Sharjah., United Arab Emirates
Write a Review
Our Products
Spray Paints
2 Products availableSolvent Based Adhesives
2 Products availableAdhesives
2 Products availableLubricants
2 Products availableCar Interior Accessories
1 Products availableAutomotive Cleaners
1 Products availableLeading Manufacturer, Supplier & Retailer of Dashboard Wax Spray, Auto Protectant, TEMPERATURE GASKET MAKER and AC Cleaner.
DOLPHIN Auto Protectant (multipurpose)
Provides long lasting superior UV protections. Appropriate to apply in exterior and interior on any rubber, vinyl, and plastic surfaces of vehicle such as: dashboard, leather seats, windshield wiper blades and tires.
Prevents drying, cracking and fading caused by exposure to the sun. The surface stays dry with clear and matte finish. Keep your automotive interior, exterior shines and transformed/ replenish like in new condition.
Video Application:
https://www.youtube.com/watch?v=M9WlaUM87-k
Content : 295 ml /118 ml
Packing : 24 Pcs / Ctn
Shelf life :12 months
| S. No. | PROPERTIES | DETAILS |
| 1 | Composition | Pure Acrylic Polymer + Pigment + Solvents + Standard CFC Free Gas |
| 2 | Specific Gravity | 0.90±0.05 |
| 3 | %NVA - ASTM - D1644 | 18% ± 3.00 |
| 4 | Viscosity on Zhan Cup | 30.00 ± 3 sec |
| 5 | Inside Pressure MPa @28 degree C | 0.4-0.5 MPa |
| 6 | Flash Point ASTM - D93 | 7.00 ± 3 |
| 7 | Drying Time | 5-8 minutes |
| 8 | Hard dry ASTM – D – 1640 | Minimum 1 hour |
| 9 | Finish | Smooth |
| 10 | Film hardness ASTM D - 3363 | Flexible, Hard film |
| 11 | Res. to washing & abrasion | Satisfactory |
| 12 | Res. to heat and humidity | Satisfactory up to 60 degree C with high humidity |
| 13 | Hot water test | Passes and satisfactory |
| 14 | Filling ratio | Max 90% of the total volume of can |
| 15 | Recommendations | Decorative & Industrial Use (Exterior and Interior) |
| 16 | Spray Rate | 98% STD – Result 99% |
| 17 | Shelf life | 3 years |
|
S.NO |
PROPERTIES |
DETAILS |
||
|
1 |
|
Product Name |
Hi-Stick |
|
|
2 |
|
Composition |
Pure Acrylic Polymer + Pigment + Solvents + Standard |
|
|
|
|
|
CFC Free Gas |
|
|
3 |
|
Specific Gravity |
0.90±0.05 |
|
|
4 |
%NVA - ASTM - D1644 |
18% ± 3.00 |
|
|
|
5 |
Viscosity on Zhan Cup |
30.00 ± 3 sec |
||
|
6 |
Inside Pressure MPa @28 Degree C |
0.4-0.5 MPa |
||
|
7 |
Flash Point ASTM - D93 |
7.00 ± 3 |
|
|
|
8 |
Drying time (Surface dry) |
5-8 minutes |
||
|
9 |
Hard dry ASTM – D - 1640 |
Minimum 1 hour |
||
|
10 |
|
Finish |
Smooth |
|
|
11 |
Film hardness ASTM D - 3363 |
Flexible, Hard film |
||
|
12 |
Res. to washing & abrasion |
Satisfactory |
||
|
13 |
Res. to heat and humidity |
Satisfactory up to 60 Degree C with high humidity |
||
|
14 |
|
Hot water test |
Passes and satisfactory |
|
|
15 |
|
Filling ratio |
Max 90% of the total volume of can |
|
|
16 |
Recommendations |
Decorative & Industrial Use (Exterior and Interior) |
||
|
17 |
|
Spray Rate |
98% STD – Result 99% |
|
|
18 |
|
Shelf Life |
3 Years |
|
|
Basic Component |
Polyurethane |
|
Type |
Gun type and straw type available |
|
Appearance |
Foam |
|
Color |
Light yellow |
|
Tack-Free Time(min) |
8~10 |
|
Cutting Time(min) |
30(+25 Degree C) |
|
Density(kg/ sq. m) |
17~22 |
|
Expanding (times) |
Utmost 60 |
|
Thermal conductivity(mW/ (m·K) |
<34 |
|
Adhesive strength(kPa) |
>120 |
|
Tensile strength(kPa) |
>30 |
|
Compressive strength(kPa) |
>120 |
|
Close cells rate(%) |
35~40 |
|
Water absorption(up to 24h) |
≤1.5% (no epidermis) |
|
Fire Class of the cured foam |
B2 |
|
Dimensional stability(23℃) |
0~1.0%(foaming direction) |
|
|
0~1.8%(flat direction) |
|
Environment |
Contains no CFC’s, no HCFC’s, Ozone friendly |
|
Toxicity of cured foam |
Non-toxicity |
|
Cured foam temperature endurance(℃) |
-40 to +110 |
|
Processing temperature(℃) |
+5 to +35 |
|
Shelf life (month) |
12 |
Sp.chockalingam (Al Muqarram Insulation Material Industry)Industrial Area 15, sharjah, United Arab Emirates, Sharjah., United Arab Emirates
Share us via
