Mud & Silt Remover, Cleaning Chemicals (mud & Silt Dispersant)

Min. Order (MOQ) 1 Gallon
Appearance Hazy, water white liquid
pH 9.00-10.00
Specific Gravity 0.995 - 1.00
Flash Point (PMCC) Greater than 200°F (93°C)
Viscosity (Brookfield LV2) @ 30 rpm, 2396 SUS @ 100°F

description:-it is a odorless colorless hazy water white polmerised viscous liquid for removal of sediments, silt and mud from ballast tank . its polymerization dual effect mechanism help to prevent hard deposition of mud layer on metal surface as well as keeps mud particle in loose condition which causes more labor to clean . application: polyelectrolyte conditioner is highly economical, non toxic, non polluting chemical its lower concentration effectiveness with water keeps it in very economical grade materials class. link1. proven cost effective2. ready-to-use3. concentrated formula4. very low usage rates as 5 ppm5. safe, aqueous product6. dosing equipment available field for use:1. ballast tanks2. double bottom tanks3. floating dry-docks4. manual tank cleaning5. cooling water systems application:-rxsol-23-2900 may be fed full strength, or diluted with clean water, depending upon the application.rxsol-23-2900 works best when injected into ballast piping or the ballast pump discharge during ballasting. rx marine offers either automatic or semi-automatic injection systems. each system consists of a 50 or 100 gallon supply tank, with high pressure injection pumpsconnected to a rx marine international. special 316 ss injection nozzles are also supplied to assist in dispersing and mixing the chemical in the ballast pipes. installation of these systems is straightforward. all that is required is to bolt or weld the tank in place, run tubing from the injection point, and provide shipboard power to the controller. operation of these units is also easy. standard systems need only to be turned on when the ballasting procedure begins, and off when the ballasting is finished. automatic systems are designed to turn themselves on and off as needed, and require no operator assistance, except to check the holding tank level.applications such as tank cleaning, dry-docks and once-through cooling systems may require other types of injection systems.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Ask Latest Price & Details

Waterless Hand Cleaner

Min. Order (MOQ) 1 Gallon
Brand Name RXSOL
APPEARANCE White gel / paste (at 20-30°C)
Density In g/cm3 at 20°C: 1.0
FLASH POINT Non Flammable
SOLUBILITY Infinite in water
METAL No known effect
RUBBER No known effect

We are offering waterless hand cleaner. Rxsol-16-1001 waterless hand cleaner is a white milky gel containing natural ingredients , moisturizers , surfactants powerful dispersing agent, perfume, cosmetic cleaner etc. This is a better substitute of petroleum products & caustic based detergent which drain the body oil. It removes even the most stubborn grease and grime thoroughly yet gently. Multi-purpose heavy duty cleaning agent. Fields of application : cleaning after working in metal industry , oil fields , chemical ship maintenance, garages, machine shops , as well as in manufacture of engines & transmission etc. Directions for use and dose rates: massaged on to the soiled greased skin without the use of water. The skin should then either rinse with clean water or wiped thoroughly with towel tissue paper. Because of the mildness of this product to skin, it may be used for cleaning all areas of the body, if required rxsol-16-1001-5 easily removes the dirt no matter how deeply it is buried in the skin. Normal 2-5 grams is sufficient to apply, but depends on degree of contamination and cleaning required. In hard cleaning repetition may require. Features, benefits and applications: 1. Enriched with moisturizers. And highly effective general purpose degreaser cleaner 2. Pleasant citrus jasmine orange smell. 3. Easier to disperse than many other gel cleaners 4. It is non-toxic which makes handling easy. First aid measures harmful, if ingested, induce vomiting and seek medical attention. Condition to avoid: heat, direct sun rays. Materials to avoid: do not subject to acidic alkaline moisture oxidizing agent etc.

