Our Product / Services
Flange Guards
2 Products availableWaterjet Cutting Service
1 Services availableBlasting Job Works
1 Services availablePipeline Accessories
1 Products availableValves & Valve Fittings
1 Products availableBolts
1 Products availableGaskets
1 Products availableBuilding Hardware
1 Products availableBlinds
1 Products availableWe offer the best product range of Bleed/Drip Ring and Barr Tees.
Stud Bolts/Nuts | Stud Bolt |
Nut | |
Stud Bar |
Stud Bolts | A193 A320 | B7, B7M, B8, B8M L7, L7M | 1/4- 3 1/4- 2 | ||
Nuts | A194 | 2H, 2HM, Gr4, Gr8, Gr8M | 5/8- 3 |
Types Of Valves:
Valve Gate |
Valve Check Piston |
Valve Ball Floating |
Valve Check Swing |
Valve Globe |
Valve Ball Trunnion |
Valve Check Dual Plate |
Valve Check Ball Type |
Valve Check Single Plate |
Valve Butterfly Double Offset/High Perfm |
Valve Butterfly Concentric |
Valve Needle |
Valve Butterfly Triple Offset |
Valve Plug |
Actuators |
PRODUCTMATERIALCONSTRUCTIONNORMSGRADERANGE
Valves | Carbon Steel | Forged | A105N A350 | LF2 | 1/2”- 2” Gate, Globe Check Valves 1/2”- 60”Ball Valves Class 150-2500 |
Valves | Carbon Steel | Cast | A216 A352 | WCB, WCC, WC5, WC6, WC9, WC12(A) LCB, LCC | 2”- 60” Class 150-2500 |
Valves | Stainless Steel | Forged | A182 | F304, F304L, F316, F316L. F321, F347, F5, F9, F11, F12, F22, F91, F92 F51, F53, F55 ALLOY 20, B148 | 1/2”- 2” Gate, Globe Check Valves 1/2”- 60”Ball Valves Class 150 -2500 |
Valves | Stainless Steel | Cast | A351 | CF3, CF3M, CF8, CF8C, CF8M, CD4MCU, CW12MW, Al Bronze | 2”- 60” Class 150 -2500 |
FITTINGS:
Coupling Full
Cap
Coupling Reducing
Bushing
Coupling Half
Concentric Swage Nipple
Elbow
Eccentric Swage Nipple
Reducer Concentric
Elbowlet
Union
Tee Reducing
Tee Equal
Reducer Eccentric
Weldolet
Plug Hex Head
Sockolet
Plug Square Head
Nipple Hex Reducing
Plug Round Head
Nipolet
Nipple Hex
Threadolet
Bend
Flatolet
Bull Plug
Barred Tee Equal
Barred Tee Reducing
Tubing
Nipple Pipe
Welding Boss
Split Tee Reducing
Split Tee Equal
Split Cross Equal
Split Cross Reducing
Cross Equal
Stub End Short Pattern
Street Elbow
Split Elbow
Latrolet
Cross Reducing
Stub End Long Pattern
Bolts
Washers
Jack Screw
Screw
Sweepolet
Pipet
Fasteners
Reducer Insert
Elbow Reducing
Lateral Tee
RANGE:
CONSTRUCTION NORMS GRADE RANGE
Fittings | Carbon Steel | Seamless/Welded | A234 A860 MSS SP75 A420 | WPB WPHY42, WPHY52, WPHY60, WPHY65 WPHY42, WPHY52, WPHY60, WPHY65 WPL6 | 1/2”- 96” |
Fittings | Carbon Steel | Forged | A105N A350 A694 | LF2 F42, F52, F60, F65 | 1/4”- 4” 1/2”- 2” |
Fittings | Alloy Steel | Seamless/Welded Forged | A234 A182 | WP11, WP22, WP5, WP91 F1, F5, F11, F12, F22, F91, F92 | 1/2”- 96” 1/4”- 4” |
Fittings | Stainless Steel | Seamless/Welded Forged | A403 A815 A182 | WP304/304L, WP316/316L UNS S31803, UNS S32750 F304/304L, F316/316L F50, F51, F52, F53, F54, F55 F57, F60, F61 |
Types Of Flanges: |
Flange Socketweld |
Flange Slip-On |
Flange Spectacle |
Flange Weldneck |
Flange Threaded |
Flange Spacer |
Flange Long Weldneck |
Flange Orifice Weldneck |
Flange Spade |
Flange Reducing Slip On |
Flange Lap Joint |
Flange Reducing Threaded |
Nipo Flange |
Weldo Flange |
Flange Reducing Flange Socket Weld |
Flange Reducing Weldneck |
Flange Orifice Slip On |
Flange Orifice Threaded Flange Flange Blind |
Flanges | Carbon Steel | A105N A350 A694 | LF2 F42, F52, F60, F65 | 1/4- 72 | |
Flanges | Carbon Steel | A707 | L3 CL3, L5 CL3 | 12- 48 | |
Flanges | Alloy Steel | A182 | F1, F11, F12, F22, F5, F91, F92 | 1/2- 48 | |
Flanges | Stainless Steel | A182 | F304/304L, F316/316L F50, F51, F52, F53, F54, F55, F57, F60, F61 | 1/2- 60 1/2- 24 |
Gaskets | Spiral Wound Gasket |
Ring Joint Gasket | |
Compressed Naf (cnaf) Gasket | |
Synthetic Fiber Gasket | |
Rubber Gasket | |
Compressed Asbestos Fiber (caf) Gasket | |
Ptfe Gasket | |
Flexible Graphite Gasket | |
Gasket |
Gaskets | Carbon Steel/Stainless Steel with Outer, Inner Ring & Winding | Spiral Wound Gaskets | 1/4- 48 | ||
Gaskets | Compressed Fibre Jointing Material - Neoprene, Epdm, Viton, NBR & Silicon | Non-Asbestos Soft cut Gaskets | 1/4- 48 | ||
Gaskets | Soft Iron, Stainless Steel- 304, 316/316l in R, RX, BX, API 16.20 & API 6A | Ring Joint Gaskets | 1/2- 24 |
Sizes: From 1/4" up to 64". Bigger than 64" can also be made available upon request.
Pressure rating: From #150lbs to #2500lbs
Steel grades: Carbon Steel (A516 Gr 60/65/70), Mild Steel (A36/S275 JR/ A285 Gr C), Stainless Steel (SS304, SS316). NACE Sour Service is available as well.
Flange faces: Facing for these flanges come in flat faced (FF), raised face (RF) and Ring-type-joints (RTJ)
Specifications: ASME B16.48
Dimensional Accordance: API 590 and ASTM 16.48 or custom requirements.
Paint finish: Standard paint for Carbon & Mild Steel flanges are black matt. Any other requirements are also catered to.
Other related products: Spade flanges, Spacers flanges, Paddle blank flanges, Paddle Spacer flanges, Orifice plate flanges & Bleed Ring flanges.
Some of the popular plate brands we use:
Highlights:
Our company is counted among the most trusted Manufacturers and Suppliers of Sewage Nipples in the market. The Sewage Nipples, that we provide, are made from the optimum quality raw materials. These Sewage Nipples are concentric as well as eccentric. These Sewage Nipples are available in various ends and shapes. With us, you can avail high quality Sewage Nipples at the most affordable prices. Highlights
Sizes: From 1/2" up to 64". Bigger than 64" can also be made available upon request.
Pressure rating: From #150lbs to #2500lbs
Steel grades: Carbon Steel (A516 Gr 60/65/70), Mild Steel (A36/S275 JR/ A285 Gr C), Stainless Steel (SS304, SS316). NACE Sour Service is available as well.
Flange faces: Facing for these flanges come in flat faced (FF), raised face (RF) and Ring-type-joints (RTJ)
Specifications: ASME B16.48
Dimensional Accordance: API 590 and ASTM 16.48 or custom requirements.
Paint finish: Standard paint for Carbon & Mild Steel flanges are black matt. Any other requirements are also catered to.
Other related products: Spectacle Blind Flanges, Orifice plate flanges & Bleed Ring flanges.
Some of the popular plate brands we use:
Highlights: