Dubai, United Arab Emirates
Write a Review
Our Products
Cutting Machine
2 Products availableCnc And Lathe Machinery
2 Products availableDrill & Boring Equipments
2 Products availableBoring Services
1 Products availableGrinding Machine
1 Products availableGrinding & Milling Tools & Machinery
1 Products availableWater Well Drilling Equipment
1 Products availableMachines And Equipments
1 Products availablePressing Machine
1 Products availableOur product range contains a wide range of Lock Former and Profile Gas Cutting
Features :Turning machine for making wooden hand rails legs and support systems design. Motorized machine with manual / motorized tool slide
Features :Mech / Hydraulic driven machine with double 4 jaws independent chuck adjustable for main and big-end grinding. Available in various length from 1500 mm to 3500 mm, with coolant pumps & autofeed.
| MODEL | CRG 48 | CRG 60 | CRG 84 | CRG 90 | CRG 120 |
| Max distance between center | 1200 | 1500 | 2000 | 2250 | 3000 |
| Max distance between chucks | 1150 | 1450 | 2050 | 2235 | 2950 |
| Swing over table | 492 | 492 | 575 | 711 | 775 |
| Max weight of shaft | 60 kg | 120 kg | 210 kg | 340 kg | 1000 kg |
| Height from floor to spindle centre | 1125 | 1125 | 1125 | 1220 | 1220 |
| Work head spindle | 30-45-68 | 27-41-61 | 27-42-65 | 27-41-61 | 22-35-50-60 |
| Max offset of centres | 88 | 115, 112 | 138 | 155 | 165 |
| Grinding wheel speed | 1050 RPM | 900 RPM | 800 RPM | 800 RPM | 600 RPM |
| Table travel rapid | 22 | 22 | 22 | 22 | 22 |
| Table travel slow | 0.75 | 0.75 | 0.75 | 0.75 | 0.75 |
| Grinding wheel dia x width x center hole | 650 x 22 x 152.4 | 650 x 22 x 203.2 | 750 x 25.4 x 203 | 800 x 25.4 x 203 | 900 x 25.4 x 300 |
| Work head spindle dia. | 62 | 62 | 72 | 72 | 87.5 |
| Tail stock spindle travel | 75 | 75 | 75 | 75 | 75 |
| Wheel head motor | 3 HP | 5 HP | 7.5 HP | 7.5 HP | 10 HP |
| Work head motor | 1 HP | 1 HP | 1 HP | 1 HP | 2 HP |
| Main slide auto motor | 1 HP | 1 HP | 1 HP | 1 HP | 2 HP |
| Grinding wheel auto motor | 1 HP | 1 HP | 1 HP | 1 HP | 2 HP |
| Coolant pump moter | 0.1 Hp | 0.1 HP | 0.1 HP | 0.1 HP | 0.1 HP |
Features: Geared driven auto feed machine available from 1500 mm to 3500 mm with various boring bar and electric motor
| Model | LB 5 | LB 8 |
| Max length of block | 1500 | 2500 |
| Max distance between top of bed to boring bar center | 750 | 815 |
| Min distance between top of bed and boring bar center | 450 | 515 |
| Boring capacity with standard equipments | 32-150 | 52-225 |
| Spindle speed infitely variable | 450 | 450 |
| Drive motor (380 V Three phase) | 3 HP | 3 HP |
| Feed motor (220 V single phase) | 0.25 HP | 0.25 HP |
Features :Segmental cup wheel type surface grinder for cylinder heads/ cylinder block facing complete with clamping mechanism, coolant pump and auto feed.
| Model | SG 4 | SG 5 |
| Max Automatic table traverse | 1300 | 1500 |
| Head vertical traverse | 600 | 700 |
| Max grinding width | 350 | 350 |
| Min / Max distance between table and grinding wheel | 0-600 | 0-600 |
| Distance from column to table center | 350 | 350 |
| Segmental wheel dia | 350 | 350 |
| Grinding spindle rotating speed | 1500 | 1500 |
| Milling spindle rotating speed | 750 | 750 |
| Min / Max table feed speed (steplessly variable), p.m. | 0-3000 mm/min | 0-3000 mm/min |
| Grinding spindle shaft motor | 5 HP | 5 HP |
| Head quick feed motor | 0.5 HP | 1 HP |
| Hydraulic system motor | 0.75 HP | 1 Hp |
| Electric coolant pump motor | 0.12 HP | 0.12 HP |
Features :Adjustable length, adjustable angle of cut, high speed aluminium profile cut-off machine, mechanically/pneumatically driven.