Additional Information:

Packaging Details : 1 kg, 5 kg, 1 kg , 5 kg

Delivery Time : Any time

View Complete Details

Ask Latest Price & Details

Sea Clean Plus Chemical, Cleaning Chemical

Min. Order (MOQ) 1 Gallon
APPEARANCE: Clear pale yellow liquid.
DENSITY in g/cm3 at 15°C: 0.8
FLASH POINT (PMCC) °C: Above 61
pH, conc. at 20 °C: N/A
Metal No known effect
Rubber No known effect
Synthetic rubber: No known effect

Product descriptionseaclean plus is a modern low-toxic, biodegradable solvent based product. It meets imos requirements regarding safety and pollution hazards of chemicals. Applicationsthis product is excellent as a tank cleaner and degreaser. Directions for use and dose rates direct injection method - for tank cleaning machines the dose rate should be between 0.1-0.2% i.e. 1-2 liters per ton wash water. Recirculation method - for tank cleaning machines it is advised to use a solution of 0.1-0.2% i.e. 1-2 liters per ton wash water mixed in the tank to be cleaned. The washing solution is usually 5-10% of the tank capacity. Dose rates and results will vary depending on contamination, the temperature of the cleaning solution, and number of tanks to be cleaned with the solution. Best results are obtained when water is heated to a temperature between 65-80c. Spot cleaningfeatures, benefits and applications1. Highly concentrated tank cleaner with quick penetration and powerful emulsifying properties2. The emulsifying agents in this product are biological degradable3. Does not contain nonyl phenol ethoxylates or other estrogenic compounds4. Versatile, can be used for a wide range of applications. 5. Easy to use by any conventional means6. Can be used for cleaning and gas-freeing of double bottom, deep, and fuel oil tanks at sea7. Can also be used for cleaning and gas-freeing of crude and refined mineral oil cargo tanks8. Can be used for degreasing and cleaning of bilge spaces and engine rooms9. Easy rinse off, leaving clean and oil-free surfaces10. Safe to use on most metal surfaces, painted surfaces and tank coatings11. Economical, very low dosage rates12. Imo approved and listed in annex 10 of the mepc.2 circular.

Additional Information:

Packaging Details : 25 Ltr, 210 Ltr

Delivery Time : Any Time

View Complete Details

Ask Latest Price & Details

Chem Break, Cleaning Chemicals

Min. Order (MOQ) 1 Gallon
Appearance Clear (Raw material depended color of the effectively will, however not be impaired.)
Density In g/cm3 at 15°C: 0.93
Flash Point (PMCC)°C: Above 66
Metal No known effect
Rubber Do not use with natural rubber compounds
Synthetic Rubber May Swell

Chem break rx org-rxsol-20-2006 (sludge break )for engine room & cargo tank cleanerproduct description:- rxsol-20-2006 is an all purpose degreaser emulsifiers, it is an excellent blend of powerful solvent base and emulsifying inorganic products .specially designed for engine room and cargo tank cleaning .main feature of rxsol-20-2006 is, it finally dissociate slop emulsion to separate oil and water .this provide us with ability to dispose of waste solution as per marpol & imo rules and regulation . Dosage:- dose rate and results will vary depending on amount of contamination . For light contamination dilution with water up to 1:20 is recommended where as medium contamination dilution with petro solvent , and for heavy contamination neat rxsol-20-2006 is suggested to use. Procedure of use:-rxsol-20-2006 is recommended for local cleaning & degreasing of engine rooms, bilges & tank tops. It may be applied by brush, spray, immersion, soaking, or any other conventional means.rxsol-20-2006 is used neat. Allow a residence time of at least 20- 45 minutes where possible, to ensure good penetration & emulsification. Finally wash the system with hot water & high pressure. The emulsion residue after cleaning must be allowed to separate in a holding tank for at least 3-5 hours before passing through an oily water separator. Tank cleaning after mineral oils lube oils slope-black oil1) fill the tank with 1-35 liters per ton wash water. Best results are obtained when water is heated to a temperature between 65c & 80c then stripped constantly and transferred to a holding tank for separation. The time for this will vary depending on amount of rxsol-20-2006 used & nature of oil being cleaned.generally, 12 hours should be sufficient before the water phase can be removed. 2) direct cleaning. Spray directly rxsol-20-2006 on tank surfaces to be cleaned, left for at least 30 minutes. Finally wash with hydro gating (high pressure) machine. Hot water between 50c & 80c recommended.

