Our Products
Card Printer
2 Products availableFinger Print Scanner
1 Products availableBatteries
1 Products availableDoor & Window Fittings
1 Products availableDoor Hardware
1 Products availablePush Button Switches
1 Products availableElectronic Locks
1 Products availableTags
1 Products availableAccess Control System
1 Products availableWe are leaders in the market for providing best range of Scan Keyless Access Control Solution, Reader Modules, S-Series Access Portal controller, Access Portal Cluster Controller and MorphoAccess SIGMA Lite
Impro Uniscan and Flexiscan RangeCost Effective Keyless Access Control Solution - The system is completely configured on the Controller. No need for a PC or software.Features:Supports 99 Tag holdersUp to 150m from Controller to ReaderSimple to configure using buttons on the controllerSupport configuration lock using button pattern codeSupport 125 kHz Passive Tags or Pin-code & 4 button RF TransmitterEach Relay can be set to Toggled or Pulse modeHardware uses Impros proprietary S-bus protocol which comes standard with AES 128 bit encryption with key exchange
UniScanOffers 1 door control through the single relay on the ControllerSupports a single RF or Proximity readerSystem is supplied as a kit with the UniScan Controller + the selected readerFlexiScanOffers up to 4 door control using either the relays located on the Controller or using remote relay unitsSupports up to 8 RF and/or Proximity readers to control the 4 doorsThe system is supplied as individual units
Access Portal reader modules simply clip into the cluster controller for one of the most rapid installation procedures ever seen. With just one click, your power and communication cabling is done. Alternatively, the reader module can be installed up to 150m* from the cluster controller.
Mix and match
Up to eight modules, of any variant, can be installed with a single cluster controller. This provides a huge amount of flexibility to meet different installation needs, with off-the-shelf hardware, as well as significant cost savings.
Features of the modules:
Hot swappable
Up to eight modules per cluster controller
LED diagnostic indicators
Onsite firmware upgrades
End-of-line sensing
Variants
Wiegand: most common communication method for access control devices. Enables the use of third party products such as biometrics, ANPR and long-range readers. Two readers per module.
Antenna: the older 125KHz communication protocol, ideal for cost sensitive markets not requiring high functionality. Two readers per module.
S-Series: highly cost-effective solution with anti-cloning protection and secure proprietary encryption, using three-core cabling. Four readers per module.
IO8: comprises eight digital inputs and eight relay outputs, for multiple connect/disconnect options such as elevators, intrusion systems and lighting control.
Impro offers a diverse array of access control readers, to meet a variety of installation requirements. We offer interior and exterior readers, one of the smallest reader footprints, to traditional junction box mountings.
Most readers are available as multi-discipline versions, ensuring that legacy 125kHz proximity tags and the new 13.56MHz ranges are able to be read.
You can also choose between fingerprint biometric readers, keypads and non-keypad variants.
Multi-discipline readers (MDR/MDK)Multi-discipline junction box readers (MJR/MJK)
Wiegand metal harsh environment readersAntenna readers
LCD biometric time & attendance readers (MDTA/BMTA)
Multi-discipline tag retention readers (DBv)
Mobile Portal Handheld Reader
UHFReceiver
We offer a variety of access control tags to meet your specific requirements.
Our tags include both 13.56MHz Mifare tags and legacy 125kHz tags, as well as units that operate on dual frequency of both Mifare and Omega (125kHz). We also have the anti-cloning S-Series credit card tag, which incorporates a proprietary encryption for additional security, as well as SEOS cards.
A range of styles is also available, from the ever popular credit card tag, to rectangular key rings, round button tags and slim long range tags.
We also offer a four button transmitter tag, for those wanting to drive relays, such as for a gate.
The Access Portal S-SERIES comprises cost-effective hardware that seamlessly operates on Impro Technologies Access Portal management software, to provide a holistic access control system.
A key feature of the S-Series is the ability to operate up to eight SIR readers or four APB doors from a single module. The clustering concept also ensures zero downtime, as modules are plug and-play simply unplug and replace. Expansion of a system is just as easy, whereby additional controllers and modules are quickly and effortlessly added as needed. The system caters for redundancy as transactions reside in the controller, as well as the server. Should a connection to the server be lost, or compromised, there is no catastrophic failure or security breach, as the controller continues to interdependently operate and, once back online, seamlessly uploads transactions to the server.
