Our Products
Electronic Filter
1 Products availableWater Treatment & Purification Plant
1 Products availableWater Treatment Plant
1 Products availableReverse Osmosis Plant
1 Products availableIndustrial Water Filters
1 Products availableFilling Line
1 Products availableClarifier
1 Products availableWater Softening System
1 Products availableSewage Treatment Plant
1 Products availableAnd WaterRental water / mobile water systems are available to meet any immediate need for treated water.
Equipment Options :
Capacities :
Salient Features :
Seawater Reverse Osmosis System are designed and manufactured for commercial applications for saline water / wastewater. They are pre-engineered, preassembled units that minimize installation and start-up costs. Their simple designs maximize reliability of the Seawater Reverse Osmosis unit. The major components are supported by the frame and designed in such a way to provide easy access for servicing, maintenance, and monitoring system performance. The RO unit includes a high pressure feed pump, FRP pressure vessels, and thin film composite RO membranes. Each RO unit also includes PVC low-pressure piping; high pressure fittings in SS and low pressure fittings in PVC for reject recycle and product piping, and a system controller.
Pre Treatment :
Seawater Reverse Osmosis :
Optional Features : Pre Treatment :
Seawater Reverse Osmosis :
Applications :
Industry :
Seawater Water Reverse Osmosis
Inlet Water Quality | |
---|---|
Tss | < 5 Ppm* |
Tds | 35000/45000 * Ppm |
Water Temperature | 5 – 35 Deg C |
Oil | Nil |
Standard Features | |
Capacity | 10 M3/D – 2400 M3/D |
Working Pressure | 55 – 65 Bar |
Inlet Pressure | 2-3 Bar |
And Water Package Sewage Treatment Plants are designed to provide odourless, compact treatment of domestic wastewater. The systems are modular, reliable, easy to maintain with options of tertiary treatment and sludge handling units. The systems are available in capacities raging from 2m3/d to 400 m3/d in single stream.
Technologies offered include :
Typical Package Plant :
Optional :
The Systems Are Designed On Following Parameters
Typical Inled Water Parameters :
Parameters | Unit | Concentration |
---|---|---|
Flow Rate per person | LT/day | 200 |
Wastewater Type | - | Domestic |
Organic Load Domestic BOD | mg/l | 300 |
Total Suspended Solids load TSS | mg/l | 300 |
Chemical Oxygen Demand COD | mg/l | 450 |
pH | - | 6 - 9 |
Typical Treated Water Parameters :
Parameter | Unit | Treated Water |
---|---|---|
pH | - | 6 - 9 |
BOD5 | Mg/l | < 10 |
TSS | Mg/l | < |
Odour | - | Odourless |
Note : After Tertiary Treatment, After Secondary Treatment in MBR.
And Water Plate Clarifier systems are suitable for treatment of surface water and waste water with high levels of suspended solids.
Details :
Salient Features :
Options :
Ultrafiltration (UF) involves pressure-driven separation of materials from a feed solution. The technology achieves separation through sieving and is used to remove particulate and microbial contaminants, but does not remove ions or molecules of low molecular weight. The process typically operates with a feed pressure of 0.28 to 6.9 bar. UF plants are automated and have low operational labor requirements. UF systems are used to treat challenging water such as high turbidity surface waters, wastewater, and water with high concentration of heavy metals. UF systems are skid mounted complete with Pre Treatment and accessories such as instruments, backwashing / cleaning systems
Ultrafiltration :
Optional Features :
Applications :
Note :
Standard Specifications
Turbidity | < 100 NTU* |
---|---|
Water Temperature | 5 – 35 deg C |
Oil | Nil |
Standard Features | |
Capacity | 10 m3/d – 2400 m3/d |
Working Pressure | 4 bar |
Brackish water contains relatively high levels of dissolved salts and minerals. Depending on the location, it can range from 1, 000 to 10, 000ppm and high brackish is 10, 000 to 15, 000ppm. We offer solutions to all your brackish water problems. We manufacture both skid mounted and containerised brackish water systems, customised according to the client needs.
Pre Treatment :
Reverse Osmosis :
Optional Features :
Applications :
Industry :
Details
(BWRO) Design Conditions | Inlet Water |
---|---|
Quality | TSS - < 5 PPM* |
TDS | 500 – 10,000* PPM |
Water Temperature | 5 – 35oC |
Oil | Nil |
Standard Features
Capacity | 10 m3/d 2400 m3/d * |
---|---|
Working Pressure | 10 bar 30 bar Inlet |
Pressure | 2-3 bar |
Water Softener Systems offer a cost-efficient and effective method for reducing hardness due to calcium and Magnesium from water. Softener systems are composed of epoxy lined and painted carbon steel pressure vessels or FRP with a front-mounted control unit for ease of service. Regeneration is initiated by either time or differential pressure
Options :
Applications :
Standard Specifications
Configuration | Simplex / Duplex |
---|---|
Design Code | PED / Equal |
Design Pressure | 6 bar |
Material OF Construction | |
Vessel | CS Epoxy Coated Internally / FRP |
Frontal Piping | PVC |
Valves | |
Type | Manual / Automatic |
Sizes upto 1.0 m dia | Multiport / Diaphragm valve |
Size 1.0 m dia and above | Butterfly |
Electrical | 240 V , 50 Hz, 1 ph / 115 V , 60 Hz, 1ph |
Media | Cation Resin |
Brine Tank | PE |
Multimedia filters offer a cost-efficient and effective method for reducing suspended matter from water. Multimedia filters are composed of epoxy lined and painted carbon steel pressure vessels or FRP with a front-mounted control unit for ease of service. Regeneration is initiated by either time or differential pressure.
