Anchor Allied Factory Ltd.

United Arab Emirates

ASMACO PU Foam Sealant B1 is quick setting single component polyurethane foam with fire retardant properties. It meets the extremely stringent requirements of DIN 4102 Part 1 for Construction Materials;Class B1 where fire ratings of 30min to 4 hours are achievable. Once cured, the foam can be cut, sawn or plastered over after only one hour providing the working temperatures (can and surfaces) are between +5 to +30oC, ideally 20oC.

FEATURES:High degree of fire rating: slows down the passage of flames and smoke.Quick setting - can be cut, sawn or plastered in 1 hour.Economical in use - 300% Triple Expanding foam.Fills irregular and broad gaps where most conventional fillers would fail.Possesses insulating and sound deadening properties.Non flammable propellant.Excellent adhesion & filling capacity and high thermal & acoustical insulation valve.Excellent mounting capacity and stability.Adheres to almost all building materials with the exception of surfaces such as polyethylene, Teflon, silicone and surface contaminated with oils and greases, mold release agents and similar materials.Mould proof, water proof, over paintable.Quick drying, moisture curing.Closed cell structure, resistant to water absorption.Cured foam dries rigid and can be trimmed, shaped and sanded.Suitable for sealing high volume low moment gaps.It does not contain any propellant gases that are harmful to the ozone layer

Detail:

Single component Neutral Cure Weather Silicone Sealant. The non staining properties makes it ideal for granite and marble applications. It is a low VOC product.

The product is tested and certified forISO 11600 F 20 LM

FEATURES:

• Easy - to - use one component type.
• Cures at room temperature at ambient humidity conditions.
• No surface pre-treatment or primer required in most of the surfaces.
• Outstanding adhesiveness to many substrates,
• Non-corrosive.
• Anti Fungus grade for sanitary applications
• Excellent durability
• Low VOC as per green building norms

Detail:

Polyurethane Direct Glazing & Structural Bonding Adhesive Sealant

Asmaco PU 72is an excellent, non-sag, one-component, flexible and high performance polyurethane adhesive that cures on exposure to atmospheric moisture to form a tough, durable adhesive. it is non conductive allowing the correct bonding to glass incorporating radio antenna or additional electrical equipment

KEY PERFORMANCE PROPERTIES:

One-componentLow odorBonds and seals at the same timeShort tack free and curing timeVery high thixotropy for good gap filling propertiesAdhesion to a wide range of substratesNon-staining curing processNon-corrosiveInitial load bearing capacityIncreases tortional stiffness of final assemblyShock/Impact resistantVibration and sound damping PropertiesDrive Away Time: 3 hours (throughout operating window of -5C to +40C)

Detail:

For Structural Bonding and Sealing in the BTR Industry

ASMACO PU 81 is a high-quality multipurpose non-sag 1-c polyurethane sealant that cures on exposure to atmospheric humidity to form a durable elastomer. Meets approvals ASTM C920 types and ISO 11600 Classification F 25 HM.

KEY PERFORMANCE PROPERTIES:

One-component PolyurethaneResistant to ageing and weathering exposureShort cut-off stringNon-corrosiveCan be over-paintedBonds well to a wide variety of substratesSuitable for use with integral aerials.Prevents contact corrosion in aluminum-body vehicles.

Detail:

Single component High Temperature Neutral Gasket sealant. Ideal for use in Engine, gear box, oil pumps, radiators and other engine parts.

It is available in Red Colour.

Detail:

Polyurethane Direct Glazing & Structural Bonding Adhesive Sealant

Asmaco PU 72is an excellent, non-sag, one-component, flexible and high performance polyurethane adhesive that cures on exposure to atmospheric moisture to form a tough, durable adhesive. it is non conductive allowing the correct bonding to glass incorporating radio antenna or additional electrical equipment

KEY PERFORMANCE PROPERTIES:

One-componentLow odorBonds and seals at the same timeShort tack free and curing timeVery high thixotropy for good gap filling propertiesAdhesion to a wide range of substratesNon-staining curing processNon-corrosiveInitial load bearing capacityIncreases tortional stiffness of final assemblyShock/Impact resistantVibration and sound damping PropertiesDrive Away Time: 3 hours (throughout operating window of -5C to +40C)

Detail:

One component moisture cure, triple expanding (300%) Foam. Mainly used for thermal insulation, filling of joints and cavities in wall & ceiling.

Also available in Fire Retardant Grade

FEATURES

• 300% - Triple Expanding Foam
• Quick drying, moisture curing
• Closed cell structure, resistant to water absorption
• Excellent thermal insulation characteristics
• Suitable for sealing high volume low moment gaps.
• CFC Free

Detail:

One component moisture cure, triple expanding (300%) Foam. Mainly used for thermal insulation, filling of joints and cavities in wall & ceiling.

Also available in Fire Retardant Grade

FEATURES

• 300% - Triple Expanding Foam
• Quick drying, moisture curing
• Closed cell structure, resistant to water absorption
• Excellent thermal insulation characteristics
• Suitable for sealing high volume low moment gaps.
• CFC Free

Detail:

• Easy to use

• One part application

• Safe for Drinking water after full cure

• Rapid curing

• Strong, durable bond

• Meets BS & ASTM Standard

• Grey PVC - For use on pipes upto 12" dia.

Detail:

• Easy to use

• One part application

• Safe for Drinking water after full cure

• Rapid curing

• Strong, durable bond

• Meets BS & ASTM Standard

• Grey PVC - For use on pipes upto 12" dia.