Additional Information:

Packaging Details : 20 Ltr 25 Ltr

Delivery Time : Any Time

View Complete Details

Ask Latest Price & Details

CTC Volc, Cleaning Chemicals

Min. Order (MOQ) 1 Gallon

we offer ctc volc, cleaning chemicals.description:-a very strong cleaner, which can be used to soften up remove baked on drying oils and also used after animal and vegetable oils, fish oils, tall oils, tung oil etc. it is low toxic product with an exceptional solvency power on soil & oily matter . it is free from hydrocarbon solvents , biodegradable and minimizes the extreme hazards to personnel in handling materials. using-procedure:-first of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using rxsol-20-2028 is by direct injection followed by recirculation washing, using tank cleaning machines.spraying method:-using ctc as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60oc for at least 3 hours, checking that there is no foam remaining in the final stages. inspects tanks(s) and if desired result has been achieved fresh water rinse and dry. **make sure to take all safety precautions are followed when handling spraying ctc**injection method:- not applicable. re- circulation method:- fill tank with fresh water and heat up to warm 50oc . if a drop line is available on the tank line system, then start to circulate the water and add the required amount of caustic flakes and ctc to make a 2.5% solution. a stronger solution can be made, but be advised that too much caustic and too high temperature will result in white powder all over the tank. under normal circumstances, between 2.5% and 4.5% will be sufficient strength. if there is no drop line, then lower butterworth hoses into the tank from thepump stack header without machines attached and circulate through these hoses while you fill the solution material.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Ask Latest Price & Details

New Org, Cleaning Chemicals

Min. Order (MOQ) 1 Gallon
Color Light brown liquid
DENSITY In g/cm3 at 15°C: 0.9
FLASH POINT Above 70 °C

Product description:- rxsol-20-2020 is an extremely effective liquid blend of concentrated emulsifier with penetrating agents , mild abrasives and wetting agents which makes this an excellent liquid scouring cleansers for cleaning and degreasing of double bottom, deep tanks etc which is used for fuel oils it can also be used for boilers , marine diesel engine cooling water system and for local cleaning and degreasing of engine rooms on deck. directions for use and dose rates: rxsol-20-2020 is specially formulated for cleaning double bottom, deep and wing tanks etc, used for fuel oils. It can also be used for local cleaning and degreasing of engine rooms and on deck. Soak method for heavy soil put parts into undiluted rxsol-20-2020, for general soiling use a solution of 10-30% rxsol-20-2020 water. Parts should be soaked for at least 30 minutes before washing off with water. Spraying method use neat rxsol-20-2020 over all soiled areas. Allow 10-20 minutes for reaction , then rinse with high pressure water hose., scrubbing will assist the cleaning operation for stubborn deposits. Rock and roll method recommended time to clean and gas-free under normal circumstances would be 3-6 days , for cleaning of double bottom tanks at sea.

Additional Information:

