United Arab Emirates
Write a Review
Our Products
Electrical Conduit Fitting
2 Products availableNuts Bolts And Fasteners
2 Products availablePlumbing & Pipe Fittings
2 Products availableClamps
2 Products availablePacking Straps, Clips & Accessories
2 Products availableGaskets
1 Products availableOur offered Product range includes U-BOLT DOUBLE PLATE - ROD TO TAPE, BACK OUTLET BOX, Looping Box, Extension Ring and SQUARE COVER.
Driving Heads are made up of high tensile steel. It protects the earth rod while hammering down. Driving Heads are reusable.
Custre Type W Clamps are used to join the Earth Rods and Copper Tapes. The clamps are casted out of copper alloy. The clamps are highly resistant to corrosion & ensure a secure connection.
| 14.2 | 25 x 325 x 630 x 6 |
| 16 | 25 x 325 x 630 x 6 |
| 17.2 | 25 x 325 x 630 x 640 x 350 x 6 |
| 20 | 25 x 325 x 630 x 640 x 350 x 6 |
Elecnice 'U' Type clamps are made of copper alloy and provide high mechanical strength and resistance to corrosion. 'U' Type clamps are used to join Earth Rods with copper tape or conductor.
DC Tape Clips are made of copper alloy. It is used to secure copper tape to the structure. DC clip with its two parts gives a robust connection.
Square Clamps are used as a junction between copper tapes to form a square or tee connection.
| 30305060 | 25 x 325 x 640 x 350 x 6 |
One Hole Clip is made of copper alloy. This is used to secure circular conductor to structure. The clip is fxed to the structure with wood screw
| 507095 | MlO |
Supplied without covers & Screw unless ordered.
| 20 mm | 3/4" |
| 25 mm | 1" |
| 32 mm | 1 1/4" |
| 40 mm | 1 1/2" |
| 50 mm | 2" |
Supplied without covers & Screw unless ordered.
| 20 mm | 3/4" |
| 25 mm | 1" |
| 32 mm | 1 1/4" |
| 40 mm | 1 1/2" |
| 50 mm | 2" |
| 20 mm | 3/4" |
| 25 mm | 1" |
| 32 mm | 1 1/4" |
| 40 mm | 1 1/2" |
| 50 mm | 2" |
| 20 mm | 3/4" |
| 25 mm | 1" |
| 12 mm | 1/2" |
| 15 mm | 5/8" |
| 20 mm | 3/4" |
| 25 mm | 1" |
| 32 mm | 1 1/4" |
| 40 mm | 1 1/2" |
| 50 mm | 2" |
| 20 mm | 3/4" |
Size(mm)
| 65 mm |
| 82 mm |
| 20 mm | 3/4" |
| 25 mm | 1" |
| 32 mm | 1 1/4" |
| 40 mm | 1 1/2" |
| 50 mm | 2" |
| 20 mm | 3/4" |
| 25 mm | 1" |
| 32 mm | 1 1/4" |
| 40 mm | 1 1/2" |
| 50 mm | 2" |
| 20 mm | 3/4" |
| 25 mm | 1" |
| 32 mm | 1 1/4" |
