Post Buy Requirement
AF
United Arab Emirates
Add Review

Our Products

Lava Pumice Stone

LAVA PUMICE STONE


Al Fatah International is the UAE & Qatar representative of M/s. Yali Trading & Shipping GmbH & Co., Germany who are the Master Agent for Greek Lava Pumice.
LAVA pumice stone is extracted on Yali island, Greece, owned by Lava Mining & Quarrying Co, part of Lafarge Group.
Lava Pumice is a chemically inert porous volcanic mineral created by an undersea volcanic eruption of the Nissiros region10, 000 years ago. It is transported to UAE by sea either in bulk by chartered vessel or in bags by containers. Available invarious grades and sizes of 0-3, 0-8, 2-10, 0-16 & 16-40mm with each grades suitable for different applications.


A material with unlimited applications


Lava Pumice stone is an absolutely natural resource that is converted daily into an industrial quality solution of addedvalue all over the world.It serves a wide range of applications modernising the activities of our daily life like housing, transportation, alimentation, clothing etc.


Usage in Construction:


Lava Pumice stone is suitable for the production of light weight structural elements (light weight pumice blocks), of lightweight concrete, of light weight weight precast elements, of light weight insulations, coatings and floor fillings.


Usage in Geotechnical Projects


It is suitable as a substrate in loose soil and ground water as a sub base for roads and playing fields construction and asa light weight filling material in Port constructions.


Usage in Cultivations


As a natural raw material it is suitable as a substrate of hydroponic cultivations, soil improvement media, ingredient forgreen roofs substrates and soil cover in landscaping.


Other Applications:


It serves a broad range of applications of our daily life since it is used in cement production, in textile stone wash as apolishing material, as a water purification media etc.


Advantages:



  • Natural raw material

  • Totally environmentally friendly

  • Homogeneous quality

  • Low specific weight

  • Homogeneous white colour

  • Thermal insulating and sound proofing properties

  • High mechanical strength.

View Complete Details

Manhole Covers

DUCTILE IRON & CAST IRON MANHOLE COVERS, GRATINGS & JRC COVERS:


Al Fatah Internationalis one of the largest stockiest of Ductile Iron (D.I.) & Cast Iron (C.I.) Manhole Covers & Gratings in UAE. We are the sole agent for FRA brand Manhole Covers & Gratings and the biggest distributor for RBA brand Manhole covers & Gratings in UAE for the past few years. We are also a distributor for Mert Dokum, a Turkish brand access covers & Polymer concrete channel gratings.


From manhole covers, access covers, gully gratings, JRC covers for Etisalat & DU and surface boxes, Al Fatah Internationalhave your needs covered. Our wide range of options will guide you to find the loading best suited to your project. Our manhole covers and gully gratings meet the requirements of the European Standards BS EN 124 & BS 497/76 and provide innovative features designed to make them durable, safe and easy to install. Our manhole covers comes in both solid top and recessed types in single seal & double seal options in various sizes and loading capabilities suited to residential, commercial and industrial building and infrastructure projects.


RBA brand Manhole Covers / Gratings / JRC Covers:


RBA brand Manhole Covers, Gratings & JRC Covers produced by RBA Ferro Industries Pvt. Ltd., Kolkata, India who is the largest & one of the oldest manufacturer & exporter of manhole covers in India. They manufacture both Ductile Iron & Cast Iron manhole covers & gratings with specification complying British & European standards of BS EN 124/94 & BS 497/76. RBA Ferro is an ISO 9001:2008 & ISO 14001:2004 certified manufacturer and a Government of India recognized Star Export House. RBA Ferro Industries exports about 25, 000 Mt of iron castings annually.


Can supply any sizes & grades of manhole covers & gratings such as Class B125, C250, D400, E600 & F900 in Ductile Iron & Grade A, B & C in Cast Iron. RBA brand is internationally recognized and well established brand in the Middle East and approved by all major contractors, engineers, developers, consultants and Government bodies holding major project approvals.


FRA brand Manhole Covers / Gratings / JRC Covers:


FRA brand Manhole Covers, Gratings & JRC Covers produced by Utkal Moulders & RFI Pvt. Ltd., Kolkata, India are some of the biggest manufacturers & exporters of manhole covers in India. They manufacture both Ductile Iron & Cast Iron manhole covers & gratings with specification complying British & European standards of BS EN 124/94 & BS 497/76. ISO 9001:2008 certified manufacturers, they exports about 15, 000 Mt of iron castings annually.


Can supply any sizes & grades of manhole covers & gratings such as Class B125, C250, D400, E600 & F900 in Ductile Iron & Grade A, B & C in Cast Iron. FRA brand is a well established brand in the Middle East and approved by all major contractors, engineers, developers, consultants and Government bodies holding major project approvals.


