Electric Way FZCO

Dubai, United Arab Emirates

Showing the single result

Light in the Leisure industry sector is essential to the presentation of the service being offered and the creation of a conducive atmosphere to promote a pleasant environment to work, dine or relax. However, with increasing pressure for buildings to be environmentally friendly and energy efficient, the choice of lighting products has to be carefully considered. As maintenance costs are constantly scrutinised, high efficiency, long life, energy saving LED lighting provides the perfect solution to leisure applications.

We have a wide variety of street lighting solutions that include urban street lighting, decorative street lighting, architectural street lighting, modern and classic street lighting

Electric Way is home to a wide variety of high end European made decorative lighting solutions. From ornate chandeliers to classic home dcor fittings, Electric Way stocks them all. Our lighting products can be used in many different situations: villa lighting, palace lighting, hotel lobby lighting, mall and restaurant lighting, even mosques.

High-mast lighting is a tall pole with lighting attached to the top pointing towards the ground, usually but not always used to light a highway or recreational field. It is used at sites requiring lighting over a large area.

The pole that the lighting is mounted on is generally at least 30 metres (98 ft) tall (under this height it is referred to as conventional lighting system), while the lighting consists of a luminaire ring surrounding the pole with one or several independent lighting fixtures mounted around it. Most units have four, six or eight lights in the ring, with ten, twelve and sixteen lights used in rarer instances. While most high-mast lights are high-pressure sodium, other types such as mercury vapor, metal halide and LED, have also been used. Some units have the lighting surrounded by a circular shield to prevent or reduce light pollution or light trespass from affecting neighbourhoods adjacent to the highway.

Aesthetically superior, energy-saving faade lightings which are ecologically compatible.

An extensive selection of Scotch3M Medium Voltage tapes designed to complement our range of MV termination kits.

Resin cable joints are suitable for low voltage jointing of XLPE, PVC and utility cables, 1.5-400sqmm, 600/1000v up to 3.3kV.Resin cable joint ranges include straight, branch, multi-service, transition and pot-end joints all resin cable joints hold test certificate CENELEC HD 623.S1/DIN VDE0278, now renamed EN50393:2006 (BS6910 and BS7888 standards are now obsolete).Resin cable joints are suitable for underground (direct burial), submersed, cable tray and overhead cable jointing installation.Features

• A comprehensive range of resin-filled straight joints and branch joints for low voltage armoured power cables with conductor sizes up to 300 mm2.
• Designed with generous dimensions to accommodate modern mechanical connectors needing no special installation tooling.
• Insulation, sealing and mechanical protection provided by proven and qualified two-part resin supplied in convenient foil packs.
• Clear rigid joint shells to aid correct installation
• Armour continuity bonding components included in every kit.
• Qualified to national and international performance standards.

We supply a comprehensive range of Low Smoke Zero Halogen (LSZH) cables for use in applications where smoke emission and toxic fumes could pose a risk to human health and essential equipments in the event of a fire. Unlike PVC cables and those made of other compounds which produce vast amounts of dense black smoke, toxic fumes and acid gas when exposed to fire, LSZH cables produce very low levels of smoke and toxic fume and no acid gases. They are therefore often specified indoors, especially in public areas, and in other hazardous environments and poorly ventilated areas. This includes cars, aircraft, railway carriages and ships. LSZH sheathed cables are commonly used across tunnels and underground rail networks.

Low Smoke Zero Halogen cables are designed to emit less toxic and corrosive gas during combustion and are ideal for areas of low ventilation. Our Low Smoke Zero Halogen Cabling Range are manufactured to a very high standard and meet all the industry standards

CONSTRUCTION

• Conductors: Plain annealed stranded copper
• Insulation: XLPE (Cross linked polyethylene)
• Bedding: LSZH (Low smoke zero halogen)
• Armour/Protection: SWA (Galvanised single wire armour)
• Sheath/Jacket: LSZH (Low smoke zero halogen)
• Voltage:600/1000v

We supply a comprehensive range of Low Smoke Zero Halogen (LSZH) with dual Insulation of Special grade of Mica Glass tape for use in applications where smoke emission and toxic fumes could pose a risk to human health and essential equipment in the event of a fire.

Armoured MGT Cables are multi-core armoured cables designed as per BS 7846 with steel wire armour construction to meet category F2 fire test (C-W-Z test as per BS 6387)

CONSTRUCTION

• Conductor: Plain annealed Copper, stranded class 2 conductor to BS EN 60228
• Dual Insulation: Special grade of Mica Glass tape + XLPE
• Bedding: LSZH
• Armour: Galvanised steel wire armoured
• Outer Sheath: Robust LSZH sheath with Black colour as standard, other colours upon request

Electric Way supplies a comprehensive range of rubber flexible cables manufactured in accordance with a number of British, European and international standards.

