Ebcom Limited

SHARJAH, United Arab Emirates

Hot rolled coil is rolled on a hot strip mill from slabs. It can be found on the market in coil or sheet form and is further processed into finished products by the manufacturer. Hot rolled coil is typically 2-25mm thick and up to 2, 250mm wide.

Hot rolled coil is produced as a feedstock for cold rolled coil and coated coil, but also for direct use in a variety of industrial applications including steel tubes used in transport, construction, shipbuilding, gas containers, pressure vessels and energy pipelines. Hot rolled sheet with an anti-slip surface and a diamond or teardrop pattern is typically used for stairs, industrial floors and tailboards for goods vehicles.

Hot Rolled Coils
Quality:
1) Acc. To JIS G3131 SPHC or Equivalent
2) ST 37.2 DIN 17100 / ASTM A36 / 3SP / PS / 08KP
3) ST 44.2 / ST52.3 / API5L / Grade X B X42 / X52
4) A572 GR 50 / SAE 1008
5) ASTM A283 Grade C / EN S-235 JR / S-275 JR / S-353 JR
Size Range:
1.2 mm up to 16.0 mm
Packing: 10 25 MT Coil Weigh

Cold rolled steel is a flat steel product. The material is manufactured from hot rolled steel, the thickness of which is further reduced on a strip mill without the use of heat. The resulting thinner and flatter material is known as cold rolled steel. Typical thickness is from 0.15 to 3 mm. Typical width is from 600 to 2, 100 mm.

Finished cold rolled steel coil has excellent forming properties, electromagnetic properties, paintability and weldability It is suitable for fabrication by forming, pressing and bending.

Cold Rolled Coils (Annealed / Full Hard)
Quality:
1) Acc. To ST 12.03 DIN 1623 Oiled / Non Oiled
2) JIS G3141 SPCC-SD / EDDQ / DDQ
3) Grade 08 KP, ACC to GOST 1050-88 KP / PS Annealed or Full Hard
Size Range:
0.3 x 1000mm / 1219 mm and up
Packing:
Coil weight: 8mt and up, Coil ID: 508 / 600 / 610mm
Invoicing:
On actual weight basis

Obtained by passing cold rolled coil through a molten zinc bath, in order to coat the steel with a thin layer of zinc to provide corrosion resistance. Hot dipped galvanized coil can be found on the market in coil or in sheets and is further processed into finished products by the manufacturer. Typical thickness is from 0.3 to 3 mm. Typical width is from 600 to 2, 100 mm.

Hot dipped galvanized coil has excellent forming properties and is suitable for fabrication by forming, pressing and bending. Applications include domestic appliances, building applications (e.g. wall elements, roofing, automotive parts (e.g. underbody), lighting fixtures, drums and various kinds of sections and profiled sheets.

Hot Dipped Galvanized Coils
Quality:
1) Acc. to ST 02Z, Regular Spangle, Standard Coating, Coil Weight Max 6mt - 10 mt
2) JIS G3302-87 SGCC-RCX Coating as per JIS Standard with Regular Spangle
3) ASTM A653 / Tolerance As Per ASTM A924
Size Range:
0.3 mm and up