Our Products
Battery Chargers
2 Products availableBattery Tester
1 Products availableBattery Cell
1 Products availableLead Acid Batteries
1 Products availableInverter Batteries
1 Products availableComputer Monitor
1 Products availableElectrical Panels & Distribution Box
1 Products availableElectronic Components
1 Products availableWe offer the best product range of X CELL POWER PACK - PLT BATTERY WITH BUILT IN CHARGER, BATTLE READY BATTERIES FOR DEFENCE, Fibre Plate Batteries, Opzs Batteries and SILVER START BATTERIES FOR AVIATION.
X Cell Power Pack - PLT battery with built in charger
The Pure Lead-Tin VRLA battery has an unmatched peak power performance due to its thin plate design. This is a sealed maintenance free battery with no topping up required for life.
The Charger
The sophisticated SMPS battery charger with in-built protection ensures optimum charging of the batteries always. The periodic running of the Genset to charge the battery is therefore eliminated.
Superior Features and Benefits
Maintenance Free :No Topping up or Specific Gravity Checks
Ready-to-use :Filled and Factory Charged
Reliability : In-built Charger ensures that Battery is always Fully Charged
Cost Advantage :Low Cost of Ownership over its Long Life Time
X-cell :Integrated Battery + Charger System
Product Range
Power Pack for 15KVA to 1500KVA Gensets
Applications
Battle Ready Batteries for Defence
HBLs Battle Ready batteries employ Pure Lead-Tin, Thin plate technology for high performance. These Valve Regulated Lead Acid, maintenance free batteries are designed using Absorbent Glass Mat (AGM) separators. The use of AGM separators in combination with self-resealing, pressure-regulating valves and a starved electrolyte design enables recombination of gasses generated during normal operation. This eliminates free acid and the need for electrolyte top-up. These batteries are tested for vibration & shocks. Battle Ready batteries are delivered fully charged and are ready for use.
Superior Features
Product Range
Applications
Nickel Cadmium Fibre electrode batteries may be seen as 3rd generation (1980s) technology. Pocket plate is 1st generation (1919's) and Sintered Plate is 2nd generation (1950s). The Fibre Electrode Technology has been provided by DAUG, Germany (research venture of Mercedes Benz & Volkswagen).
The Nickel Fibre matrix used for the fibre plate allows 90% of the electrode volume for holding the active material. The open three dimensional fibre structure also provides good conductivity to ensure excellent electrical performance.
Nickel Cadmium Fibre plate technology uses active material free from graphite and iron. Elimination of these elements ensures that the electrolyte does not get carbonated and reduces water consumption.
The elastic nature of NCFP electrode enables it to absorb greater shock and vibration stresses. This includes volume changes during charge and discharge cycles, hence the battery can give more number of cycles compared to other battery technologies. The NCFP technology is considerably lighter in weight and hence has high energy density.
Fibre Plate batteries are manufactured in 4 series (X, H, M and L) based on their performance capabilities. The X series have very thin plates for ultra high rate discharge performance. The H series have thin plates for excellent high rate discharge performance. The L series have thick plates to provide long duration, low current discharge performance. The M series have an optimized plate thickness which is ideal for medium discharge performance and durations.
The wide range of Nickel Cadmium Fibre Plate batteries are available in tough, fusion-welded polypropylene cell containers and lids. When placed on multi-step battery racks, the electrolyte level in all the cells can be visually monitored to facilitate maintenance. For special requirements, the containers can be offered in flame-retardant polypropylene, structural foam-moulded polypropylene or stainless steel.
The batteries are supplied with all related hardware and racks are offered as an option.
Superior Features:
Cell Type |
Capacity Range (Ah) |
Typical Back-up |
Typical Applications |
Low rateKFL(Single & Block) |
20 to 1500 |
Above 3 Hours |
Fire alarms, Emergency lightning, Telecom,Railway signaling, Switchgear protection, Photovoltaic, Cathodic protection |
Medium rate KFM (Single & Block) |
11 to 1391 |
60 Minutes to 3 Hours |
Switchgear protection, Emergency lighting, Motive power, Train lighting, Instrumentation and process control, UPS, Electric vehicles |
High rateKFH(Single& Block) |
11 to 1026 |
Below 60 minutes |
Generator starting, UPS, Diesel locomotive cranking, Aircraft / Helicopter ground Starting, Electro magnets. |
Ultra high rateKFX (Single & Block) |
11 to 120 |
Below 10 Minutes |
Diesel locomotive cranking, Genset starting, AGV’s |
HBL's flat plate vented lead acid batteries are the ideal energy source for standby applications like Switchgear & Power generation plants that require high reliability and performance. The batteries are engineered to give excellent high rate discharge performance required by UPS applications.
These batteries are designed with proprietary manufacturing techniques, quality components and materials for reduced maintenance along with extended battery life that makes it an ideal power supply for Telecommunications, Utilities and other critical backup operations.
Flat Plate Vented batteries are available in two types :
Lead Selenium Low Antimony Alloy (SF Series)
Lead Calcium Alloy
Superior Features
Product Range
Applications
Batteries can be selected from the above range for a given application. Contact HBL for your battery sizing requirements
Sealed Maintenance Free Lead Acid Aircraft batteries
HBL Power Systems Ltd. is a listed Indian company, in business since 1977, with a focus on engineered products and services. Our initial business strategy was to identify technology gaps in India that the company could fill by 'indigenous efforts'.
Nickel Cadmium aircraft batteries, developed for the Ministry of Defence, were among the first products of the company. Subsequently, Silver Zinc aircraft batteries and Sealed Lead Acid aircraft batteries [SILVER START] were added to extend the range and offer a wider choice for our customers.
Silver Start on-board aircraft batteries employ Pure Lead-Tin, Thin Plate technology for high-performance. These Valve Regulated Lead Acid (VRLA) batteries are designed using Absorbent Glass Mat (AGM) separators that render the batteries spill-proof for aerobatic use. The use of AGM separators in combination with self-resealing, pressureregulating valves and a starved electrolyte design enable recombination of gases generated during normal operation. This eliminates the need for electrolyte top-up.
Silver Start batteries are delivered fully charged and are ready for immediate use. These batteries are a replacement for the Russian 12CAM28 dry charged lead acid battery.
Our success has been built serving some of the world's most demanding customers and we would welcome an opportunity to serve your business too.
High-quality manufacturing
Each step of the manufacturing process is carried out under controlled conditions to ensure quality.
Compliant with aviation, safety, quality & environmental standards
Silver Start (SS28300) is a 24V, 28Ah@5hr battery consisting of two 12V blocks connected together in series. This battery is used for on-board aircraft starting and for providing emergency backup .
The SS28300 battery is available with or without the battery box in various configurations depending on the requirements of the specific helicopter/aircraft:
The SS28300 battery is also suitable (with minor modifications of battery box) for use on
Conformance Standards
Silver Start batteries conform to the MIL 8565J standard and Indian MOD standard.
Features: