Post Buy Requirement
AF
Sharjah, United Arab Emirates
Add Review

Other Products / Services

Euro Fuel Dispensing Pump

Eurostar ET and DT Fuel Dispenser Series: Eurostar ET xx-MP(Suction Type) and DT xx-MP (Dispenser Type) Petroleum dispensers are designed specifically for those needing exclusive solution for heavy-duty petroleum retailing solutions. Main Features :
Eurostar Fuel Dispensers optimize your business with its compact design across every market while keeping your budget.
ATEX approved design.
MID approved hydraulics make you sure about accuracy.
Capacity : 45 , 70 or 120 lt/min.
From 2 grades, 2 nozzles to 5 grades and 10 nozzles configurations.
WYN-Dart compatible automation connection
Volume or Monay preset filling.
Fuel Dispensers are offered in a choice of configurations, with a selection of options to meet existing and anticipated needs.

View Complete Details

Petroleum And Oil Suction Discharge Hose

The most vulnerable link in the chain of production, distribution and use of bulk hydrocarbons is the point of transfer. Compo flex produces a comprehensive range of composite hoses, specially and easily handle hydrocarbons including oils, petrol, diesel, lubricants, oils, paraffin and 100% aromatics, in all kind of transfer.

View Complete Details

GPI Mechanical Flow Meters

GPI mechanical flow meters are constructed in three and four digit display and having more than 30gpm, the world wide brand quality and smooth working condition is the one of the best feature Of GPI meters.

View Complete Details

B Screwed Water Meter

The success of B METERS in markets around the world is the result of the great attention paid to the provision of high quality products which is the result of an extremely accurate design phase. Thanks to our experience combined with the most modern techniques of design, calculation and testing, we have been able to create water meters with a unique technology content and design.

View Complete Details

Economy Water Flow Meter

This economy water flowmeter is an ideal alternative to traditional water meters. The TM Series water meters offer flow rate and flow total indication that help monitor water flow in waste water applications, water treatment, and sub-metering applications. The battery powered electronic display TM Series water flowmeters are calibrated to read in gallons and liters per minute.

View Complete Details

Elster Water Meter

Elster Water Metering is an industry leader in the development and implementation of innovative metering solutions to the water industry and is committed to address the unique challenges the industry faces, including increasing customer demand and water scarcity.

View Complete Details

Gorman Rupps Self Priming Pumps

Gorman-Rupp's self-priming pumps are easy to operate and service. They can run high and dry above the water level, so maintenance can be completed quickly and easily. We manufacture a full line of these versatile self-priming pumps specially designed for dirty water, limited solids and clear liquids applications. Self-priming pumps are available as basic units or may be flex-coupled, V-belt driven or engine mounted.

View Complete Details

Ranger Pumps

Ranger, Inc. manufactures a precision built helical gear pump for industrial applications. The capacity range is available from 25 GPM to 360 GPM and pressures to 125 PSI. Ranger Pumps are designed to use as low speed pumps for both low and high viscosity liquids. Viscosities upward to 1, 000, 000 SSU (200, 000 CP) can be pumped. Ranger pumps sizes are 2", 2-1/2", 3" & 4" in size. Flows are 20 GPM to 360 GPM with pressure capabilities to 125 PSI (862 KPA). Ranger also has Basket-Type Line Strainers & Foot Mounted Gear Reducers available.

View Complete Details

SILI KCB Pump

The SILI KCB pump is horizontal positive displacement gear oil-pump. These gear oil pumps use two identical gears rotating against each other, the drive gear operates the idler gear. Liquid flows into the cavity of the teeth and is directed and pressurized toward the discharge port by the gear rotation. KCB gear-pump is suitable for oil max temp 100 degree, viscosity range 5 to 1000cst, (specially mechanical seal for 200 C degree)

View Complete Details

ROTAN Pumps

ROTAN pumps are manufactured in accordance with DESMIs quality management system, which is certified by BVQI in accordance with the requirements of ISO 9001. DESMI produces pump units for potentially explosive environments.

View Complete Details

Premium Duty Spring Retractable Hose Reels

Series 4000 & 5000 1/4, 3/8, 1/2 I.D Spring Driven Air / Water / Oil / Grease Series 4000 & 5000 reels are durable and compact for a wide range of applications with critical space requirements. A full flow shaft and swivel assures maximum product delivery. The standard low pressure hose is for air or water service only. The basic reel without hose can be used for air, water or oil. Consult Reelcraft for other products and hoses. Four 5/16 (8mm) diameter mounting holes.

