Our Products #5730215

AVAYO FTTH drop cable for connecting Network Access Point to the subscriber premises is designed with attributes such as flexibility, less weight, smaller diameter, ease of fiber access and termination. These cables are designed for indoor and out door applications with the optical cores in the centre protected and the parallel FRP on both sides. The outer jacket material is with LSZH compound.

Single Mode fiber G652D and G657A.

Small bend radius

Easy to strip, install and distribute.

Anti interference and anti side pulling

Good flame resistance LSZH

AVAYO fiber optic Connectors are available in different types such as LC, SC, SC/APC, ST, FC, FC/APC, MTRJ and E2000. The connectors are either epoxy type or fast connectors and are available for all fiber types including Single mode 9/125 microns, Multimode 50/125 microns and Multimode 62.5/125 microns fibers

Inter connect applications

Gigabit Ethernet applications.

As per TIA-568-C.3, IEC 60874

Optical LAN and CATV

AVAYO for proper cable management at racks, AVAYO designed cable organizer both horizontal and vertical types to provide neat and easy cable organizing solutions. The horizontal cable organizers are available in hook types, cover type and Brush panels

Cable management in wall mount and floor standing cabinets

19 horizontal rack mount types available in 1U and 2U standards.

Vertical types for 22U, 27U, 32U, 37U, 42U and 47U cabinets and open racks.

FTTH cabinets for customer premise designed in different models and sizes to suit customer requirement. These cabinets are available in single section or double section type with glass door, metal door, wall mount, flush mount and extended frame types.

Comply with ANSI/EIA-RS-310-D, IEC 297-2, DIN 41491

Available in 6U, 12U, 15U and 18U

AVAYO fiber optic patch cord consists of a single mode or multi mode fiber cord with two connectors at each end. The connector types are LC, SC, SC/APC, ST, FC, FC/APC, E2000 and MTRJ in simplex, duplex forms.

Inter connect applications

Gigabit Ethernet applications.

As per TIA-568-C.3, IEC 60874

Optical LAN and CATV

AVAYO fiber termination panel or optic patch used to terminate, protect and organize the fiber optic cables and optical fibers in the fiber optic communciation networks. The fiber patch panel is in a standard 19 inch rack mount size or wall mount type, with different models including 6 port and 8 port (wall mount). 12 port and 24 port rack mountable. The adapter interface can be ST, SC, FC and LC

Fiber back bone terminations

Fiber cable distribution

Data centre terminations

CATV head end applications

Premise cabling and central office applications

AVAYO fiber optic adapters are available in different types such as LC, SC, SC/APC, ST, FC, FC/APC, MTRJ and E2000 in simplex and duplex forms. The connectors and adapters are compatible with all fiber types including Single mode 9/125 microns, Multimode 50/125 microns and Multimode 62.5/125 microns fibers

Patch panels & distribution frames

Patch cords and pigtails

Direct termination

As per TIA-568-C.3, IEC 60874

AVAYO fiber optic pigtails consists of a single mode or multimode fiber cord, one end with connector and other end open for direct joining. The connector types are LC, SC, SC/APC, ST, FC, FC/APC, MTRJ, & E2000 in simplex, duplex and multi bundle forms.

Inter connect applications

Gigabit Ethernet applications.

As per TIA-568-C.3, IEC 60874

ptical LAN and CATV

Double section cabinets are designed for easy access of the rear side of a wall mount cabinet. The rear section of the cabinet mount to the wall and the front section hinged to the rear section with locks.

Housing CCTV, Servers, UPS systems, Network and MATV equipment

Comply with ANSI/EIA-RS-310-D, IEC 297-2, DIN 41491

Available in 6U, 9U, 12U, 15U and 18U

Modular roof panels with adjustment feature from 914mm to 1200mm (36 to 47.2 inches) length and 600mm or 800mm (23.62 or 31.5 inches) width made of steel structure and transparent acrylic sheet allows room light inside the containment area. Any height variation due to rack sizes can be adjusted by the use of height adjustment panels. Gaps between adjacent panels filled with self sealing rubber foam to prevent air leakage.

Perforated panels are made of complete steel panels or aluminium panels in 600x600mm size to achieve an airflow level of 20, 30 and 40 %. Steel square tube or aluminium tubes are welded on the bottom of a steel or aluminium sheet and makes perforations as required .Top finish can be anti static HPL or Vinyle and edge are fixed with conductive trim.

AVAYO wall bracket is an ideal alternative to full size racks for accommodating 19 patch panels. Size ranges from 2U, 4U, 6U, 9U and 12U these brackets designed to open from one end to enable easy termination and maintenance.

Housing 19 patch panels and cable organizers.

Comply with ANSI/EIA-RS-310-D, IEC 297-2, DIN 41491

Available in 2U, 4U, 6U, 9U and 12U

AVAYO four post heavy duty fixed shelf with a loading capacity of 50-100 kgs, available in different size to suit the required cabinets.

Cooling Fan :- 1 unit of 2 fans or 4 fans roof or door mount type,

Thermostat controlled.

Cable Management :- Vertical cable management system for 800mm wide racks

Shelves :- Fixed shelf, Sliding shelf and cantilever shelves.

Castors :- Heavy duty castors with stopper system

Leveling Feet :- 4 pcs leveling feet in addition to castors

Plinth :- 100mm heavy duty plinth with cable access provision.

Cage nuts :- Heavy duty cage nuts of 25 pcs set.

System Light :- Door operated system light

IP protection

Doors and side panels :- Additional IP rated gasket on doors and side panels.

Cable Entries :- Protected with IP rated gaskets and brush panels.

Air ventilation :- Side panels with Louvers to provide air ventilation

And the louvers are protected with stainless steel mesh.

AVAYO Outdoor cabinets made with heavy duty cold rolled steel or stainless steel or aluminum frame for our door applications. These cabinets are either with single frame or with dual frame and are custom built as per customer requirements .

Housing CCTV, Servers, UPS systems, Network and MATV equipment

Comply with ANSI/EIA-RS-310-D, IEC 297-2, DIN 41491

Available in wall mount and floor standing types