Our Products
Metal Products
2 Products availableSheet Metal & Turned Components
2 Products availablePerforated Sheet
1 Products availableMetal & Metal Products
1 Products availableIron & Metal Alloys
1 Products availableMetal Sheets
1 Products availableAluminium Alloy 1100 has minimum of 99% purity with Low strength non-heat treatable and excellent corrosion resistance. Aluminium sheets of this alloy are easy to weld, braze and solder. Aluminium also has excellent thermal and electrical conductivity.
Applications of Aluminium Alloy 1100Aluminium Alloy 1100 can be used primarily for general sheet metal works where moderate strength is adequate and operations include lightly stressed panels, architectural flashings, chemical storage, processing equipment, kitchen utensils, and other sheet metal work. Below is a table of the standard sizes of plain aluminium alloy 1100 sheets we stock in our warehouses in Dubai & Sharjah.
This is an essentially 98% pure aluminium alloy with minor additions for strength. It is not harden able by heat treatment. Corrosion resistance, formability and welding characteristics are excellent. The high strength-to-weight ratio and raised anti-skid patterns, rust-free, hygienic and easy-to-clean, make these sheets ideal for multiple uses.
Applications of AA 3105-F Chequered PlatesThis product is typically used for floor covering, access ramps, step ladders, slip resistance surfaces, wall and column protection to prevent impact damage, commercial vehicles, refrigerated trucks, cold rooms, vans, busses, trailers, pickup trucks and general sheet metal works.
Table of commonly stocked sizesThere are two types of thickness in tread plates: Thickness of the plate without pattern and total thickness, incl. pattern. The two figures are written with a slash in between (e.g. 1.5/2.0)
Aluminium Alloy 3003 is a medium strength alloy with very good resistance to atmospheric corrosion and very good weldability as well as good cold formability. It has better mechanical properties, especially at elevated temperatures than the 1000 series alloys. All other characteristics viz appearance and applications are similar to AA 1100 stucco sheets. A stucco embossed finish is achieved by processing the natural mill finish material through embossing rollers. This provides a surface, which diffuses light reducing reflectivity and glare. It is used for applications on decorative effects, or to reduce surface reflectivity. As Aluminium is both a stable and durable material, it provides excellent service as a roofing or cladding without the need of any protective coating.
Applications of Aluminium Stucco Sheets Alloy 3003Embossed Aluminium sheet are widely used in refrigerator, solar heat reflectors, decorative aluminum products, lamps, bags, disinfection box, air conditioning, ventilation ducts, indoor & outdoor decoration, machinery and equipment housing and other industries. Embossed finish can enhance the thickness and strength of aluminum.
Perforated aluminum sheet is a sheet product that has been punched with a wide variety of hole sizes and patterns providing an aesthetic appeal. We import our sheets fully perforated at the mill which ensure unmatched flatness and uniformity which can't be replicated by local perforators.
Aluminum perforated sheet offers savings in weight, passage of light, liquid, sound and air, while providing a decorative or ornamental effect. Perforated Aluminum sheets are corrosive resistant and commonly used in interior and exterior design, HVAC, Noise Control, Sunscreens, Facades for buildings, Ceilings, Furnishings, Screening and Fencing
Aluminum Perforated sheets we stock are alloy AA1100 which is non magnetic, light weight, Easy to Weld, Cut, and Form
Table of commonly stocked sizesThe table below is the list of sizes of perfoated sheets we usually stock in our warehouse. All the sheets are with round hole, 60 staggered pattern, triangular pitch.
Perforated Sheet MetalWe offer a variety ofperforated sheet metal. Different metals, thickness and open area can dramatically change the strength to weight ratio.
Width | Length | Thickness | Hole Diameter | Pitch Center to Center |
---|---|---|---|---|
4' (1,219mm) | 8' (2,438mm) | 0.7mm | 3mm | 5mm |
4' (1,219mm) | 8' (2,438mm) | 1.0mm | 3mm | 5mm |
4' (1,219mm) | 8' (2,438mm) | 1.2mm | 4mm | 7mm |
4' (1,219mm) | 8' (2,438mm) | 1.2mm | 5mm | 10mm |
4' (1,219mm) | 8' (2,438mm) | 1.2mm | 6mm | 10mm |
4' (1,219mm) | 8' (2,438mm) | 1.2mm | 8mm | 12mm |
4' (1,219mm) | 8' (2,438mm) | 1.2mm | 10mm | 15mm |
4' (1,219mm) | 8' (2,438mm) | 1.5mm | 6mm | 10mm |
4' (1,219mm) | 8' (2,438mm) | 1.5mm | 8mm | 12mm |
4' (1,219mm) | 8' (2,438mm) | 1.5mm | 10mm | 15mm |
4' (1,219mm) | 8' (2,438mm) | 1.5mm | 12mm | 18mm |
4' (1,219mm) | 8' (2,438mm) | 2.0mm | 3mm | 5mm |
4' (1,219mm) | 8' (2,438mm) | 2.0mm | 6mm | 10mm |
4' (1,219mm) | 8' (2,438mm) | 2.0mm | 8mm | 12mm |
4' (1,219mm) | 8' (2,438mm) | 2.0mm | 10mm | 15mm |
4' (1,219mm) | 8' (2,438mm) | 2.0mm | 15mm | 21mm |
4' (1,219mm) | 8' (2,438mm) | 2.0mm | 20mm | 30mm |
4' (1,219mm) | 8' (2,438mm) | 3.0mm | 6mm | 10mm |
4' (1,219mm) | 8' (2,438mm) | 3.0mm | 10mm | 15mm |
Perforated galvanized iron Sheet is a sheet product that has been punched with a wide variety of hole sizes and patterns providing an aesthetic appeal. We import our sheets fully perforated at the mill which ensures unmatched flatness and uniformity which can't be replicated by local perforators.