| 40 mm | 1 1/2" |
| 50 mm | 2" |
| 20 mm | 3/4" |
| 25 mm | 1" |
| 32 mm | 1 1/4" |
| 40 mm | 1 1/2" |
| 50 mm | 2" |
| 20 mm | 3/4" |
| 25 mm | 1" |
| 32 mm | 1 1/4" |
| 40 mm | 1 1/2" |
| 50 mm | 2" |
| 20 mm | 3/4" |
| 25 mm | 1" |
| 32 mm | 1 1/4" |
| 40 mm | 1 1/2" |
| 50 mm | 2" |
| 20 mm | 3/4" |
| 25 mm | 1" |
| 32 mm | 1 1/4" |
| 40 mm | 1 1/2" |
| 50 mm | 2" |
| 4" x 4" x 2 1/8" |
| 4" x 2" x 2 1/8" |
| 75 X 75 X 50MM |
| 75 X 75 X 75MM |
| 100 X 100 X 50MM |
| 100 X 100 X 75 MM |
| 100 X 100 X 100 MM |
| 150 X 150 X 75MM |
| 150 X 150 X 100MM |
| 225 X 225 X 75MM |
| 225 X 225 X 100MM |
| 300 X 300 X 75MM |
| 300 X 300 X 75MM |
| 72X72X16 MM |
| 72X72X25 MM |
| 72X72X35 MM |
| 72X72X47 MM |
| 20 mm | 3/4" |
| 25 mm | 1" |
| 32 mm | 1 1/4" |
| 40 mm | 1 1/2" |
| 50 mm | 2" |
| 20 mm | 3/4" |
| 25 mm | 1" |
| 32 mm | 1 1/4" |
| 40 mm | 1 1/2" |
| 50 mm | 2" |
| 20 mm | 3/4" |
| 25 mm | 1" |
| 25mm X 32mm |
| 32mm X 38mm |
| 38mm X 50mm |
| 16mm X 25mm |
| 16mm X 32mm |
| 16mm X 38mm |
| 16mm X 50mm |
| 20mm X 32mm |
| 20mm X 38mm |
| 20mm X 50mm |
| 25mm X 38mm |
| 25mm X 50mm |
| 32mm X 50mm |
| 20 mm | 3/4" |
| 25 mm | 1" |
| 32 mm | 1 1/4" |
| 40 mm | 1 1/2" |
| 50 mm | 2" |
This type of conduit is used where mechanical strength and flexibilities are required.
This type of conduit is extremely versatile and can be used in dynamic as well as static.
| Size | Internal Diameter mm | External Diameter mm | Min Bending Radius mm | Coil Packing Metre | CAT NO. |
|---|---|---|---|---|---|
| 3/8" | 10.5 | 14.5 | 30 | 50 | CPCGF-380 |
| 1/2" | 12.5 | 16.25 | 35 | 50 | CPCGF-120 |
| 5/8" | 16 | 20 | 40 | 50 | CPCGF-580 |
| 3/4" | 19.5 | 23.5 | 48 | 15,30,50 | CPCGF-340 |
| 1" | 25.4 | 29.25 | 55 | 15,30,50 | |
| 1¼" | 32.2 | 36.25 | 65 | 15,20 | |
| 1½" | 40.3 | 46 | 72 | 15,20 | |
| 2" | 51 | 56 | 90 | 10,20 | |
| 2½" | 64 | 69.5 | 135 | 10 | |
| 3" | 76.5 | 81.3 | 145 | 10 | |
| 3½" | 89 | 95 | 152 | 10 | |
| 4" | 101 | 111 | 180 | 10 |
Smooth Inner surface, flexible, twistable in vertical and axial direction, non corrosive, easy to install.
| 16mm | CFCP-16 |
| 20mm | CFCP-20 |
| 25mm | CFCP-25 |
| 32mm | CFCP-32 |
| 40mm | CFCP-40 |
| 50mm | CFCP-50 |
This type of conduit is used where mechanical strength and flexibilities are required.