Features :Hydraulic/Mechanical over crank type plate shearing machine available in thickness of 5 mm to 25 mm and lengths of 1500 mm to 3500 mm. Hardened and ground 4 edged blade, frontal supports and back gauge.
| MODEL NO. | Shearing Capacity | No. of Holds Down | Length of Back guage |
Weight |
Length | Width | Height | Motor (kW) HP | |
| Width | Cutting Capacity | ||||||||
| HyS1 | 1600 | 6 | 9 | 600 | 3000 | 2300 | 1500 | 1800 | 7.5 (5.5) |
| HyS2 | 2000 | 6 | 11 | 600 | 3500 | 2700 | 1500 | 1950 | 7.5 (5.5) |
| HyS3 | 2500 | 6 | 13 | 600 | 5000 | 3000 | 1500 | 1950 | 7.5 (5.5) |
| HyS3 | 3000 | 6 | 16 | 600 | 7500 | 3500 | 1600 | 1950 | 10 (7.5) |
| HyS5 | 1600 | 8 | 9 | 600 | 4200 | 2300 | 1600 | 1800 | 10 (5.5) |
| HyS6 | 2000 | 8 | 11 | 600 | 4500 | 2500 | 1600 | 1950 | 15 (11) |
| HyS7 | 2500 | 8 | 13 | 600 | 5500 | 3000 | 1600 | 1950 | 15 (11) |
| HyS8 | 3000 | 8 | 16 | 600 | 6500 | 3500 | 1600 | 1950 | 15 (11) |
| HyS9 | 1600 | 10 | 9 | 600 | 5000 | 2300 | 2050 | 2150 | 10 (7.5) |
| HyS10 | 2000 | 10 | 11 | 600 | 6000 | 2500 | 2050 | 2150 | 20 (15) |
| HyS11 | 2500 | 10 | 13 | 600 | 7500 | 3000 | 2050 | 2150 | 20 (15) |
| HyS12 | 3000 | 10 | 16 | 600 | 9500 | 3500 | 2050 | 2150 | 20 (15) |
| HyS13 | 1600 | 12 | 9 | 600 | 6000 | 2300 | 2050 | 2150 | 10 (7.5) |
| HyS14 | 2000 | 12 | 11 | 600 | 6500 | 2700 | 2200 | 2200 | 20 (15) |
| HyS15 | 2500 | 12 | 13 | 600 | 8000 | 3200 | 2200 | 2200 | 20 (15) |
| HyS16 | 3000 | 12 | 16 | 600 | 12000 | 3950 | 2200 | 2200 | 20 (15) |
| HyS17 | 2500 | 16 | 13 | 600 | 8500 | 3250 | 2200 | 2200 | 25 (18.75) |
| HyS18 | 3000 | 16 | 16 | 600 | 12500 | 4000 | 2200 | 2200 | 25 (18.75) |
Features :NAG seriesall geared head SS & SC precision lathe machine with automatic threading in inches, mm, dp, etc., hardened bed, 4 jaw & 3 jaw chucks, taper turning attachments and all standard accessories
| MODEL | NAG 6 | NAG 8 | NAG 10 | NAG 12 | NAG 10 H | NAG 12 H |
| Height of center | 200 | 300 | 300 | 300 | 375 | 375 |
| Width of bed | 250 | 350 | 350 | 350 | 450 | 450 |
| Admit between center | 1000 | 1500 | 2000 | 2500 | 2000 | 2500 |
| Swing dia in gap | 580 | 800 | 800 | 800 | 1075 | 1075 |
| Swing over bed | 400 | 600 | 600 | 600 | 750 | 750 |
| Hole through spindle | 50 | 60 | 60 | 60 | 80 | 80 |
| Swing over cross slide | 215 | 325 | 325 | 325 | 525 | 525 |
| No. of spindle speed | 8 Speed ranging 28 to 1205 RPM | 8 Speed ranging 45 to 1000 RPM | 8 Speed ranging 32 to 720 RPM | |||
| Gross weight (kgs) | 1450 | 2250 | 2600 | 2900 | 2900 | 3200 |
| Net weight (kgs) | 1150 | 1860 | 2050 | 2300 | 2600 | 2900 |
| Power required | 3HP x 1400 RPM | 5HP x 1400 RPM | 7.5HP x 1440 RPM | |||
Features :Hydraulic multi-cylinder Hot press machine for veneer over wood with multiple cylinders and choice of fitting more than one sheet at one time Available in various sizes from 45 Tons to 120 tons
Features :GUM series universal Milling machine with all geared head, single feed / 3 feed automatic with/without rapid drive with milling vice optional accessories like slotting, rack cutting, vertical attachments, dividing head, rotary table, collet set, etc. also available.
