Digital Stout

Ajman, United Arab Emirates

Product Specification
Product DescriptionCAT 3, Direct Burial Telephone Cables, 0.63MM Dia, Bare Solid Copper, Foam Skin PE, Filling with Jelly Compound, Screened with Co-polymer Coated Alu Tape, PE, Double Steel Tape, Black Weather Resistant PE
MOQTo be Advised

Technical Specification:
LED Cree, CRI > 80. Die casting Aluminium powder coating. Stainless Steel Bezel. T=6mm Tempered Glass. External Auto addressing DMX512 decoder available. Standard DMX Interface: Common +. Mounting Sleeve: POM Transparent glass or Diffused glass 10.5cm Stainless Steel Chamfered Bezel

Technical Specification12.5mm Ultra-thin Design Pb Free CE & ROHS Compatible LED - SMD2835 CRI: ?80 Color - 3000K / 4000K / 5000K / 6000K

Product DescriptionOpterna Fiber Optic 19 Unloaded Sliding Patch Panel has been designed to facilitate internal fiber management and also to maximize fiber density in 1U, 2U heights.Constructed from mild steel with a powder coated finish the panel is available in Black or Grey colours.

Product Description:Light and compact design. Easy and Quick die replacement. Supplied with standard 3/8 NPT female coupler. Supplied with set of hexagonal die sets, ranges from 10-1000 mm2
Brand Name:LIFTON Canada
Model No:LC-630H

Brief DescriptionExtra handset for the Audio Door Entry Kit , max 3, Additional audio internal unit with transformer

Product Description:Hydraulic puller fit to pull one rope in laying underground transmission cables and fibre optics wires. One hydraulic circuit lets to vary continuously the speed in both directions by operating one only control device.

Individual ScreenAluminium backed Mylar Tape is applied over each pair. All pairs are electrically isolated.
CablingAssembly is wrapped with Polyester Tape
Collective ScreenAluminium backed Mylar Tape
Inner SheathingFlame Retardant PVC
ArmourSingle layer SWA to BS EN 10257
Over sheathFlame Retardant PVC

Product Features:2 in 1 features, Wall bracket with predrilled hole, Garden Spike, Single high powered 3W LED, 50, 000 hour average lamp life, Cool running, No UV, Integral driver, Die-cast aluminium body, Toughened glass.

Product Description:This connector is suitable for joining cables in a test point as part of the lightning protection system. The base has a countersunk hole in the middle for securing the connector to the building surface. Fix using countersunk woodscrew 1 1/2"" No. 10 x No. 10 wall plug. .

Product Description:Air rods form an important part of the air termination network of a lightning protection system. All of our air rods are supplied with a locknut enabling the rod to be locked tight against the conductor.

Product Description:This Wallis 'B' bond is used for bonding aluminium and copper tapes to flat metal surfaces.

Product Description:These connectors are used to join aluminium and copper tapes together. They are a neat and practical jointing method without the need for tinning, riveting or wrapping the joint. Fix using countersunk woodscrew 1 1/2"" x No. 10 wall plug

Product Description:Metallic DC clips secure the flat tape conductor to the building surface. Fix using countersunk woodscrew 1 1/2"" x No. 10 and No. 10 wall plug

Product Description:These earth rods are designed for use where extremely high corrosion resistance and exceptionally long life are required. Solid copper earth rods are produced from solid copper bar and are internally threaded for jointing. When deep driving a solid copper earth rod the usual practice is to insert the rod into a bore hole and backfill with either Low-Resistance Earthing Compound or Bentonite;.

Product Description:The driving head protects the internal thread and the top of the solid copper earth rod from damage when being driven into the ground

Product Description:The phosphor bronze coupling dowel is used for joining solid copper earth rods together.;

Product Description:These clamps are used for joining earth rods to different sizes of stranded copper conductor. The clamps have a high resistance to corrosion and are mechanically strong to ensure a lasting connection.

Product Description:Double Plate Type for Vertical Stranded Cable.Maximum

Product Description:These Wallis four-way connectors are suitable for making cross, straight through or tee joints in flat tape. The base has a countersunk hole in the middle for securing the clamp to the building surface and the lid is fixed by means of four screws. Fix using countersunk woodscrew 1 1/2"" x No. 10 and No. 10 wall plug.

Product Description:Designed to join a range of tape sizes in a straight through position. In many applications the clamp enables tapes to be overlapped and secured by the two set screws.

Product Description:Wallis bare aluminium tapes are used on lightning protection system applications. The aluminium is annealed for ease of use and has radiused edges.

Product Description:Wallis PVC covered copper tapes are mainly used as down conductors on a building's structural lightning protection system. The copper is manufactured to BS EN 13601 and is annealed for ease of use. There is a choice of six standard PVC colours to match the most common building materials and provide an aesthetic finish to the external lightning protection system. All PVC coverings are UV stablished although some discolouration may occur over time.

Product Description:These clamps are used for joining earth rods to different sizes of copper tape. The clamps have a high resistance to corrosion and are mechanically strong to ensure a lasting connection

Product Description:Rigid and Stable Base Design for foot operation. Less operator fatigue. Widely used with crimper & cutter heads. Over loaf protection valve.
Brand Name:LIFTON Canada
Model No:LFP-215

Product Description:Placed at the entrance to guide the cable in manhole. Made of heavy duty steel construction. Maintenance free, water proofed, rubber sealed ball bearings.