| Size | Internal Diameter mm |
External Diameter mm |
Min Bending Radius mm |
Coil Packing Metre |
CAT NO. |
|---|---|---|---|---|---|
| 3/8" | 10.2 | 13.5 | 30 | 50 | CGSFC-380 |
| 1/2" | 12.7 | 15.5 | 35 | 50 | CGSFC-120 |
| 5/8" | 16 | 19.5 | 40 | 50 | CGSFC-580 |
| 3/4" | 19 | 22.5 | 48 | 15,30,50 | CGSFC-340 |
| 1" | 25.4 | 28.5 | 55 | 15,30,50 | CGSFC-100 |
| 1¼" | 32.2 | 35.5 | 65 | 15.2 | CGSFC-114 |
| 1½" | 40.3 | 45 | 72 | 15,20 | CGSFC-112 |
| 2" | 51 | 55 | 90 | 10.2 | CGSFC-200 |
| 2½" | 64 | 70.5 | 135 | 10 | CGSFC-212 |
| 3" | 76.5 | 83.3 | 145 | 10 | CGSFC-300 |
| 3½" | 89 | 95 | 152 | 10 | CGSFC-312 |
| 4" | 101 | 109 | 180 | 10 | CGSFC-400 |
| Size | Internal Diameter mm |
External Diameter mm |
Min Bending Radius mm |
Coil Packing Metre |
CAT NO. |
|---|---|---|---|---|---|
| 12 MM | 10 | 13.5 | 30 | 15,30,50 | CGSFC-12 |
| 16 MM | 12.8 | 16 | 35 | 25,30,50 | CGSFC-16 |
| 20 MM | 17 | 20.5 | 42 | 25,30,50 | CGSFC-20 |
| 25 MM | 22.8 | 25.5 | 50 | 25,30,50 | CGSFC-25 |
| 32 MM | 28.8 | 32 | 60 | 15,20,25 | CGSFC-32 |
| 40 MM | 36.5 | 40 | 70 | 15,20,25 | CGSFC-40 |
Brass Flexible Conduit connector is designed in three piece to provide extra protection and used in Galvanized / PVC coated flexible conduit system. This connector fits into inside helix of the conduit and is used to connect the flexible conduit to the equipment, enclosure or other conduit system.
Straight fitting - Fixed external male thread| 16mm |
| 20mm |
| 25mm |
| 32mm |
| 40mm |
| 50mm |
| 1/2" |
| 2" |
| 41 X 21 mm | LC-4121 |
| 41 X 41 mm | LC-4141 |
| Size inches | ID (mm) |
Width (mm) |
Thickness (mm) |
Safe Load (kgs.) |
CAT. NO. |
|---|---|---|---|---|---|
| ½" | 10 | 25 | 3 | 350 | LCH01 |
| ¾" | 10 | 25 | 3 | 350 | LCH02 |
| 1" | 10 | 25 | 3 | 350 | LCH03 |
| 1¼" | 10 | 25 | 3 | 350 | LCH04 |
| 1½" | 10 | 25 | 3 | 350 | LCH05 |
| 2" | 10 | 25 | 3 | 350 | LCH06 |
| 2½" | 16 | 30 | 3 | 390 | LCH07 |
| 3" | 16 | 30 | 4 | 480 | LCH08 |
| 3½" | 16 | 30 | 4 | 570 | LCH09 |
| 4" | 16 | 30 | 4 | 690 | LCH10 |
| 5" | 16 | 40 | 4.5 | 910 | LCH11 |
| 6" | 20 | 40 | 4.5 | 1210 | LCH12 |
| 8" | 24 | 40 | 4.5 | 1850 | LCH13 |
| Size inches | ID (mm) |
Width (mm) |
Thickness (mm) |
Safe Load (kgs.) |
CAT. NO. |
|---|---|---|---|---|---|
| ½" | 10 | 21 | 1.4 | 350 | LBH01 |
| ¾" | 10 | 21 | 1.4 | 350 | LBH02 |
| 1" | 10 | 21 | 1.4 | 350 | LBH03 |
| 1¼" | 10 | 21 | 1.4 | 350 | LBH04 |
| 1½" | 10 | 21 | 1.4 | 350 | LBH05 |
| 2" | 10 | 21 | 1.4 | 350 | LBH06 |
| 2½" | 10 | 30 | 2 | 390 | LBH07 |
