dubai, United Arab Emirates
Our Products
An excellent helping tool, enables users to address detectors softly rather than using a dip-switch. Also includes more features - consult manual.
Zeta GSM communicator is an interface that allows a fire alarm panel to send a SMS text message in the event of an alarm or a fault.
Quatro Panels Premier Quatro 4 Loop Analogue Addressable Fire Alarm Panel
The Quatro control panel is designed, manufactured and tested to fully meet the requirements of EN54 part 2 and part 4.
This panel is of a modular nature and can be supplied in 1, 2, 3, and 4 loop versions.
A specially designed Quatro Configuration software is available for configuring the panel or multi-panels and can be downloaded to the system via USB connection.
Up to 32 panels/repeaters can be networked over 10, 000m of data cable and a special alarm management system can provide all needs for very large projects such as university campus, hospital complex etc.
The Quatro 4 loop enclosure is available with two optional flush mounting bezels; first the QT4-FMB bezel which matches the same finish as the standard panel or secondly the QT4-FMB/SS which replaces the entire front with a stainless steel finish.
| Model Number | Description | |
|---|---|---|
| QT/1 | Premier Quatro 1 Loop Fire Alarm Panel | |
| QT/2 | Premier Quatro 2 Loop Fire Alarm Panel | |
| QT/3 | Premier Quatro 3 Loop Fire Alarm Panel | |
| QT/4 | Premier Quatro 4 Loop Fire Alarm Panel |
The ZT-CP3/AD is the latest addressable call point from Zeta Alarm Systems. It has a modern design, and has been built to EN54 part 11.
| Model Number | Description | Datasheets & Manuals |
|---|---|---|
| ZT-CP3/AD | Zeta Addressable CP3 Manual Call Point CPD Number: 0832-CPD-2099 |
Datasheet Manual |
| ZT-CP3/AD/W | Zeta Addressable Surface Mount Manual Call Point White | Datasheet |
| CP3-FMB | Zeta CP3 Call Point Flush Mount Bezel | Datasheet |
| CP3-FMB/W | Zeta CP3 Call Point Flush Mount Bezel White | Datasheet |
| CP3-CV | Zeta CP3 Call Point Protective Cover | Datasheet |
| CP3-KEY | Zeta CP3 Call Reset Key | Datasheet |
| ZT-CP3/AD/ WP | Zeta Addressable Weatherproof Manual Call Point (Surface Mount Only) | Datasheet |
The Fyreye II Sandwich sounder base is a platform sounder that works with the Zeta Fyreye II protocol. The sounder can be triggered from it`s detectors remote LED output, allowing the sounders to be triggered individually. It can also be triggered using the Protocol`s common sounder group command, meaning that it can be triggered even if it`s detector has been removed.
The Xtratone sounders are small, high output addressable devices which are designed to meet EN54 part 3.
The device is a compact unit that fits a standard European back box and can be either surface or semi-flush mounted.
The Xtratone sounder has been designed so that field cables can be terminated in the back box as a first fix.
The ZAIO-MI is both an input and output module in a modern enclosure (2 gang box size) with well protected electronic circuit board to minimise any damages during installation.
The ZAI-MI is used to monitor and raise alarm from any ancillary equipment such as sprinkler flow switch, aspiration detectors, secondary fire control panel, beam detectors, external power supplies etc.
The Quatro system network has the facility to monitor, indicate and control the functions of a re alarm installation, thus allowing signals to be distributed around a large site.
The networking is normally wired in a ring using Fireproof Communication Cable. Each panel will need a network card added to the termination board (when using QT-NC). Optionally the network ring can be wired with bre optic cable (using QT-NC/FP).
| Model Number | Description | |
|---|---|---|
| QT-NC |
This card provides;
|
|
| QT-NC/FP | This card has built-in fibre optic terminals in/out, suitable for network only (printer output is NOT available with this card). | |
| QT-GNC | Similar to QT-NC which provides both repeater and printer output in addition to LAN connection for TCP-IP & graphic interface. |
The MkII range of detectors can be mounted on 3 different bases, a shallow base (MKII-CB), a deep base (MKII-CB/D) and an isolator base (MKII-IB).
Fyreye MKII Addressable Common Base for use with MKII-AOPI, MKII-AHRI, MKII-AHFI & MKII-AOHI.
| Model Number | Description | |
|---|---|---|
| MKII-CB | MKII Shallow Common Base |
|
| MKII-CB/D | MKII Deep Common Base | |
| MKII-IB | MKII Isolator Base |