MERT DOKUM Polymer Concrete Channel Gratings & Access Covers:


Mert Dokum is a high quality casting manufacturer in Turkey since 1990 and is the market leader in production of Ductile Iron access covers & Polymer concrete channel gratings. Their products are used in some of the most prestigious projects in Turkey & other European countries. With annual capacity of 42, 000 MT of Iron castings, this ISO certified company is one of the biggest producers in Turkey. Their polymer concrete channels are used in some of the world class sporting arenas & football stadiums in Turkey and Europe.

View Complete Details

Commercial & Residential Garage Doors

Garage Doors & Rolling Shutters :


Our branded Sectional Garage Doors are one of the most popular and practical choices for style, safety, security and easy to use and versatile garage door system. These sectional garage doors open and close in separated individual panel sections, operating vertically without any swing out from the structural opening and tracking mechanism at all. Because of this operation almost any shape of garage opening can be installed to, i.e. arched, angled corners etc. Sectional garage doors will make full use of the space in front of or behind your garage opening as they all open vertically. Al Fatah represents a number of globally recognized brands including CHI Overhead Doors (USA), COL Shutters (Malaysia), Raptor High Speed Doors (Italy), Guardian Operators (USA).


CHI Overhead Doors Made in USA


C.H.I. Overhead Doors manufactured in USA and was built on the idea that garage doors should be exceptional in quality, craftsmanship, and value. It was true when the first garage door was manufactured in 1981 and is still true today. From the beginning, C.H.I. set out to be a different kind of garage door company. One that not only builds garage doors, but that also celebrates heritage, tradition and values.


As a garage door manufacturer we continue to grow with a dedicated purpose - to provide our customers with the very best in garage doors and service. Striving for success, we continually work to improve our products and manufacturing process one door at a time.

View Complete Details

Glazed Ceramic Coated Roof Tiles

Al Fatahs another important luxurious product is Ceipo Ceramic coated Clay Roof Tiles for the decorative roof. Ceipo Ceramic has been in business for over 40 years, specialized in the production of roof tiles and varnished sun breaks.


Ceipo produces varnished single cooked roof tiles in 220 colors, which are available in both single colored forms or in what we call "smoked" versions, where one color is mixed with another. Furthermore, it is able to offer various types of varnish on request and tailor made for the clients Since 1949. Use Ceipo products and leave a lasting mark in time, a unique and attractive style that meets the imagination of professionals and individuals. And keep your home fresh by reflecting sun rays.

View Complete Details

Terrracotta Facade Panels

As an environment friendly decorative material for external walls, terracotta panel is constantly explored by architectural designers for its aesthetic potential when applied to a building faade. The design effects are achieved not only through various patterns (such as surface, shape, color) of the terracotta panels but also through various installation methods including horizontal, vertical, beveled, split-leveled and overlapped installations.


Conventionally, terracotta panels are horizontally installed according to rainscreen principle in order to prevent rainwater from permeating into the wall. Other installation methods are designed in a way that terracotta panels are often used as a decorative element for the walls to attain special effects of the faade.


Vertical installation is also a relatively conventional method for installing terracotta panels. This installation method can visually extend the faade, improve the smoothness of the vertical lines of a building and deliver a clearer and more impressive outline of the building. Therefore, this installation method is applied to many high rising buildings.


The textured finish of LOPO facade panels formed by natural clay extrusion is a very important design element for modern architecture.


Different customers have different preferences for terracotta panel texture. However, LOPO can very well meet either the needs of natural clay surface preferred by European & American designers or the fine uniform texture advocated by Japanese designers. LOPO has advanced raw material grinding & processing equipments which can realize different fine surface effects according to customers requirements. The grind fineness of LOPO terracotta panel raw material can reach 60 meshes (about 0.25mm)


LOPO terracotta panel comes in 5 kinds of standard textures. Natural, Frosted (Sandblasted), Linear, Grooved (Combed) and Corrugated. Each surface can be glazed in different colors or textures according to customers requirements.

View Complete Details

S.S. Drainage Solutions

Franco :


An exclusive Stainless Steel product since fifteen years in UAE market which are used to maintain hygienic profile in areas such as bathrooms, kitchen etc. in five star hotels, luxurious villas, hospitals etc. Every product is carefully created to the exact standard to meet our customers daily life needs. It is available both in SS 316 & 304 Grades with mirror, matt and brush finishes and having twenty years warrantee for its quality and finishing. An extensive research and testing of Franco products brings you the maximum level of assurance for many years. A quality product from India, Franco brand is approved for various projects including PWD projects. Customized products are also available apart from standard range of products.


Drainage Solutions :



  • Floor drain covers

  • Linier Shower Drain

  • Slotted channel gratings

  • Recessed and solid top manhole covers

  • Access Hatches for roof and walls.

  • Hospital shelves & waste bins.

  • Grease traps.