| 3" | 10 | 30 | 2 | 480 | LBH08 |
| 3½" | 10 | 30 | 2 | 570 | LBH09 |
| 4" | 10 | 30 | 2 | 690 | LBH10 |
| 5" | 12 | 40 | 2 | 910 | LBH11 |
| 6" | 12 | 40 | 2 | 1210 | LBH12 |
| 8" | 12 | 40 | 2 | 1850 | LBH13 |
| Size | Standard Thread Size "C" | Thread Length "D" |
Cable Dia | Cable Dia | Armour Wire Dia. |
Protrusion Length "F" |
A/F | A/C |
|---|---|---|---|---|---|---|---|---|
| Metric | "A" Max | "B" Max | ||||||
| 20S | 20 | 10.00 | 12.50 | 16.00 | 0.9-1.25 | 15.70 | 24.00 | 26.20 |
| 20 | 20 | 10.00 | 15.00 | 20.00 | 1.25-1.60 | 17.20 | 24.00 | 26.20 |
| 25 | 25 | 10.00 | 20.50 | 27.50 | 1.60-2.00 | 25.20 | 32.00 | 35.00 |
| 32 | 32 | 10.00 | 27.25 | 34.50 | 1.60-2.00 | 21.50 | 40.50 | 45.00 |
| 40 | 40 | 15.00 | 33.30 | 41.50 | 2.0-2.50 | 23.20 | 48.00 | 52.00 |
| 50S | 50 | 15.00 | 38.50 | 47.00 | 2.0-2.50 | 26.80 | 55.00 | 60.00 |
| 50 | 50 | 15.00 | 44.50 | 52.00 | 2.50 | 27.20 | 61.00 | 65.00 |
| 63S | 63 | 15.00 | 51.00 | 59.20 | 2.50 | 27.50 | 70.00 | 75.00 |
| 63 | 63 | 15.00 | 56.80 | 65.50 | 2.50 | 28.50 | 75.00 | 80.00 |
| 75S | 75 | 15.00 | 64.00 | 74.00 | 2.5-3.15 | 29.40 | 85.00 | 90.00 |
| 75 | 75 | 15.00 | 68.20 | 79.50 | 3.15 | 30.00 | 90.00 | 95.00 |
| 82 | 82 | 15.00 | 74.70 | 84.40 | 3.15 | 40.20 | 96.50 | 103.00 |
| 90 | 90 | 15.00 | 82.80 | 91.00 | 3.15 | 40.00 | 109.00 | 118.00 |
| Size | Type | Material | Thread Type | Shroud Type | Accessories |
|---|---|---|---|---|---|
| 20S | BW2P | Brass-1 | Standard Metric-11 | PVC Shroud-PS | Steel Lock Nut-5 |
| Nickle Plated-3 | Dip Moulding Shroud-DS | IP Washer-6 | |||
| LSF Shroud-LS |
| Gland Size | Dia. over metal sheath of Cable |
Dimension in mm | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | B | ∅C | ∅D | E | F | G | H | ∅J | R | ||
| X | 12 to 51 | 137 | 90 | 60 | 19 | 90 | 90 | 66 | 66 | 12 | 12 |
| Y | 25 to 78 | 155 | 95 | 108 | 32 | 114 | 123 | 95 | 86 | 14 | 14 |
| Y | 25 to 78 | 150 | 95 | 106 | 28 | 137 | 137 | 104 | 104 | 14 | 14 |
| Z | 25 to 94 | 125 | 140 | 108 | 32 | 190 | 100 | - | - | 44 | - |
| Size | Type | Material | Clamp | Gasket |
|---|---|---|---|---|
| X | Wiping | Brass-1 | Hot Dip Galvanized-A | Neoprene Gasket-B |
| Trade Size | Metric Designator | Outside Diameter | Thickness A | Thickness B | Length | ||||
|---|---|---|---|---|---|---|---|---|---|
| Min | Max | Inch | mm | Inch | mm | feet | mtr. | ||
| 1/2" | 16 | 0.706 | 17.93 | 0.042 | 1.07 | 0.033 | 0.85 | 10 | 3.05 |
| 3/4" | 21 | 0.922 | 23.42 | 0.049 | 1.25 | 0.039 | 1.00 | 10 | 3.05 |
