Dubai, United Arab Emirates
Write a Review
Our Products
Construction Aggregates
1 Products availableAdhesives & Sealants
1 Products availableTesting Equipment
1 Products availableCladding Materials And Building Panels
1 Products availableEpoxy Coatings
1 Products availableCement
1 Products availableWe are leaders in the market for providing best range of Road Base Material
Greenseal 100 is a cementitious waterproofing admixture, which is an integral part of concrete to through crystallization process when Greenseal 100s chemical agents react with water, a non-soluble crystalline will then be generated throughout the capillary voids in the concrete.
This crystalline is highly resistant to water, and it performs well even under extreme conditions such as pressures or aggressive chemicals. Cracks or voids up to a width of 1mm can be sealed up anytime by using Greenseal 100, through the crystallization process.
1 x 25 KG Paper Bag
Pallet size: 50 Bags
Crushed aggregate is made from crushing the stones derived from the mountains using specific methods and machinery to certain sizes. Crushed Aggregates come in different shapes, colors and sizes depending on the quarries and requirements of the customers. In UAE most of the mountains are located in the northern emirates of Fujairah and RAK; thus most of the crushing companies are located on the mountain side of these emirates.
Large size aggregate that is used for a wide variety of construction & landscaping applications. Aggregate 3/4 is most used in road building, landfilling as well as decorating works in landscaping projects.
Greenseal Flexi 201 is a flexible cementitious waterproofing that consists of two components. It consists of Portland cement, and selected well graded sand, formulated with specially selected and graded fine quartz and high quality latex to create brushable, smooth slurry with excellent bond and adhesion to most substrates.
It is suitable to be applied to concrete and mortar to prevent water infiltration by filling and sealing pores and voids or hairline cracks in substrates. However, it provides a breathable coating which allows water vapor transmission.
Liquid Membrane systems are great alternatives to the APP & SBS waterproofing membrane sheet systems. The liquid membrane can be applied by roller, brush or by spraying. This system can be easily applied to corners, angles, and non-uniform surfaces.
Liquid Membrane forms very good elongation and a flexible waterproof membrane after curing. If it is used in conjunction with Greenseal 108 Heat insulative coating, it forms a combo waterproofing system.
If it is used in conjunction with Greenseal 108 Heat insulative coating, it forms a combo waterproofing system.
If used with a layer of Fiber mesh these membranes can withstand penetration fromplant and trees roots, making it the perfect solution for landscaping and planter box waterproofing
Greenseal 5000 is a waterproofing system ideally used between slabs to protect them against the penetration and lateral movement of water. Greenseal 5000 waterproofing membrane is a cold applied, seamless, elastomeric single component moisture curing bitumen modified polyurethane, specially formulated for hand application by using squeeze or roller to vertical or horizontal surface. It should be applied directly from the container (liquid application).
Greenseal 5000 is designed especially for use as a flexible continuous waterproofing membrane between two-course concrete, between masonry construction and bituminous toppings and also for exterior below grade waterproofing of masonry.
Road Base is a blend of Gravel and fine material which, when compacted will form a hard surface with a high level of mechanical strength. This can be used as the main layer for laying the groundwork for creating a road. Our range of road base is of a high quality and is supplied in bulk quantities to any location in UAE
Sub Base is the layer of aggregate material laid on the subgrade, on which the base course layer is located. It may be omitted when there will be only foot traffic on the pavement, but it is necessary for surfaces used by vehicles. Our range of Sub Base is supplied in bulk quantities to any location in UAE
Greenshield 108 is an excellent energy conserving elastic coating designed for roof, walls, and substrates that require heat reflective & waterproofing protection. Greenshield 108 is a Green product that is eco-friendly and is safe for both the applicator and the environment. It is recommended for exterior use for all residential and commercial buildings. It is a water-based styrene acrylic co polymer resin system and filled with minute heat shield cells which act as a thermal resistant blanket covering the whole treated structure.
Greenshield 108 is a heat reflective coating and when applied, the Ultraviolet and heat rays are reflected and emitted from the surface, reducing the thermal conductivity between the substrate and the coating.
It is recommended for exterior use for all residential and commercial buildings. It is a water-based styrene acrylic copolymer resin system and filled with minute heat shield cells which act as a thermal resistant blanket covering the whole treated structure. Greenshield 108 is a heat reflective coating and when applied, heat rays are reflected and emitted from the surface, reducing the thermal conductivity between the substrate and the coating.
Greenshield 108 has many standard colours and colour shades which utilise a combination of IR-reflective pigments. This will exhibit a greater Total Solar Reflectance (TSR) than the exact same colour made with conventional pigments. Total Solar Reflectance (TSR) actually describes how much of the suns energy an object reflects.
When Greenshield 108 is applied on the surface, it helps to minimize the effects of the sun and improved the overall durability of the coatings as Greenshield 108 is a special weatherable formulation which can withstand the highest level of heat and chemical resistance over the years without significant degradation. This gives a long lasting effect, as its minute heat shield cells with infrared reflective pigment allows buildings to remain cool under the sun. Darker colours will give lower reflectivity only.
This gives a long lasting effect, as its minute heat shield cells with infrared reflective pigment allows buildings to remain cool under the sun. Darker colours will give lower reflectivity only.
White Cement is a hydraulic binder whose physical characteristics correspond to those of Portland gray cement. Its pure white color distinguishes it. This whiteness is the result of nature, as well as the rigorous selection of raw materials used in manufacturing and a technologically advanced production process.
Our White cement product is of the highest quality in the region. Our brand have been in the market for more than a decade. Supplying white cement to various small and large scale projects in Dubai, Sharjah and across other emirates in UAE as well as other GCC regions such as Oman & Qatar.For information regarding the product specifications, please do not hesitate to contact us.
Sadaf White Portland Cement is ideal for decorative concrete and Architectural Concrete applications, Masonry and Cementitious Building Products. A key advantage of using white cement for these applications is that it provides a base color which can be tinted to custom colors to meet any color spectrum demand
1 x 50 KG Bag
Minimum Order Quantity: One Full Truck Load / 100 Bags. (Free Delivery)
The product can also be loaded into 20ft containers for export. The FCL amount is 500 Bags equivalent to 25 tons.
BHMK Building Materials (BHMK Building Materials)M05, Speedex Center Bldg Salahuddin Rd, Deira Dubai, UAE. P.O 1903M05, Speedex Center Bldg Salahuddin Rd, Deira Dubai, UAE. P.O 1903
Share us via