  • Roof Drains.

View Complete Details

Clay Facing Bricks & Pavers

LOPO Clay Facing Bricks has been used as a primary building material all over the world. It is one of the leading environment friendly cladding materials used in residential and commercial structures.


Made from finest clay and formed by vacuum extrusion and fired by tunnel kiln. It is featured in good color and various textures which never fade and is quite attractive.


In order to meet modern architectural design requirements, LOPO has developed various textures of Clay Bricks which includes Restored texture, Natural Flat, Zephyr texture, Matta texture, Linear texture, Frosted texture, Handmade texture and Special textures. These various textures give a level of design flexibility which cannot be attained with other similar materials. These texture not only motivates the designers source of inspiration but also brings the cultural connotation for your household environment.


These are bricks made from clay and used as both furnishing and load-bearing body of the buildings walls. These bricks are in rectangular (standard) form or irregular (auxiliary) form. They are usually designed with porous structure for the purposes including even-heating during calcinations, lowering the bricks overall weight etc. These bricks are widely used in landscaping, residence, shops, utility & public buildings.


Advantages of Clay Facing Bricks used as Exterior Walls:-



  • Durability
    Clay Facing Bricks are calcined from clay at high temperature so that they are anti-weathering and anti-corrosive. These bricks generally have a water absorption rate of not more than 8% so that they are highly resistant to freeze-thaw cycles.

  • Excellent Thermal Insulation
    Temperature adjustable characteristics specific to clay facing bricks makes the room interior cool at summer and warm at winter.

  • Enhancement of Construction
    EfficiencyThe construction process is very simple because clay facing bricks are installed on the external leaf of the cavity wall with both thermal insulation and decoration being completed at a single step. Meanwhile the construction efficiency can be greatly enhanced because the wall body and furnishings are completed simultaneously.

  • High Safety
    Clay Facing Bricks are calcined from clay at above 1100 degree celcius so that the material itself is non-flammable .

  • Sustainability & Low-maintenance
    Clay Facing Bricks are environment-friendly and can be re-used. They will not fade in atmosphere and will instead be more antiquated over time. Once correctly installed, no maintenance or services are needed.

View Complete Details

PVC Fabricated And GRP

A complete PVC customized fabricated solution for all drainage accessories. With ISO 9001 - 2008 quality certified specialized products to cater the wide range of sophisticated applications as per the customer requirements and approved through all Municipalities like, Dubai, Sharjah, Ras Al Khaima etc.


To meet the requirements of the end users, we have a very qualified professional and technical team with all kinds of latest techonologies for the required customization of any PVC & GRP products

View Complete Details

Roof Rain Water Outlets

A cast Aluminium product in Franco brand which is used to allow water to drain out and act against clogging of water on the roof during rainy seasons. It comes in two different types such as Parapet and Dome type. The design is as per standard specifications so that it can be used in all types of buildings and villa projects. It comprises of a Main body with powder coated Cast Aluminium and a removable gravel guard Aluminium grill fixed with Stainless steel 316 bolts & nuts. Franco brand Rain water outlets are approved by all major consultants and clients in UAE including PWD and is in the market since 1998.

View Complete Details

PVC Channels

It became very much necessary to have a solution to maintain a profile to the landscaping structure and to keep the well looking of the ground channel water flow system we introduced world class PVC product in to the market in the name First Plast, Italian make, which was founded in 1966, has been the first company in the group: its name is an acronym for " Fabbrica Italiana Resine Sintetiche e Trafilate" meaning .


"Italian Factory for Synthetic and Extruded Resins." The firm is skilled in manufacturing building plastics and produces in modern plants in Altare (SV) drainage systemssuch as drainage channels, ground accessories, rainwater gutter and solvent cement fittings made of PVC.


First Plast product development is definitely focused on quality and environmental respect, being the company ISO 9001 certified for itsquality management system and ISO 14001 for environmental management in its activities. An internal laboratory performs daily controlof production quality using the most advanced instruments for the testing of plastics, in order to verify that they correspond to European standards of reference.

View Complete Details

Edil Stone

The pleasure of the stone.


In the full ecological respect of the environment.


Stones, cobblestones and briks on sight have always characterized our houses, the desire to safeguard our envoronment with sheathing and pavingstones increase nowadaysin respect of the nature, oxide pigments colouring have a higher length of time than natural stone colouring. Its have been potentioned in processing against worning out by acid rain and sun infra-red rays. Extra pigments, due by manual distribution, vanish after laying materials. It may exist many different stone models depending on shapes and sizes.


One of reconstructed Italian stones quality is that every who take a great interest in bricologa can laying by himself without depend onskilled manpower.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Al Fatah (Al Fatah International Trading Llc)
  • Post Box No. 65620 Dubai, United Arab Emirates - 4192, United Arab Emirates
  • Share us via