| 1" | 27 | 1.163 | 29.54 | 0.057 | 1.45 | 0.043 | 1.10 | 10 | 3.05 |
| 1 1/4" | 35 | 1.510 | 39.35 | 0.065 | 1.65 | 0.051 | 1.30 | 10 | 3.05 |
| 1 1/2" | 41 | 1.740 | 44.20 | 0.065 | 1.65 | 0.051 | 1.30 | 10 | 3.05 |
| 2" | 53 | 2.197 | 55.80 | 0.065 | 1.65 | 0.055 | 1.40 | 10 | 3.05 |
| 2 1/2" | 63 | 2.875 | 73.03 | 0.072 | 1.83 | - | - | 10 | 3.05 |
| 3" | 78 | 3.500 | 88.90 | 0.072 | 1.83 | - | - | 10 | 3.05 |
| 4" | 103 | 4.500 | 114.30 | 0.083 | 2.11 | - | - | 10 | 3.05 |
| SIZE | Radius (inch) | Offset (inch) |
|---|---|---|
| 1/2" | 4.000 | 6.250 |
| 3/4" | 4.500 | 7.000 |
| 1" | 5.750 | 9.250 |
| 1 1/4" | 7.250 | 10.500 |
| 1 1/2" | 8.250 | 12.500 |
| 2" | 9.500 | 14.250 |
| 2 1/2" | 10.500 | 19.000 |
| 3" | 13.000 | 20.000 |
| 4" | 16.000 | 26.000 |
| SIZE | DIM A (inch) | DIM B (inch) |
|---|---|---|
| 1/2" | 1.125 | 0.722 |
| 3/4" | 1.405 | 0.945 |
| 1" | 1.594 | 1.181 |
| 1 1/4" | 1.907 | 1.535 |
| 1 1/2" | 1.535 | 1.772 |
| 2" | 2.786 | 2.217 |
| 2 1/2" | 3.125 | 2.913 |
| 3" | 3.346 | 3.563 |
| 4" | 3.740 | 4.488 |
| SIZE | DIM A (inch) | DIM B (inch) |
|---|---|---|
| 1/2" | 1.268 | 0.724 |
| 3/4" | 1.343 | 0.945 |
| 1" | 1.463 | 1.181 |
| 1 1/4" | 1.795 | 1.527 |
| 1 1/2" | 1.894 | 1.756 |
| 2" | 2.063 | 2.217 |
| SIZE | DIM A (inch) | DIM B (inch) |
|---|---|---|
| 1/2" | 1.748 | 0.722 |
| 3/4" | 1.800 | 0.961 |
| 1" | 2.000 | 1.185 |
| 1 1/4" | 2.760 | 1.541 |
| 1 1/2" | 3.000 | 1.785 |
| 2" | 3.190 | 2.217 |
| 2 1/2" | 3.878 | 2.818 |
| 3" | 4.375 | 3.550 |
| 4" | 4.745 | 4.550 |
| SIZE | DIM A (inch) | DIM B (inch) |
|---|---|---|
| 1/2" | 1.788 | 0.565 |
| 3/4" | 1.950 | 0.622 |
| 1" | 2.245 | 0.750 |
| 1 1/4" | 2.852 | 0.882 |
| 1 1/2" | 3.158 | 1.000 |
| 2" | 3.928 | 1.100 |
| 2 1/2" | 5.000 | 1.300 |
| 3" | 5.551 | 1.300 |
| 4" | 6.860 | 1.300 |
| SIZE | DIM A (inch) | DIM B (inch) |
|---|---|---|
| 1/2" | 1.051 | 0.788 |
| 3/4" | 1.325 | 0.984 |
| 1" | 1.585 | 1.260 |
| 1 1/4" | 1.950 | 1.594 |
| 1 1/2" | 2.200 | 1.831 |
| 2" | 2.695 | 2.323 |
| 2 1/2" | 3.235 | 2.776 |
| 3" | 3.885 | 3.465 |
| 3 1/2" | 4.360 | 3.895 |
| 4" | 5.010 | 4.448 |
| SIZE | DIM A (inch) | DIM B (inch) |
|---|---|---|
| 1/2" | 1.051 | 0.788 |
| 3/4" | 1.325 | 0.984 |
| 1" | 1.585 | 1.260 |
| 1 1/4" | 1.950 | 1.594 |
| 1 1/2" | 2.200 | 1.831 |
| 2" | 2.695 | 2.323 |
| 2 1/2" | 3.235 | 2.776 |
| 3" | 3.885 | 3.465 |
| 3 1/2" | 4.360 | 3.895 |
| 4" | 5.010 | 4.448 |
Naveen Goyal (Al Adab General Trading LLC)Shop No.31 Al Zarooni BuildingrnNasser Square Deira - 40645, United Arab Emirates
Share us via