| MODEL | GUM 1100 | GUM 1300 | GUM 1500 |
| Table Size | 1100 x 256 mm | 1300 x 300 mm | 1450 x 350 mm |
| T. Slots number and size | 3-12 | 3-17 | 3-17 |
| Feeds | |||
| Longitudinal | 500 | 625 | 750 |
| Cross | 200 | 250 | 350 |
| Vertical | 400 | 450 | 500 |
| Feeds with/without rapid | 4(12-125) | 4(12-125) | 4(12-125) |
| Cross | 4(12-125) | 4(12-125) | 4(12-125) |
| Verticle | 4(12-125) | 4(12-125) | 4(12-125) |
| Taper of Spindle | ISO-40 | ISO-40 | ISO-40 |
| Spindle Speeds | 45-480 | 45-480 | 45-480 |
| Arbour Dia | 25 | 25 | 25 |
| Spindle Motor | 2 HP 1440 RPM | 3 HP 1440 RPM | 5 HP 1440 RPM |
| Feed Motor | 2 HP 960 RPM | 2 HP 960 RPM | 3 HP 960 RPM |
| Pumps Motor | 0.1 HP | 0.1 HP | 0.1 HP |
| Net Weight | 1480 kgs | 2220 kgs | 2675 kgs |
| Gross Weight | 1680 kgs | 2520 kgs | 3075 kgs |
Features :Cylindrical block boring machine with various spindles for various sizes of bores. Mechanically driven machine with autofeeds for different material of block. Available with compound sliding table, auto feeds, coolant pump and degree table for V-shaped engine blocks
Features :Counter weight type folding machine for sheets 0.3 mm to 2.5 mm thickness and 600 mm to 2500 mm lengths. Various lengths of pressing blade facilitates brake pan folding.
Features :Hydraulic/mechanically driven press brake machine available from 1 mm to 20 mm thickness and lengths from 1220 mm to 4000 mm.
| MODEL NO. | Tonnage MT | Bending Capacity | Clearing Passing | RAM Stroke(mm) |
Weight |
Length | Width | Height | Motor (kW) HP |
| HyPB4 | 80 | 2030 x 5 | 1500 | 150 | 4000 | 2225 | 1550 | 2200 | 5 (3.75) |
| 2540 x 4 | 2030 | 150 | 4500 | 2750 | 1550 | 2200 | 5 (3.75) | ||
| 3150 x 3 | 2540 | 150 | 5000 | 3350 | 1550 | 2200 | 5 (3.75) | ||
| HyPB5 | 100 | 2030 x 6 | 1500 | 150 | 4700 | 2225 | 1600 | 2200 | 10 (7.5) |
| 2540 x 5 | 2030 | 150 | 5200 | 2750 | 1600 | 2200 | 10 (7.5) | ||
| 3150 x 4 | 2540 | 150 | 6000 | 3350 | 1600 | 2200 | 10 (7.5) | ||
| HyPB6 | 140 | 2030 x 8 | 1500 | 150 | 5500 | 2225 | 1800 | 2350 | 15 (11.25) |
| 2540 x 6 | 2030 | 150 | 6200 | 2750 | 1800 | 2350 | 15 (11.25) | ||
| 3150 x 5 | 2540 | 150 | 7200 | 3350 | 1800 | 2350 | 15 (11.25) | ||
| HyPB7 | 160 | 2030 x 10 | 1500 | 150 | 6000 | 2225 | 1850 | 2450 | 20 (15) |
| 2540 x 8 | 2030 | 150 | 7000 | 2750 | 1850 | 2450 | 20 (15) | ||
| 3150 x 6 | 2540 | 150 | 8000 | 3350 | 1850 | 2450 | 20 (15) | ||
| HyPB8 | 200 | 2030 x 12 | 1500 | 200 | 7000 | 2250 | 1900 | 2550 | 20 (15) |
| 2540 x 10 | 2030 | 200 | 8200 | 2800 | 1900 | 2550 | 20 (15) | ||
| 3150 x 8 | 2540 | 200 | 9200 | 3400 | 1900 | 2550 | 20 (15) | ||
| HyPB9 | 250 | 2030 x 14 | 1500 | 200 | 8200 | 2250 | 1950 | 2675 | 25 (18.75) |
| 2540 x 12 | 2030 | 200 | 9500 | 2800 | 1950 | 2675 | 25 (18.75) | ||
| 3150 x 10 | 2540 | 200 | 10500 | 3400 | 1950 | 2675 | 25 (18.75) | ||
| HyPB10 | 300 | 2540 x 16 | 2030 | 200 | 11000 | 2800 | 2000 | 2825 | 25 (18.75) |
| 3150 x 12 | 2540 | 200 | 13000 | 2400 | 2000 | 2825 | 25 (18.75 |
Features :3 roll/ 4 roll machine available in thicknesses 1 mm to 40 mm with lengths of 1000 mm to 4000 mm. Pyramid type/ Pre-bending type machines available in mechanical/ hydraulic drive. Cone rolling/ Section rolling optional.
| Model | Width | Thickness | Top roll | Bottom roll | Main motor HP | Top roll adjustment |
| PR315 | 1500 | 3 | 115 | 100 | 3 | Manual |
| PR320 | 2000 | 3 | 130 | 105 | 3 | Manual |
| PR325 | 2500 | 3 | 150 | 125 | 5 | Manual |
| PR615 | 1500 | 6 | 140 | 115 | 5 | Manual |
| PR620 | 2000 | 6 | 160 | 135 | 5 | Manual |
| PR625 | 2500 | 6 | 175 | 150 | 7.5 | Manual |
| PR630 | 3000 | 6 | 200 | 170 | 10 | Manual |
| PR815 | 1500 | 8 | 160 | 135 | 5 | Manual |
| PR820 | 2000 | 8 | 170 | 145 | 5 | Manual |
| PR825 | 2500 | 8 | 185 | 155 | 7.5 | Manual |
| PR1215 | 1500 | 12 | 185 | 155 | 7.5 | Manual |
| PR1220 | 2000 | 12 | 215 | 170 | 10 | Manual |
| PR1225 | 2500 | 12 | 240 | 180 | 15 | Manual |
| PR1230 | 3000 | 12 | 260 | 225 | 20 | Manual |
| PR2020 | 2000 | 20 | 240 | 195 | 15 | Manual |
| PR2025 | 2500 | 20 | 275 | 215 | 20 | Manual |
| PR2030 | 3000 | 20 | 290 | 250 | 25 | Manual |
| PR2520 | 2000 | 25 | 280 | 230 | 20 | Manual |
| PR2525 | 2500 | 25 | 310 | 260 | 30 | 7.5 HP |
| PR2530 | 3000 | 25 | 330 | 280 | 40 | 7.5 HP |
Features :Single / Double cylinder, reciprocating arm type, hydarulic power hacksaw with 1 fitted blade, with auto cutting auto lifting - auto stop system, adjustable vice and coolant pump providing high quality and accurate cutting
| MODEL | HH 8 | HH 10 | HH 12 | HH 14 | HH 16-H | HH 18-H | HH 24-H |
| Max cutting dia. | 8" | 10" | 12" | 14" | 16" | 18" | 24" |
| Stroke (adjustable) | 5.1/2" | 5.1/2" | 5.1/2" | 5.1/2" | 5.1/2" | 5.1/2" | 5.1/2" |
| Stroke per minute | 100 to 120 | 85 to 100 | 85 to 100 | 75 to 85 | 75 to 85 | 60 to 85 | 60 to 85 |
| Electric Motor required | 2 HP | 2 HP | 2 HP | 2 HP | 3 HP | 3 HP | 5 HP |
| RPM of Motor | 1440 | 1440 | 1440 | 1440 | 1440 | 1440 | 1440 |
| Blade Size | 14" or 16" | 16" or 18" | 18" or 20 " | 20" or 22 " | 22" or 24 " | 24" or 26 " | 30" or 32 " |
| Capacity of round bar | 8" | 10" | 12" | 14" | 16" | 18" | 24" |
| Capacity of square bar | 6" | 8" | 10" | 11" | 13" | 14" | 16" |
| Weight | 300 KG | 500 KG | 600 KG | 700 KG | 800 KG | 1000 KG | 1200 KG |
| Length | 3'-2" | 3'-10" | 4'-2" | 4'-6" | 4'-10" | 4'-10" | 5'-6" |
| Breath | 1'-3" | 2'-3" | 2'-3" | 2'-5" | 2'-5" | 2'-5" | 2'-6" |
| Height | 1'-8" | 3'-6" | 3'-8" | 4'-6" | 5'-0" | 5'-6" | 6'-0" |
Features :Multiple die set mounted step folding machine forming various types of locks on sheets for ducting purposes.
| Motor (Kw) | Capacity (mm) | Motor (Kw) | Capacity (mm) |
| 1.5 | 0.3-1.0 | 2.2 | 0.3-1.0 |
| 1.5 | 0.3-0.5 | 1.5 | 0.5-1.2 |
| 2.2 | 0.7-1.5 | 2.2 | 0.5-1.5 |
| 2.2 | 0.5-1.2 | 2.2 | 0.2-1.2 |
Features :All geared shaping machine having 8 speeds, tool post, shaping vice, central lubrication system with a 3 phase motor.
| MODEL | GS 12 | GS 18 | GS 24 | GS 30 | GS 36 | GS 40 |
| SIZE | 12" | 18" | 24" | 30" | 36" | 40" |
| Max. stroke length | 13 | 19 | 15 | 33 | 39 | 41 |
| Length of RAM | 30 | 40 | 53 | 60 | 66 | 75 |
| RAM baring in column | 20 | 26 | 31 | 37 | 41 | 45 |
| Tool Slide Traverse | 7.5 | 10.5 | 12 | 12.5 | 12.5 | 14 |
| Max distance from table to RAM | 5 | 6 | 8 | 9 | 10 | 11 |
| Min. distance from table to RAM | 14 | 15 | 16 | 18 | 20 | 24 |
| Horizontal traverse of the table | 16 | 20 | 26 | 30 | 32 | 36 |
| Speed | 3 | 3 | 4 | 4 | 4 | 4 |
| Length and width of cross slide | 25 x 10.1/2 | 31 x 11 | 38 x 12 | 43 x 12.1/2 | 48 x 13.1/2 | 51 x 15 |
| Surface of table | 14 x 11 | 18.1/2 x 12 | 25 x 15 | 31 x 16 | 37 x 18 | 40 x 20.1/2 |
| Size of base plate | 40 x 16.1/2 | 50 x 22 | 64 x 23 | 76 x 24 | 82 x 26 | 90 x30 |
| Motor required | 2 | 2 | 3 | 3 | 5 | 5 |
| Net weight approx. kg | 1100 | 1100 | 1900 | 2300 | 2800 | 3500 |
Features :Hand lever operated high speed cut-off machine for various profiles. Machine with various blade sizes and cutting capacities, complete with vice, guide and electricals.