H07RN-F Rubber Flexibles are designed to provide excellent flexibility during usage. These cables can withstand weather, medium mechanical and thermal stress. They exhibit very good oil resistance property.

CONSTRUCTION

• Conductor: Annealed flexible stranded tin coated or bare copper class 5 to IEC/BS EN 60228
• Separator: A suitable tape separator between the conductor and insulation as and when required.
• Insulation: Ethylene Propylene Rubber (EPR) type EI 7 to BS standard
• Core identification:
  • Colour coding of power conductors comply to HD 308, BSEN 50525 specification
  • Two core Blue, Brown
  • Three core Green/Yellow, Blue, Brown
  • Four core Green/Yellow, Brown, Black, Grey or Green/Yellow, Blue, Brown, Black
  • Five core Green/Yellow, Blue, Brown, Black, Grey
• Outer Sheath: A synthetic thermosetting compound to BSEN 50363-2-1
• Colour of outer jacket: Black (Other colours on request)
• Operating temperature: Temperature range of -25C to +90C. For fixed installation lowest temperature is -40C
• Short circuit temperature: 250C
• Voltage: 450/750 V
• Cable standard: BS EN 50525 2 21
• Flame propagation: IEC 60332-1-2:2004, EN 60332-1-2:2004

Building wire is used in the construction of almost every commercial, industrial, and residential property in the world. Most commonly known as branch circuit wiring in homes and businesses, these products carry electrical current to all external uses of power in a building or dwelling.

Electric Way supplies a comprehensive range of Low Smoke Zero Halogen Building wires manufactured in accordance with a number of British, European and international standard

Designed for use on earthing circuits within the ship wiring and marine industry 657 SW4 earthing cables are manufactured to BS 6883 and are double insulated for electrical safety.

The outer sheath is colored green/yellow for identification.

Electric Way supplies a comprehensive range of Instrumentation Cables manufactured in accordance with a number of British, European and international standards

Generally used within industrial process manufacturing plant for control, communication, data (analog/digital) and voice transmission signals and service typically in industrial project, oil, gas & petrochemical industry. It is also Used in Industrial Signaling and process control circuit and

Steel Wire Armoured Instrumentation cables provide longitudinal strength for use as messenger cable in vertical drops and provides safety against the mechanical damage.

CONSTRUCTION

• Conductors: Annealed Solid Copper (Class 1), Or stranded (Class 2) to BS EN60228
• Insulation: Ployethylene to BS 6234 Type 03. Pairs are identified by number printed on cores.
• Screen. Individual and collective Aluminium -Myler Screeb Tape with tinned copper (0.5mm)
• Bedding: polyethylene bedding for Type 2 and PVC bedding for type 3 cables
• Armour: Galvanized steel wire armour (SWA)to BSEN 10257 1.
• Outer sheath: PVC Sheath type TM1 for standard application.

A Control cable is designed for measuring, control or regulation in the field of process automation. It is a highly flexible multicore cable, with copper conductors and a galvanized steel wire braid (GSWB) for mechanical protection. The cable is typically manufactured with PVC insulation, bedding and a transparent PVC sheath

Control cables encompass a large family of cables manufactured to various British, European and international Standards. These include the widely used CY cable, SY cable. designed for a wide range of industrial process automation applications, including signal transmission, measurement, control and regulation. These control cables are often referred to by the application, such as machinery supply cable, motor cable and robotics cable. They are also known as multi-core cables, control flex and control flexible cables.

Screen Cable is used to reduce the effects of electromagnetic interference (EMI) or electrical noise which can disrupt the transmission performance in some environments. This noise may be as a result of external interference from other electrical equipment or as a result of interference generated within the cable from adjacent pairs.

Metal foil or braid may be used as a screen material, each with different properties and the screen may apply to the overall cable and/or to individual pairs in the cable.

The choice of screening is dependent on the environment where the cables are used and the applications they are required to run. For example, unscreened cables may be perfectly suitable for standard office applications, whereas screened cables may be preferred in industrial application or where higher performance transmission is required, or where data reliability and maximum throughput is paramount.

electric way is a supplier of comprehensive range of Screen Cables

We offer cable trays, electrical cable trays, GI cable trays, perforated cable trays, hot dip galvanized cable trays, galvanized cable trays, stainless steel cable trays, powder coated cable trays, truncking cable trays, cable raceways, ladder cable trays, cable raceways and cable tray accessories.

Unlike other Hot dip galvanized cable trays will have more life, because Zinc protects the base material and gives extra mileage.