Installation time and cost is improved through the use of three-core cable, and the system supports a variety of installation topologies such as star, tree, daisy-chain and multi-drop for unrivalled flexibility. Another installation benefit is the ability for the reader to be installed up to 150m from the module.
The S-Series uses 125kHz RFID secure technology that protects against tag cloning to prevent unauthorised users from accessing the premises, as well as encrypted communication between the controller and module for added security. The solution is ideal for small to large installations, due to the option of a touchscreen LCD controller with embedded software which doesnt require a PC, or server-based system. The S-Series operates seamlessly with the full range of Access Portal software.
Features:
Cost effective: one of the most price competitive systems
Secure: uses trusted anti-cloning tag technology
Scalable: simple plug-and-play for seamless expansion
Flexible: increased cable distance and ability to multi-drop
WHO SHOULD USE THE S-SERIES?
All installations, big or small, looking for:
Improved security
Reduced costs
Low-maintenance
Controlled access
Remote management
Reliability and convenience
PRODUCT BENEFITS:
Up to eight SIR readers or four APB doors per module
Reduced cabling and installation costs
Enhanced security with anti-cloning tags
Available in plastic housing or metal enclosure
The Access Portal cluster controller offers unrivalled simplicity and cost-effectiveness. True plug-and-play modular hardware means you simply plug units together and all the power and communication cabling is done for you, with just one click. Need to expand your installation? Simply plug more units together its that quick.
The power of cluster
The ability to plug a number of reader modules into one Access Portal controller is termed clustering. This is a highly cost-effective solution as one cluster controller can manage up to eight reader modules and 16 readers no longer are you constrained to one controller per door.
However, not everyone may want to cluster, so a controller can also be installed in one location and the reader module up to 150 metres away (thats the length of one and a half football fields).
A world of choice
The cluster controller is available with a touchscreen LCD, which is specifically designed for smaller installations to operate as a stand-alone system (no computer necessary); or without the LCD for sites using a computer or server.
The controller is also available in either a plastic housing, or in a secure metal enclosure for additional security.
Controller features include:
Full offline functionality
Ability to store up to 100, 000 transactions
Built-in anti-tamper switch
Optional touchscreen LCD
Compatible with all Access Portal modules
Compatible with all Access Portal software
The Access Portal cluster controller offers unrivalled simplicity and cost-effectiveness. True plug-and-play modular hardware means you simply plug units together and all the power and communication cabling is done for you, with just one click. Need to expand your installation? Simply plug more units together its that quick.
The power of cluster
The ability to plug a number of reader modules into one Access Portal controller is termed clustering. This is a highly cost-effective solution as one cluster controller can manage up to eight reader modules and 16 readers no longer are you constrained to one controller per door.
However, not everyone may want to cluster, so a controller can also be installed in one location and the reader module up to 150 metres away (thats the length of one and a half football fields).
A world of choice
The cluster controller is available with a touchscreen LCD, which is specifically designed for smaller installations to operate as a stand-alone system (no computer necessary); or without the LCD for sites using a computer or server.
The controller is also available in either a plastic housing, or in a secure metal enclosure for additional security.
Controller features include:
Full offline functionality
Ability to store up to 100, 000 transactions
Built-in anti-tamper switch
Optional touchscreen LCD
Compatible with all Access Portal modules
Compatible with all Access Portal software
The Access Portal cluster controller offers unrivalled simplicity and cost-effectiveness. True plug-and-play modular hardware means you simply plug units together and all the power and communication cabling is done for you, with just one click. Need to expand your installation? Simply plug more units together its that quick.
The power of cluster
The ability to plug a number of reader modules into one Access Portal controller is termed clustering. This is a highly cost-effective solution as one cluster controller can manage up to eight reader modules and 16 readers no longer are you constrained to one controller per door.
However, not everyone may want to cluster, so a controller can also be installed in one location and the reader module up to 150 metres away (thats the length of one and a half football fields).
A world of choice
The cluster controller is available with a touchscreen LCD, which is specifically designed for smaller installations to operate as a stand-alone system (no computer necessary); or without the LCD for sites using a computer or server.
The controller is also available in either a plastic housing, or in a secure metal enclosure for additional security.