| Description | AC300 | AC350 |
| Motor HP | 2 | 3 |
| Blade Spindle | 32 | 32 |
| Blade disc dia. | 300 | 350 |
Features :Versatile multi function machine suitable to cut flat bars, round and square bars, angles, tees, channels, capable of punching and notching on steel sheets. Hydraulic/mechanical drive.
| MODEL | GK-1 | GK-2 | GK-3 | GK-4 |
| Pressure (ton) | 55 | 75 | 110 | 140 |
| Max. cutting thickness (mm) | 16 | 20 | 25 | 30 |
| Cutting angle degree | 7 | 8 | 8 | 8 |
| Shearing size of one stroke(mm) | 16x250 8x 400 | 20x300 10x480 | 25x330 16x600 | 30x355 20x600 |
| Ram stroke(mm) | 80 | 80 | 80 | 80 |
| Number of stroke(cpmP | 8 | 8 | 6 | 8 |
| Throat thickness(mm) | 300 | 355 | 400 | 600 |
| Punching thickness(mm) | 16 | 20 | 25 | 26 |
| Max Punching diameter (mm) | 25 | 30 | 35 | 38 |
| Power of main motor (km) | 4 | 5.5 | 7.5 | 11 |
| Weight of machine (kg) | 1600 | 2000 | 4800 | 6800 |
Features :Mechanical eccentric press machine with mechanical pedal operated clutch system, with motor & guards
Features :S series all geared slotting machine with compound sliding table fitted with rotary table and 3 jaw self centring chuck. Motorised drive with adjustable stroke
| MODEL | S 200 | S 250 | S 300 |
| Stroke Length | 200 | 250 | 300 |
| Rotary Table | 275 | 340 | 500 |
| Longitudinal Movement | 200 | 280 | 280 |
| Cross Movements | 200 | 280 | 280 |
| Cutting Speed of Ram / Stroke per minute | 26-36 | 26-36 | 26-36 |
| Ram Adjustments | 150 | 225 | 230 |
| Throat Depth | 200 | 350 | 400 |
| H.P. Required | 1H.P. | 2H.P. | 3H.P. |
| Distance from the tool rest to the main column | 325 | 340 | 400 |
| Weight (Approx.) | 700Kg | 1000Kg | 1500Kg |
Features :Bench drill press machine simple type belt driven 4 speed with single/3 phase electric motor and drill chuck.
Features :RDL series radial drilling machine with back geared driven head with 8 speeds, manual feed, box table, drill chuck with arbour and sleeve.
| odel | RDL 32 | RDL 40 |
| Max. drilling dia | 32 | 40 |
| Drilling radius | 750 mm | 750 mm |
| Spindle taper | MT3 | MT4 |
| Main motor | 1 HP | 2 HP |
| Elevating motor | 1 HP | 1 HP |
Features :Versatile in-situ boring machine with various capacities from 55 mm to 134 mm dia of bore with depth upto 350 mm.
| MODEL | 005 | 003 | 001 |
| Boring capacity dia | 66 to 134 mm | 55 to 106 mm | 38 to 70 mm |
| Boring capacity depth | 350 | 275 | 150 |
| Cutting speed R.P.M. | 300 | 300 | 300 |
| Electric motor R.P.M. | 1440 | 1440 | 1440 |
| Electric motor power | 3/4 HP, AC/Single Phase, 220/240 V | 3/4 HP, AC/Single Phase, 220/240 V | 1/2 HP, AC/Single Phase, 220/240 V |
| Net Weight | 68 KG | 54 KG | 45 KG |
Features :Profile gas Oxy Acetylene flame cutting m/c as per required profile . Magnetic profile template chaser, provided with table
Features :Adjustable angle of cut, high speed aluminium profile cut-off machine, with head tilting movement optional.
| Description | ASH300 | ASH350 | ASH400 |
| Motor HP | 3 | 3 | 3 |
| Blade Spindle | 32 | 32 | 32 |
| Blade disc dia. | 300 | 350 | 400 |
Al Gouri Machinery Trading L.L.C. (Al Gouri Machinery Trading L.L.C.)P O Box 25140, Dubai, United Arab Emirates
Share us via