Perforated galvanized iron sheet offers savings in weight, passage of light, liquid, sound and air, while providing a decorative or ornamental effect. Perforated Galvanized Iron sheets are corrosive resistant and commonly used in interior and exterior design, HVAC, Noise Control, Sunscreens, Facades for buildings, Ceilings, Furnishings, Screening and Fencing
Perforated galvanized iron sheets we stock are hot dipped in Zinc which provides better corrosion resistance compared to electro-galvanized sheets
Table of commonly stocked sizesThe table below is the list of sizes of perfoated sheets we usually stock in our warehouse. All the sheets are with round hole, 60 staggered pattern, triangular pitch.
Perforated Sheet MetalWe offer a variety ofperforated sheet metal. Different metals, thickness and open area can dramatically change the strength to weight ratio.
Width | Length | Thickness | Hole Diameter | Pitch Center to Center |
---|---|---|---|---|
4' (1,219mm) | 8' (2,438mm) | 0.5mm | 3mm | 5mm |
4' (1,219mm) | 8' (2,438mm) | 0.7mm | 3mm | 5mm |
4' (1,219mm) | 8' (2,438mm) | 0.7mm | 5mm | 8mm |
4' (1,219mm) | 8' (2,438mm) | 0.9mm | 3mm | 5mm |
4' (1,219mm) | 8' (2,438mm) | 0.9mm | 5mm | 8mm |
4' (1,219mm) | 8' (2,438mm) | 1.2mm | 3mm | 5mm |
4' (1,219mm) | 8' (2,438mm) | 1.2mm | 6mm | 10mm |
4' (1,219mm) | 8' (2,438mm) | 1.2mm | 8mm | 12mm |
4' (1,219mm) | 8' (2,438mm) | 1.2mm | 10mm | 15mm |
4' (1,219mm) | 8' (2,438mm) | 1.5mm | 4mm | 7mm |
4' (1,219mm) | 8' (2,438mm) | 1.5mm | 6mm | 10mm |
4' (1,219mm) | 8' (2,438mm) | 1.5mm | 8mm | 12mm |
4' (1,219mm) | 8' (2,438mm) | 1.5mm | 10mm | 15mm |
4' (1,219mm) | 8' (2,438mm) | 1.5mm | 12mm | 18mm |
4' (1,219mm) | 8' (2,438mm) | 1.5mm | 15mm | 21mm |
4' (1,219mm) | 8' (2,438mm) | 1.5mm | 20mm | 30mm |
4' (1,219mm) | 8' (2,438mm) | 2.0mm | 3mm | 5mm |
4' (1,219mm) | 8' (2,438mm) | 2.0mm | 5mm | 10mm |
4' (1,219mm) | 8' (2,438mm) | 2.0mm | 8mm | 12mm |
4' (1,219mm) | 8' (2,438mm) | 2.0mm | 10mm | 15mm |
4' (1,219mm) | 8' (2,438mm) | 3.0mm | 5mm | 10mm |
4' (1,219mm) | 8' (2,438mm) | 3.0mm | 10mm | 15mm |
Perforated Stainless Steel Sheet is a sheet product that has been punched with a wide variety of hole sizes and patterns providing an aesthetic appeal. We import our sheets fully perforated at the mill which ensures unmatched flatness and uniformity which can't be replicated by local perforators.
Stainless Steel perforated sheet offers savings in weight, passage of light, liquid, sound and air, while providing a decorative or ornamental effect. Perforated Stainless Steel sheets are corrosive resistant and commonly used in interior and exterior design, HVAC, Noise Control, Sunscreens, Facades for buildings, Ceilings, Furnishings, Screening and Fencing
Stainless Steel Perforated sheets we stock are grade 304 in 2B Mill Finish, Not Polished
Table of commonly stocked sizesThe table below is the list of sizes of perfoated sheets we usually stock in our warehouse. All the sheets are with round hole, 60 staggered pattern, triangular pitch.
.