Packaging Details : 20 Ltr, 210 Ltr

Delivery Time : Any Time

View Complete Details

Ask Latest Price & Details

Dual Hd Cleaner, Cleaning Chemicals

Min. Order (MOQ) 1 Gallon

Introduction:-heavy duty blend of liquid cleaner, organic synthetic detergent and emulsifying solvents, which makes economical to use and highly effective on heavy deposition of many soils . A very strong cleaner, which can be used to soften up remove baked on drying oils and also used after animal and vegetable oils, fish oils, tall oils, tung oil etc. It is low toxic product with an exceptional solvency power on soil & oily matter. It is free from hydrocarbon solvents, biodegradable and minimizes the extreme hazards to personnel in handling materials. Fields of application:-highly effective cleaner for cleaning of tanks, bilges, tank tops, animal oil, vegetable oil, and grime are rapidly emulsified with this chemicals. In factories for cleaning machinery , manufactured parts, engines, motors, conveyors, floors, and floor plates, machinery spaces etc. By contractors for cleaning road building machinery, scrapers, mixers, bulldozers, cranes, trucks, equipment, etc. Dirt oil, grease, animal oil, vegetable oil, and grime are rapidly emulsified and rinsed away from aluminum, brass, steel, cast, iron, chrome plate, porcelain, glass, painted surfaces, stone, cement and wood. Application:materials consumption and using procedure is completely depends up on nature of materials going to cleanusing procedure:first of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using rxsol 20 2012 is by direct injection followed by recirculation washing, using tank cleaning machines. Spraying method: -using rxsol 20 2012 as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60oc for at least 3 hours, checking that there is no foam remaining in the final stages. Inspects tanks(s) and if desired result has been achieved fresh water rinse and dry.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any time

View Complete Details

Ask Latest Price & Details

Aqua Break Rx, Cleaning Chemicals

Min. Order (MOQ) 1 Gallon
Appearance Pale yellow clear liquid
Density In g/cm3 at 15°C: 1.0 +/- 0.05
Metal Rubber May attack Zinc at concentrated solutions No known effect
pH Neat 12

Product introduction: rxsol-16-3003 mixture of emulsifier, new technology surfactants (with high solvency and emulsification effect), corrosion inhibitors, rust preventive. Due to free from caustic and hydrocarbon very gentle on hands & ideal for cleaning walls wood works, metals and all areas. Acts as superior quality cleanerdegreaser. fields:rxsol-16-3003 containing corrosion inhibitors to prevents the corrosion of metals such as aluminum, copper, brass and tin. Rxsol-16-3003 is designed to clean animal vegetables oils, fats, hydrocarbon removes dirt, link , carbonized grease, oil, heavy oils etc. Specialized for all types of cleaning and degreasing. May be applied by brush, hand spray or used in ultrasonic cleaning tanks, immersion soak tanks and high and low pressure spray appliances. May be used neat or diluted by up to 50 parts of water according to the amount and type of soil to be removed. Tank cleaning: (cargo tank cleaning after mineral, animal, vegetable and fish oil, coal) method of application and doses: 1st of all by stripping suction removes all possible oil (greasy materials).to prevents evaporation of lighter fraction oil flush the system with cold water. May be brushed on, sprayed (hand spraydirect injection) recalculate the system with rxsol-16-3003 solution. 1. Cleaning with washing machines. Dose rate: 0.3-5 ltr per ton wash water (0.03-0.5%).

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Ask Latest Price & Details

Oxygen Scavenger Plus, Cleaning Chemical

Min. Order (MOQ) 1 Gallon
Appearance LIQUID
Color LIGHT YELLOW
pH 10.5

Oxygen scavenger plus(rxsol-50-5007)oxygen scavenger plus is a catalyzed liquid solution of hydrazine and diethyl hydroxylamine (deha). Its volatile properties ensure distribution throughout the boiler and condensate system, and hence protects against oxygen corrosion in all parts of the system. The product also provides the required conditions for the establishment of a passivating layer of magnetite on all inner surfaces. Rxsol-50-5007 is a low toxicity product, suitable for high, medium and low pressure boiler systems. directions for use:-this product is formulated for use in conjunction. Oxygen scavenger plus can be used in any boiler system, and in conjunction with mechanical desecration systems. Removal of dissolved oxygen is vital for prevention of corrosion and especially pitting corrosion in boilers. When dosed into a boiler system, oxygen scavenger plus will react with dissolved oxygen and form non corrosive compounds. The product is volatile, and left over product from oxygen scavenging in the pre-boiler section will evaporate and assist protection of the steam and condensate system. No solid materials are produced when using oxygen scavenger plus. dosing methodrx marine international recommends continuously into the boiler feed line and boiler water treatment dosing unit. Dosing should be controlled so that the deha residual in the condensate is between 0.08-0, 30 ppm. The consumption will depend on feed water temperature and the amount of water fed into the boiler. For more information about initial dosage and dose rate please consult your nearest customer centre. test result condensate ppm deha 0.00 - 0.08 0.08 - 0.30 0.30 +increase dose 25% maintain dose decrease dose 25% sampling and testing.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any tIme