View Complete Details

Medium Duty Spring Retractable Hose Reels

Series RT 1/4, 3/8, 1/2 I.D
Spring Driven Air / Water / Oil / Grease
Reelcrafts Series RT is an economical choice for a medium duty, lighter-weight, spring retractable hose reel for applications that are less demanding, yet require a product that can withstand industrial and commercial use. The industrial-grade drive spring is protected from the environment in a polypropylene spool for longer service life. Guide arm adjusts to seven positions.

View Complete Details

Slip-on Flanges

The Slip-On flange has a low hub because the pipe slips into the flange prior to welding. It is welded both inside and out to provide sufficient strength and prevent leakage. Slip-on flanges are all bored slightly larger than the outside diameter of the matching pipe. They are preferred over welding neck flanges by many users due to their lower initial cost, but total cost after installation is probably not much less than that of the welding neck flange because of the additional welding involved.

View Complete Details

Welding Neck Flanges

The welding neck flange is normally referred to as the high hub flange. It is designed to transfer stresses to the pipe, thereby reducing high stress concentrates at the base of the flange. The welding neck flange is the best designed butt-welded flange of those currently available because of its inherent structural value.

View Complete Details

Blind Flanges

The blind flange is a flange without a bore. It is used to close off the ends of a piping system and/or pressure vessel opening. It also permits easy access to the interior of a line or vessel once it has been sealed and must be reopened.

View Complete Details

Threaded And Socket Weld

Type :Threaded (NPT & BSPT) & Socket Weld.
Size Range : 1/8 6.
Pressure :CL150.
Specs :ASTM A197/ A153/ A536 (UL, ULC, FM), 304, 316.
Brand :Lame, Bothwell, JD.
Origin :Italy, France, Taiwan.

View Complete Details

Ball Valves

Known for its robust design, superior sealing areas, and stainless steel overlays, these ball valves enables full fluid flow with minimal pressure drop, making them ideal for handling viscous liquids. we are widely recognized as the leader in providing valve solutions for the oil and gas industries most severe service applications. These design features allow us to provide valves with unmatched durability, safety and long-term performance. Size Range: 1/2 12 Pressure: ANSI CL150 to CL800 & Up to 3000 PSI End: NPT Threaded, Socket Weld, Flanged Material: Cast Iron, Cast Steel, Forged Steel, Stainless Steel, Brass/Bronze Origin: Italy, Germany, Korea, India, China, Taiwan

View Complete Details

Safety Valves

Safety Valve is a one type of valve that automatically actuates when the pressure of inlet side of the valve increases to a predetermined pressure, to open the valve disc and discharge the fluid ( steam or gas ) ; and when the pressure decreases to the prescribed value, to close the valve disc again. Safety valve is so-called a final safety device which controls the pressure and discharges certain amount of fluid by itself without any electric power support. Safety Valves are mainly installed in chemical plants, electric power boilers, gas storage tanks to prevent the pressure vessel from exploding / damaging.

View Complete Details

Float Valve

Hassann Al Arabian Falcon offers noncorrosive, heavy duty, and high quality PVC float valves. These float valves are made of a high grade NSF rated PVC. These valves utilize the latest materials for increased performance, reliability, and economy. Hassann Al Manaeis PVC float valves are the cost effective alternative to stainless steel and the noncorrosive alternative to a brass float valve.

View Complete Details

Pressure Gauges

Our Mechanical Pressure Gauges represent the industry standard and are designed to provide lasting service in extreme operating conditions when properly applied. We have a pressure gauge for almost every application.

View Complete Details

Temperature Gauges

With exclusive design to resist shock and vibration, and no gears to wear or misaligned, our thermometers provides increased instrument life. Our thermometers have 1% of accuracy span and come in available ranges from -320F to 1200F. Different mounting options: surface, finish, flush and direct mounted, meet a variety of applications. The sizes available range from 3.5 to 8.5.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Ali (Arabian Falcon)
  • Oil Field Equipment Trading Po.Box : 6103 Caterpillar Road, Sharjah,, United Arab Emirates
  • Share us via