Perforated Sheet MetalWe offer a variety ofperforated sheet metal. Different metals, thickness and open area can dramatically change the strength to weight ratio.
Width | Length | Thickness | Hole Diameter | Pitch Center to Center |
---|---|---|---|---|
3.28' (1,000mm) | 6.56' (2,000mm) | 0.7mm | 1mm | 2mm |
4' (1,219mm) | 8' (2,438mm) | 0.7mm | 2mm | 4mm |
4' (1,219mm) | 8' (2,438mm) | 0.7mm | 3mm | 5mm |
4' (1,219mm) | 8' (2,438mm) | 0.8mm | 3mm | 5mm |
4' (1,219mm) | 8' (2,438mm) | 1.0mm | 3mm | 5mm |
4' (1,219mm) | 8' (2,438mm) | 1.0mm | 4mm | 7mm |
4' (1,219mm) | 8' (2,438mm) | 1.0mm | 6mm | 10mm |
4' (1,219mm) | 8' (2,438mm) | 1.2mm | 5mm | 8mm |
4' (1,219mm) | 8' (2,438mm) | 1.2mm | 8mm | 12mm |
4' (1,219mm) | 8' (2,438mm) | 1.2mm | 10mm | 15mm |
4' (1,219mm) | 8' (2,438mm) | 1.5mm | 6mm | 10mm |
4' (1,219mm) | 8' (2,438mm) | 1.5mm | 8mm | 12mm |
4' (1,219mm) | 8' (2,438mm) | 1.5mm | 10mm | 15mm |
4' (1,219mm) | 8' (2,438mm) | 1.5mm | 12mm | 18mm |
4' (1,219mm) | 8' (2,438mm) | 1.5mm | 15mm | 21mm |
4' (1,219mm) | 8' (2,438mm) | 1.5mm | 20mm | 30mm |
4' (1,219mm) | 8' (2,438mm) | 2.0mm | 3mm | 5mm |
4' (1,219mm) | 8' (2,438mm) | 2.0mm | 6mm | 10mm |
4' (1,219mm) | 8' (2,438mm) | 2.0mm | 8mm | 12mm |
4' (1,219mm) | 8' (2,438mm) | 2.0mm | 10mm | 15mm |
4' (1,219mm) | 8' (2,438mm) | 3.0mm | 6mm | 10mm |
4' (1,219mm) | 8' (2,438mm) | 3.0mm | 10mm | 15mm |
This specification defines the properties and characteristics of marine grade aluminium alloy, delivered as sheets or plates by renowned european mills such as Alcoa Marine, Hydro & Elval.
Performance is as important in the yard as it is on the water. You want high performance, user-friendly materials that give you the freedom to express your vision. Structural efficiency. Unimpeachable quality. And genuine versatility. That's why so many of today's best performing vessels, large and small, are constructed from marine grade aluminium. The 5083 alloy provides the exceptional strength, workability and corrosion resistance that marine applications require, aluminium has been the material of choice for forward-looking designers wherever durability, economy of operation and construction, responsiveness or sheer speed are priorities. We stock Marine Grade Aluminium Alloy 5083 in the UAE.
We stock marine gradealuminium alloy 5083in the UAE.
Temperature | Proof Stress 0.2% (MPa) | Tensile Strength (MPa) | Elongation Min. % | Bend Radius 90° | Hardness HBW |
---|---|---|---|---|---|
H111 | 100 | 240 | 17 | 2.5 x t | 65 |
H116 / H321 | 195 | 275 | 8 | 3.5 x t | 81 |
Aluminium exhibits moderate strength and very good corrosion resistance which makes it an ideal metal to use for jacketing on mechanical insulation systems that are used on cold and hot pipes, tanks, ducts, vessels and equipment to conserve energy, prevent surface condensation, prevent contact burns and more. In most outdoor applications and some indoor locations, these systems use an outer protective metal jacketing to provide protection against UV, physical damage and water shedding.
Types of Moisture Barriers on Aluminium SheetThere are two types of moisture barriers used on metal jacketing in mechanical insulation systems; polykraft and polysurlyn that we provide.
Polykraft type moisture barrierPolykraft is a layer of kraft paper laminated to a single thin layer of polyethylene film. Polykraft consists of one layer polyethylene film with a protective layer of kraft paper. The moisture barrier is factory applied by attaching the jacketing by continuous lamination to the full width of the metal. Aluminium Jacketing equipped with Poly Kraft (Moisture Barrier) with anti corrosion and anti-galvanic properties.
Polysurlyn type moisture barrierPolysurlyn moisture barrier (PSMB) is a thick three layer film that is applied by laminating the film to the aluminium sheet by a process of heat and pressure. Polysurlyn Moisture Retarder provides an excellent resistance to moisture and has excellent abrasion resistance during installation. Polysurlyn is a high performance solution as it has no pinholes, is a multilayer film, has a very low water vapour transmission rate and a very low water absorption. Additionally, it is tough, scratch resistant and durable