View Complete Details

Ask Latest Price & Details

Dual Purpose Plus, Cleaning Chemicals

Min. Order (MOQ) 1 Gallon
Appearance Dark Brown Liquid
Brand Name RXSOL
Density In g/cm3 at 15°C: 0.9
Metal No Known Effect
Rubber may Swell
Synthetic May swell
Flash Point (PMCC)°C: Above 61

We are offering dual purpose plus, cleaning chemicals. Product description :- dual purpose plus is a concentrated combustion improver for heavy fuel oils. It also has fuel conditioning properties. produces properties:-the catalysts in dual purpose plus react with heavy fuel particles during combustion. The fuel ignition temperature is reduced, resulting in increased combustion efficiency with less carbon left to form smoke and soot. Engine and exhaust system are kept cleaner with longer service life and less maintenance .anti-polymerization agents inhibit sludge formation, while dispersants stabilize the fuel. This results in a cleaner fuel system and better fuel flow, giving improved fuel atomization and greater combustion efficiency. Sulphuric acid corrosion caused by condensing exhaust gases may be seen in any of the cooler parts of the boiler or engine system. Typical problem areas are cylinder liners (clover-leaf corrosion), valve stems and funnel uptakes. Dual purpose plus catalytically inhibits the formation of acid gases. This reduces the amount of acid present, thereby reducing acid corrosion. Directions for use and dose rates:-dual purpose plus is completely oil-soluble and should be added via a metering pump into the suction side of the booster pump. Alternatively, it can be added into the settling tank. If so, the dose rate should be increased by 10%. As a general guide, the average dosage should be 1:4000. Alterations can then be made according to operating experience and results obtained. Where fuel analysis for micro carbon residue, (mcr) is available. features, benefits and applications:-1. Improves combustion. 2. Reduces carbonash deposits. 3. Limits soot formation and smoke emissions. 4. Overall improvement in fuel combustion and economy. 5. Minimizes cold-end corrosion of exhaust trucking, uptakes, cylinder liners, valve stems, etc.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any time

View Complete Details

Ask Latest Price & Details

Gamabreak, Cleaning Chemicals

Min. Order (MOQ) 1 Gallon
Appearance Yellow Liquid
Brand Name RXSOL
DENSITY in g/cm3 at 15°C: 0.9
FLASH POINT (PMCC) °C: Above 61
Metal no Known Effect
Rubber May Swell
Synthetic rubber may Swell

We are offering Gamabreak, Cleaning Chemicals.Product DescriptionGamabreak rapidly breaks water-in-oil emulsions in all grades of fuel. It assists water removal in the settling tank and fuel centrifuges. Product PropertiesGamabreak breaks water-in-oil emulsions by lowering the surface tension between the two phases. It is insoluble in water and remains effective even after the water has been removed. Powerful dispersants combat existing sludge formations while homogenizing the fuel to prevent new sludge from being formed. Centrifugal separation of catalyst fines is improved, reducing abrasion damage. The homogenizing action of Gamabreak keeps heavy fuel particles in suspension, therefore fuel filters block less frequently, tanks and lines remain cleaner, and in general, fuel systems maintenance is minimized. Consequently, a greater proportion of supplied fuel is available for combustion. Direction for Use and Dose RatesDose into the bunker tank prior to, or during bunkering. Allow the product to mix well with the fuel. If fuel analysis is available, the dosage should be based on the water content, as per the following table. Features, Benefits and Applications:-1. Rapidly breaks water-in-oil emulsions2. Improves separator efficiency3. Prevents sludge formation in tanks and lines.

