Demag Cranes & Components (Middle East) FZE

Dubai, United Arab Emirates

From the lifting and positioning of a load, to serving machinery or installations and loading we link processes to ensure seamless integration. Efficient, versatile and cost-effective. Our tailored solutions provide for:

• modular load handling concepts
• specific modifications for cost-effective applications
• efficient handling of large and small loads
• precise delivery of material to machining centres, machine tools and press lines
• cranes with manual control, semi or fully automated operating sequences
• high handling rates
• smooth and gentle material transport.

EPKE single-girder overhead travelling cranes are the cost-effective entry-level models in the Demag crane product range. They offer high levels of efficiency and are the optimum solution for light loads and relatively small spans. This is mainly due to the use of rolled-steel profile sections for the crane girder and specially developed travelling rope hoists or chain hoists. However, EPKE units also offer other benefits:

• end carriages of optimised design to suit the structure
• rigid standard I-beam girders for optimum load distribution
• efficient, fatigue-free load handling thanks to ergonomically designed control units
• low-sway travel motions for smooth handling and exact positioning of loads
• crane components offering high safety and reliability
• supplied with DR rope hoist or DC chain hoist.

Fully equipped, assembled and supplied just-in-time. You can eliminate any delivery time and interface problems with our MPW (Multi Purpose Winch) open winch crabs, which are ready to be installed. Precisely designed to meet the customer's specific requirements, MPW open winch crabs feature outstanding benefits.

• Modular design
• Few connection interfaces (drum, gearbox, motor and brake form a unit)
• Proven travel unit design used in our crane end carriages
• Jig-built crab frame
• Bolted crossbeam connection
• Minimum assembly requirement

Our DH hoist units can be used in a wide variety of applications, both as a travelling hoist on cranes or monorails and as stationary solutions. They offer a number of special technical features that enable loads to be handled reliably also for demanding requirements. Conical-rotor brake motors in combination with mechanical microspeed units facilitate particularly high numbers of starts/stops and duty factors. In combination with tried-and-tested contactor control, DH hoist units ensure reliable operation also in harsh environments with high ambient temperatures, high dust levels and aggressive atmospheres. Other features include:

• three sizes with load capacities up to 100 tonnes
• hook paths up to 104 m
• highly precise positioning with mechanical microspeed
• rope lead-off possible in any direction
• torsionally rigid frame open on all sides for bolted connection on all sides.

With our DC-Pro chain hoist, we meet our own high standards in terms of quality and innovation.The DC-Pro chain hoist is a fully featured, highly versatile chain hoist, which can be installed and put into service in minimum time. Many features that have to be ordered and bought as extras elsewhere are already integrated as standard. The result:

• "all inclusive" features at no extra cost
• two lifting speeds as standard
• improved safety thanks to 24 V contactor control, operating limit switches and elapsed operating time counter as standard
• slipping clutch with automatic cut-out by means of speed monitoring
• optimum ergonomics and ease of service
• main components are maintenance-free for up to 10 years.

Single-girder suspension cranes from our KBK light crane system enable you to achieve fast and reliable area-serving overhead handling and exact positioning of a wide variety of goods. What other qualities do our KBK single-girder suspension cranes offer?

• Modular system design
• Smooth and reliable handling
• Smooth manual travel
• Cost-effective implementation
• Customer-specific configuration to meet individual requirements

Our offset geared motors are specially designed for space-saving drive solutions. The housing design offers good ground clearance for travel applications at ground level. The large centre distance between the parallel gearbox shafts enable these units to be used in a central drive arrangement, e.g. when fitted with shaft ends on both sides. What else do they offer?

• Wide range of transmission ratios
• Cost-effective solutions with high efficiency
• Practical designs for a variety of travel applications
• 9 gearbox sizes

Our DRS wheel block system is a versatile travel wheel system and is perfectly integrated into our modular drive system. Eight finely graded sizes with load capacities of up to 40 tonnes per wheel provide the right wheel block for every application. And the large selection of travel wheels and special wheel designs enable them to be adapted to almost any travel rails and operating conditions. Cost-effective and ready to install. Further strengths:

• high performance range and maximum load capacity
• many travel wheel shapes as standard as well as customer-specific designs
• 4 variants for connection to the customer's superstructure
• high-quality housing with optimum protection of the travel wheels and bearings
• high rigidity
• direct connection of optional accessories
• laser alignment system for wheel blocks on multiple travel units.

Our Dedrive Compact STO frequency inverters offer outstanding performance and satisfy even the most demanding drive requirements with ease. They feature not only tried-and-tested reliability and functionality, but also:

• high overload capability
• simple operation
• control characteristics for travel and lifting applications independent of the load
• can already be used for 0.75 kW recommended motor shaft output
• highly cost-effective thanks to low wear on the drive system
• application modules are also available with Dedrive Compact STO

Our corner-bearing end carriages are versatile, modular rail-mounted travel units of torsionally rigid box-section design. They can be connected direct to load-bearing superstructures for cranes or crabs. Further benefits:

• precise single or double-girder design with up to four travel wheels
• can be configured for all load capacity ranges
• optimised design of the entire crane system
• convenient adjustment and maintenance
• save time for handling during assembly.

The DRC-DC radio control system is the ideal solution for optimum ergonomic operation of high-performance DC chain hoists. It offers much greater flexibility than cable-connected control systems and ensures that the operator can maintain a safe distance from the load at all times.

• Two sizes to control up to two (DRC-DC 6) or three axes (DRC-DC 10), respectively
• Strong, tough hand-held transmitter
• Reliable radio transmission thanks to frequency hopping
• Ergonomic design
• Fast installation and simple operation

Our DCL-Pro compact conductor line sets new standards for power supply arrangements for mobile equipment. It features innovative technology all along the line. The highly rugged enclosure profile has a low deadweight and its flexible configuration provides for a wide performance range.

The current collector system has been developed with absolute reliability in mind to ensure safe and reliable operation over a long service life. The patented connection arrangement with prepared modules makes installation much easier and cuts the time required for assembly.

• High profile section rigidity with a low deadweight
• Long service life thanks to optimised current collector trolley design
• Up to 200 A in continuous operation
• Fast installation thanks to pre-assembled connection system
• Compatible with DCL predecessor model

Our R round magnets offer outstanding performance when used as single units thanks to their compact dimensions and high load capacities. Our round magnets can be employed as RT spreader magnets for transporting large pieces of sheet and plate metal. Suspension at many points eliminates the sag that typically occurs in such applications.

• Load capacities up to 1, 400kg for safety factor of 2 (per magnet)
• Steel housing offering high permeability
• Single magnets with integrated rectifier, switch and suspension ring
• Spreader magnets available with separate electric equipment
• Spreader magnets can be operated in groups