flash Point |
oC |
66 Min |
D 93 |
34 |
|
Total Sulphur |
% Wt |
4 Max |
D 1552 Or X-Ray |
|
|
Viscosity @ 50 oC |
CST |
180 Max |
D 445 |
71 |
|
Pour Point |
oC |
24 Max |
D 97 |
15 |
|
Ash |
% Wt |
0.1Max |
D 482 |
4 |
|
Water by distillation |
% Vol. |
0.5 Max |
D 95 |
74 |
|
Calorific Value (Gross) |
K Cal/Kg |
10, 000 Min |
Calculated |
|
|
Carbon residue |
% Wt |
12.0 Max |
D 189 |
13 |
Low Sulphur Fuel Oil that we offer is widely demanded by the clients owing to its purity and excellent performance. Our Low Sulphur Fuel Oil has maximum 0.8 Wt PCT of total sulphur. The flash point of our Low Sulphur Fuel Oil is minimum 68oC. We make available Low Sulphur Fuel Oil in quality packaging.
Specifications
| Properties | Units | Value | Limits |
|---|---|---|---|
|
Specific Gravity At 60 |
Deg F |
0.950 |
Max |
|
Flash Point |
Deg C |
68 |
Min |
|
Total Sulphur |
Wt PCT |
0.8 |
Max |
|
K. Viscosity at 60 Deg C |
CST |
120 |
Max |
|
Pour Point |
Deg C |
45 |
Max |
|
Water By distillation |
Vol PCT |
0.5 |
Max |
|
Vanadium |
PPM |
50 |
Max |
|
Nickle |
PPM |
20 |
Max |
|
Conradson C. Residue |
Wt Pct |
8.0 |
Max |
We are considered as the trusted Importer and Exporter of high quality 380 CST Fuel Oil. Our 380 CST Fuel Oil is appreciated for its purity, less sulphur amount and high calorific value. The density of our 380 CST Fuel Oil is 0.991. Further, we provide 380 CST Fuel Oil in tamper proof packaging and at competitive rates.
180 CST Fuel Oil that we offer is known for its purity, accurate composition and non-toxicity. Our 180 CST Fuel Oil has maximum 4% of sulphur content and its flash point is minimum 66oC. Further, our 180 CST Fuel Oil is acknowledged for its high calorific value. We provide 180 CST Fuel Oil in leak-proof packaging.
Specifications
|
Property |
Unit |
Limit |
Method of test |
|
|
Astm |
IP |
|||
|
Specific Gravity @ 60oF |
|
0.998 Max |
D1298 |
160 |
|
Flash point |
oC |
66 Min |
D 93 |
34 |
|
Total sulphur |
% Wt |
4 Max |
D1552 | |
|
Or X-Ray |
||||
|
Viscosity @ 50oC |
Cst |
180 Max |
D 445 |
71 |
|
Pour point |
oC |
24 Max |
D 97 |
15 |
|
Ash |
% wt |
0.1 Max |
D 482 |
4 |
|
Water by distillation |
% vol. |
0.5 max |
D 95 |
74 |
|
Sediment by extraction |
% wt |
0.1 Max |
D 473 |
3 |
|
Calorific value (Gross) |
K Cal/kg |
10, 000 Min |
Calculated |
|
|
Carbon Residue |
% wt |
12.0 max |
D 189 |
13 |