Additional Information:

Packaging Details : 25 Ltr

Delivery Time : Any time

View Complete Details

Ask Latest Price & Details

Dieselite, Cleaning Chemicals

Min. Order (MOQ) 1 Gallon
Appearance Dark Brown Liquid
Brand Name Rxsol
DENSITY in g/cm3 at 15°C: 0.9
FLASH POINT (PMCC) °C: 61
Metal No Known Effect
Rubber may Swell
Synthetic Rubber May Swell

We are offering dieselite, cleaning chemicals. Dieselite is a multi-functional fuel treatment containing combustion catalysts and ash modifiers. It is intended for use in diesel engines and boilers burning residual fuels. product propertiescarbon residue formation during combustion is inhibited by catalysts that lower the ignition temperature of heavy asphaltenic particles. The combustion time is consequently increased, leading to a reduction of tar deposits and carbonaceous fire scale. Ash modifiers combine with fuel combustion ash to raise the sinter and melting points of the ash above the engine or boiler normal operating temperatures. High temperature corrosion is minimized, reducing maintenance and extending service life. The majority of ash formed is ejected with the exhaust gases in a fine, solid state, and any ash remaining in the exhaust system is easily removed by light brushing. The conversion of fuel sulphur to potentially corrosive sulphur trioxide gas is also inhibited. Sulphur trioxide reacts with condensed steam in the exhaust trucking, funnel uptakes and other cooler zones to form sulphuric acid. Dieselite is a wide spectrum additive intended for continuous use. directions for use and dose ratesfor best results, dieselite should be dosed automatically using a metering pump to dose into the fuel feed line as near to the injector or burner pump as possible. Where micro carbon residue (mcr) or vanadiumsodium analysis is available, use the following table: features, benefits and applications1) reduces smoke, soot and carbon deposits2) raises the melting point of sodium vanadium fuel ash3) to reduce high temperature corrosion and ash deposits4) cold-end corrosion reduced by inhibiting acid flue gas5) extends service life of engine components.

Additional Information:

Packaging Details : 25 Ltr

Delivery Time : Any Time

View Complete Details

Ask Latest Price & Details

Soot Remover (Powder)

Min. Order (MOQ) 1 Gallon
Brand Name RXSOL
APPEARANCE Blue green powder
DENSITY in g/cm3 at 15 °C: 1.2-1.4
FLASH POINT (PMCC) °C: Not applicable
Metal If moist, may attack mild steel, iron and aluminum
Rubber no Known Effect

Product DescriptionSoot Remover is a dry powder compound formulated for safe removal of soot and deposits from boilers and diesel engine exhaust systems. Product PropertiesIf deposits are allowed to form on heat exchangers, the loss of efficiency can be directly related to extra fuel consumption. A 1 mm deposit is approximately equivalent to a 10% efficiency loss; a 3 mm deposit can reduce efficiency by up to 50%. The normal ignition temperature of soot is around 600C. This means that it is burned only in the hottest parts of the boiler or diesel exhaust systems. Due to the catalytic action of Soot Remover, the ignition temperature of the sootdeposit is reduced to less than 280C. The carbon deposits are thus ignited, leaving an easily removed ash. The use of Soot Remover not only provides greater fuel efficiency, but also prevents acid formation in areas where severe corrosion could result in expensive damage, i.e. heat exchangers, super heaters, economizers, exhaust pathsstacks.`Directions for Use and Dose RatesSoot Remover should be introduced to the boiler through a suitable port, preferably with a blower, ensuring that the powder is spread through the flame path towards the back of the combustion chamber. For Diesel engines, inject Soot Remover directly into the exhaust system upstream of the area to be treated. Features, Benefits and Applications:-1) Reduces soot and slag deposits2) Reduces cold-end corrosion3) Improves heat transfer4) Increases boiler efficiency5) Assists soot blowing