Controller features include:
Full offline functionality
Ability to store up to 100, 000 transactions
Built-in anti-tamper switch
Optional touchscreen LCD
Compatible with all Access Portal modules
Compatible with all Access Portal software
Engineered with the same attention to detail and performance as all SIGMA Family readers, the MorphoAccess SIGMA Lite terminals are specifically designed to equip narrow mounting surfaces, such as glass/aluminum door mullions, turnstiles, or server rack doors.
With two designs and multiple card reader options, there are a variety of models to address the widest range of deployment scenarios, both indoors and outdoors.
World's #1 fingerprint technology inside: 1:10, 000 user identification in 1 second
High capacity: 30, 000 templates, 250, 000 IDs in authorized user list, 1 Million logs
Anti-fraud features: fake finger detection, duress finger, timed anti-pass back
Flexibility: Prox, iClassor MIFARE/DESFire/NFC contactless card reader as an option
Embedded web server
Tough design: IP65 rated and vandal resistant (IK08)
Compatible with Morpho and Bioscrypt existing installations
Built on 20 years of proven direct-to-card printing expertise, the HID FARGO DTC1500 card printer and encoder offers the convenience and lower cost of high-capacity consumables along with a comprehensive feature set enabling organizations to routinely issue highly secure cards and IDs at a fraction of the cost without sacrificing quality. Designed for government ID projects, universities and colleges, K-12 schools, healthcare facilities, and small-to-medium businesses, the DTC1500 boasts of distinctive security features ideal for these organizations.
Innovative, built-in security features Easy-to-implement security features such as resin scramble data protection and custom overlay watermark come standard on every unit.
Low-cost, high-capacity consumables High-capacity, full and half-panel color ribbons significantly lower cost-per-card and reduce total cost of ownership.
Highly versatile Powerful printing in a modular, scalable design that simplifies in-field equipment upgrades and migration to higher levels of security.
Earth friendly GreenCircle Certified for efficient energy consumption and eco-friendly (ECO) refill ribbons.
Security, lower cost, innovation, and versatility it all comes standard with the DTC1500.
The ideal card printing solution for small businesses, schools, and local governments, the HID FARGO DTC1250e ID card printer and encoder is the fastest printer in its class, allowing you to produce 50% more visually-rich, full-color credentials in the same amount of time. Its small, compact footprint makes it easy to use in a variety of office environments and can be easily upgraded to include an embedded iCLASS SE encoder (part of the iCLASS SE platform), enabling you to produce secure, personalized membership and loyalty photo ID cards in one single, seamless step. An optional Wi-Fi accessory is also available to help you print anytime, anywhere.
Using the included Swift ID badging software, you can design custom ID cards on the spot, and the FARGO Workbench diagnostic utility software can help you easily maintain your card printer over time. The DTC1250e ID direct-to-card printer and encoder also features an intuitive, user-focused SmartScreen graphical display, enabling efficient set-up, operation and maintenance of your technology investment.
Backed by a global three-year warranty, each of our seventh generation HID FARGO card printers can be seamlessly integrated to work with other HID products, ensuring that you receive and retain the maximum value from the most trusted name in secure identity solutions.
FINGKEY Hamster II has a fingerprint sensing function and is a cutting-edge fingerprint sensor that prevents use of fake fingerprints. It can be connected to PC along with a nomal mouse and used for all the areas involving passwords and will be a competent security gadget without having to use a password, which is often hard to remember and misused by unauthorized persons.
USB Connection- USB 2.0 compatible interface, plug and play device- Supports multiple devices handlingSuperior Matching Engine- 1st in FVC(Fingerprint Verification Competition)- Auto-on FunctionAdvanced Optical Technology- Sensor resistant to scratches, impact, vibration and electrostatic shockInternational Standard Image Format and Interfaces- WSQ compression- ISO 19794-2/4, ANSI 378, NFIQHigh Quality Image CapturingStrong Performance for Wet / Dry Finger
Be it the home or office, the IXP20 Access Control system with its modern and sleek design, will complement the aesthetic appeal of any building while offering world-class security and control.
The IXP20 provides Impro Technologies tried and tested Access Control proficiency, taking you into the future with complete peace of mind.With the IXP20 system, access control is no longer reserved for the industrial or enterprise market.
The IXP20 access control range consists of two products and meets the requirements of one to eight door applications, incorporating full stand alone and independent functionality.
SPECIFICATIONS:1 000 tagholders
5 000 buffered transactions
1 8 doors
Up to 16 readers (8 APB doors)
Up to 3 tags per person
Up to 8 tagholder access groups