Options :
Applications :
Standard Specifications
Configuration | Vertical / Horizontal |
---|---|
Design Code | PED / Equal |
Design Pressure | 6 bar |
Material OF Construction | |
Vessel | CS Epoxy Coated Internally / FRP |
Frontal Piping | PVC |
Valves | |
Type | Manual / Automatic |
Sizes upto 1.0 m dia | Multiport / Butterfly 5 valve |
Size 1.0 m dia and above | Butterfly |
Electrical | 240 V , 50 Hz, 1 ph / 115 V , 60 Hz, 1ph |
Media | Graded sand, Single Media, Dual |
Water Filtration Systems : Activated carbon filters offer a cost-efficient and effective method for removal of free chlorine / organics from water. Activated carbon filters are composed of epoxy lined and painted carbon steel pressure vessels or FRP with a front mounted control unit for ease of service. Regeneration is initiated by either time or differential pressure
Options :
Applications :
Standard Specifications
Configuration | Vertical |
---|---|
Design Code | PED / Equal |
Design Pressure | 6 bar |
Material OF Construction | |
Vessel | CS Epoxy Coated Internally / FRP |
Frontal Piping | PVC |
Valves | |
Type | Manual / Automatic |
Sizes upto 1.0 m dia | Multiport / Butterfly 5 valve |
Size 1.0 m dia and above | Butterfly |
Electrical | 240 V , 50 Hz, 1 ph / 115 V , 60 Hz, 1ph |
Media | Activated Carbon , Gravel underbed |
And Water provides entire range of Demineralisation Systems consisting of :
The Two Bed Cation /Anion water demineralizers consist of two separate packed-bed columns one containing a cationic, the other an anionic exchange resin with high ion exchange capacity.Unlike other very complicated units, the Model 2CA demineralizers are built to be simple, functional and reliable with tested, long-lasting components needing minimal maintenance.All components are made of acid-resistant materials. The ion exchange resins are packed in vinylester columns resistant to water pressure. Regeneration is initiated by either time or differential pressure
Options :
Applications :
Standard Specifications
Configuration | Vertical |
---|---|
Design Code | PED / Equal |
Design Pressure | 6 bar |
Material OF Construction | |
Vessel | FRP / CS Rubber lined Internally |
Frontal Piping | PVC |
Valves | |
Type | Manual / Automatic |
Sizes upto 1.0 m dia | Multiport / Diaphragm |
Electrical | 240 V , 50 Hz, 1 ph / 115 V , 60Hz |
Media | Cation Resin, Anion Resin. |
Iron Removal filters offer a cost-efficient and effective method for removal of Iron and Manganese from water. Iron Removal filters are composed of epoxy lined and painted carbon steel pressure vessels or FRP with a front-mounted control unit for ease of service. Regeneration is initiated by either time or differential pressure.
Options :
Applications :
Standard Specifications
Configuration | Vertical |
---|---|
Design Code | PED / Equal Design |
Pressure | 6 bar |
Material OF Construction | |
Vessel | CS Epoxy Coated Internally / FRP |
Piping Frontal | PVC |
Valves | |
Type | Manual / Automatic |
Sizes upto 1.0 m dia | Multiport / Butterfly 5 valve |
Size 1.0 m dia and above | Butterfly |
Electrical | 240 V, 50 Hz, 1 ph / 115 V, 60 Hz, 1 ph |
Media | Birm, Greensand , Pyrolusite. |
Fluoride Removal filters offers a cost-efficient and effective method for removal of Fluoride from water. Fluoride Removal filters are composed of epoxy lined and painted carbon steel pressure vessels or FRP with a frontmounted control unit for ease of service. Regeneration is initiated by either time or differential pressure.
Options :
Applications :
Optional Features :
Under Industry :
Standard Specifications
Configuration | Vertical |
---|---|
Design Code | PED / Equal Design |
Pressure | 6 bar |
Material OF Construction | |
Vessel | CS Epoxy Coated Internally / FRP |
Piping Frontal | PVC |
Valves | |
Type | Manual / Automatic |
Sizes upto 1.0 m dia | Multiport / Butterfly 5 valve |
Size 1.0 m dia and above | Butterfly |
Electrical | 240 V, 50 Hz, 1 ph / 115 V, 60 Hz, 1 ph |
Media | Activated Alumina, Fluoride Removal |