Alitco Group

Dubai, United Arab Emirates

Doors are designed to control sound as complete unit (doors, frame & sound control gasketing).Full-Flush Doors an interlocked, hairline seams on vertical edges and have no visible seams on faces .Doors specified seamless have no visible seams on faces or vertical edges. Face sheets are totally supported by a special core is used to obtain high STC rating 35 t50 depending on the project requirements. Acoustical Doors & Frames are supplied with sound control gasketing as it is part of the assembly as shown in the drawing, the top and bottom of the door edges closed by 1.5mm steel channel welded in place. the top and bottom edge channels are flush.

Doors are designed to protect even from bullets. Full-Flush Doors an interlocked, hairline seams on vertical edges with a seam that is welded the full height of door. Such welds are ground, Filled and dressed smooth. Seams are not visible and surface is smooth. Face sheets are totally supported by vertical stiffeners supported with special Armor Plate to protect from bullets in accordance with UL752 , This series is supplied complete with Frame & Hardware .The top and bottom of the door edges closed by 2.0 mm steel channel welded in place .The top and bottom edge channels are flush.

Doors are designed for high traffic areas. Full-Flush Doors an interlocked hairline seams on vertical edges and have no visible seams on faces. Doors specified seamless have no visible seams on faces for vertical edges. Face sheets are supported by 0, 8 mm thick .steel vertical stiffeners are placed no more than 150 mm apart and welded no more than 150 mm along their length, Fiberglass or Rockwool insulates the area between stiffeners. Inverted top channel with closer cap and inverted

Full-Flush Doors an interlocked, hairline seams on vertical edges and have no visible seams on faces. Doors specified seamless have no visible seams on faces or vertical edges. A one piece, one inch cell, kraft-fibre honeycomb slab is securely bonded to both faces sheets under pressure with contact adhesive. The top and bottom door edges are closed by 1.5 mm steel channels welded in place. The top edge channel is flush and the bottom edge channel is inverted.

Is the Architect choice of doors for its high insulation from heat. Full-Flush Doors an interlocked, hairline seams on vertical edges and have no visible seams on faces. Doors specified seamless have no visible seams on faces or vertical edges. Face sheets are totally supported by a foam-in-place polyurethane core. The core fills the entire door cavity and is chemically bonded to all interior surfaces.

Doors are designed for maximum security in accordance with HMMA 862-87. Doors are supplied seamless with no visible seams on faces or vertical edges. Face sheets are totally supported by 2.0 mm thick steel vertical stiffeners placed no more than 150 mm apart and welded no more than 150 mm along their length Fiberglass or Rockwool insulates the area between stiffeners. The top and bottom door edges are closed by 3.0 mm inverted steel channel welded in place.