Additional Information:

Packaging Details : 25 Ltr

Delivery Time : Any Time

View Complete Details

Ask Latest Price & Details

Valuecare, Cleaning Chemicals

Min. Order (MOQ) 1 Gallon
Brand Name RXSOL
APPEARANCE: Pale colored liquid
DENSITY in g/cm3 at 15°C: 0.9
FLASH POINT (PMCC) °C: Above 61
Metal No known effect
Rubber May Swell
Synthetic Rubber May Swell

Product description:-rxsol valvecare is specifically intended for treatment and reduction of corrosive deposits formed on exhaust valve seats and turbocharger components. Rxsol valvecare physically modifies fuel ash, raising the sinter and melting points of the ash above the normal engine operating temperatures. Modified ash particles are solid, small and non-adhesive and are ejected with the exhaust gas stream. Valve seatings remain intact as ash deposits on valve seats are reduced. Guttering is minimized and valve cone and seat lives are extended, allowing for greater time between overhauls. Turbocharger and exhaust system fouling is controlled as the ash particles in the gas stream are less adhesive. Exhaust systems remain cleaner and any ash that is formed is friable and easily removed by conventional methods such as brushing. Another advantage found with rxsol valvecare is acid reduction. Vanadium in the fuel has a catalytic action, increasing the conversion from sulphur dioxide to sulphur trioxide during combustion. The sulphur trioxide then reacts with steam in the exhaust system, increasing the dew point to form sulphuric acid. Rxsol valvecare keeps the complex vanadium and sodium ash compounds in a solid, non-molten state, inhibiting fused salt corrosion. directions for use and dose rates:- . Rxsol valve care should be dosed either directly into the service. Tank or by automatic metering into the suction side of the. Booster pumps. Typical dose rates vary between 1:1000. And 1:5000 depending on the nature and severity of the. Problem. Use the table below for optimum dosage.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Ask Latest Price & Details

Burnaid, Cleaning Chemicals

Min. Order (MOQ) 1 Gallon
Brand Name RXSOL
APPEARANCE: Clear, pale yellow liquid
DENSITY in g/cm3 at 15°C: 0.9
FLASH POINT (PMCC) °C: Above 61
Metal No known effect
Rubber May Swell
Synthetic rubber: May Swell

We are offering burnaid, cleaning chemicals. Burnaid is a concentrated organic combustion improver. It contains no metals and can be used in diesel engines and boilers. product propertiesthe organic compounds in burnaid promote improved combustion by reacting with fuel particles, thus lowering ignition temperatures. The result is less carbon deposits, soot and smoke. Engine and boiler combustion surfaces are kept cleaner. Sludge formation is inhibited through the action of anti-polymerization agents. Fuel stability is improved through the action of solvents and dispersants. The results are improved combustion efficiency and fuel atomization. directions for use and dose ratesburnaid is completely oil soluble. The initial dosage rate is one liter to five tons of fuel. Actual dosage rates will be dependent on fuel quality and operating experience. Burnaid should be added via a metering pump. If no metering pump is available, use the suction manometer on the transfer pump as the dosage point. For diesel engines and boilers, burnaid should be dosed during transfer from storage to the settling tank. Where fuel analysis for micro carbon residue (mcr) is available, or where ccai values are known, dose according to the following table: features, benefits and applications1) improves combustion2) reduces carbon deposits3) limits soot formation4) limits smoke emissions5) reduces corrosion in tanks and fuel lines6) conditions sludge in fuel7) improves fuel stability8) contains no metals9) reduces the demand for excess air in boilers10) improves boiler efficiency.

Additional Information:

Packaging Details : 25 Ltr, 210 Ltr

Delivery Time : Any Time

View Complete Details

Ask Latest Price & Details

Dubi Chem Marine International Est
FUJAIRAH, UAE, United Arab Emirates

Cleaning Chemicals