Hot dip galvanized cable trays are best suitable even in high moisture area specifically in the coastal areas. These Hot dip galvanized cable trays are made of two types Hot dip galvanized perforated cable trays and Hot dip galvanized ladder cable trays. Since this Hot dip galvanized cable trays going to be used in the more wind area, we consider wind and external forces.

Available in the following classifications as:

• Plain Type
• Outside Return Flange
• Inside Return Flange
• 90 Outside Flange

We Offer Products that are used in parallel with cable trays including brackets, ground clamps and splices.

The several Cable Tray fixtures available are:

• Cable Tray Connectors: which join cable both straight sections and fittings
• Cable Tray Fitting: used to change direction or size of a cable tray system
• Cable Tray Support: Supports both cable tray sections and fittings
• Straight Section: A length of cable tray with no change in direction or size
• Elbow vertical: cable tray fitting which changes direction to a different plane
• Reducer: For joining cable trays of different widths at the same plane
• Tee Horizontal: fitting which is suitable for joining three cable trays at 90 angles from each other on the same plane
• Elbow Horizontal: fitting which changes direction in the same plane
• Cross Horizontal: fitting used for joining four cable tray assemblies at 90 angles from each other on the same plane
• Ventilated Bottom: A cable tray bottom with sufficient openings to allow the passage of air
• Metallic Cable tray system: an assembly of cable tray straight sections, fittings and accessories which forms a rigid structural system to support and organize cables.

Accessories available include:

• Right Angled Connectors
• Box Connectors
• Drop Out
• Bonding jumper
• Fish Plate
• Barrier Straight
• Hold Down Clamp
• Cover Clamp

Available Cover options include:

• Flange Solid
• Flange Ventilated
• Plain Ventilated
• Plain Solid
• tee Horizontal
• Cross Horizontal
• Elbow Horizontal (90 and 45)
• External Rise
• Internal Rise
• Reducer right
• Reducer straight
• Reducer Left

Trunking is a new, large capacity Cable management system for use in modern offices, Hospitals and Industries, and is ideal for both new building projects and refurbishments.

Electric Way has a comprehensive range of PVC & Metal Trunking and accessories for a wide variety of job applications from housing to heavy industry. The range includes Cable Trays Trunking and Cable ladders along with the accessories.

A cable ladder is generally regarded as being the strongest type of cable support product and can be made from steel, aluminum or FRP. For the support of high volumes of heavyweight cables over long distances, a cable ladder network offers a quickly installed, but strong and long term solution. They support cabling with rungs welded to side rails. All ladder systems use fittings to facilitate changes between cabling directions and levels.

Hot dip galvanized cable ladders are best suitable even in high moisture area specifically in the coastal areas.

Electric Way has a comprehensive range of cable ladders.

The Ladders come in three different classifications:

• Light duty: use spot welded rungs
• Medium and Heavy Duty: use welded or swaged rungs.

Cable Fixtures Available are:

• Elbow Horizontal (90/45)
• Tee Horizontal
• Internal and External Riser
• Cross Horizontal
• Reducer Straight, Left, Right
• Adjustable Divider, Horizontal Elbow, Vertical Connector
• Connector Straight and Expansion
• Hinged Horizontal, BlindEnd, Reducing, Right-Angle, Box Connector
• Dropout
• Hold Down Cover and Double Cover Clamp
• Guide Expansion
• Bonding Jumper
• Barrier Straight and Clip

The Following Cover Options are available:

• Flange Solid
• Flange Ventilated
• Plain Solid
• Plain Ventilated

Cable lugs, also referred to as Cable terminal are utilized to securely connect or terminate cables to electrical devices, power or control panels, junction boxes, equipments and machineries. These lugs are often used to join power cables together. Cable Lugs intended to ensure the safety of both the appliances and human beings. These lugs can be uniquely engineered according to the clients preferences and requirements.

The functionality of a cable lug is one of the most safe and common method of cable termination. It is designed in a way that cable termination and removal for maintenance or repair is very simple, thus a cable lug is broadly used instead of direct fastening methods.

Copper lugs are utilized widely for numerous functionality; they are often used to decrease the diameter of a thick cable for it to be able to attach the cable to the other end that are of small diameters.

Electric Way supplies a comprehensive range of cable lugs (also referred to as crimp lugs) designed for terminating and connecting our low and medium voltage cables to equipments.

Copper cable lugs are used to terminate the ends of battery cable and welding cable so they can be connected to other electrical equipment such as starters, fuse blocks, distribution blocks, etc. Made from pure copper, cable lugs are highly conductive and can handle very high currents.

Copper lugs can be either crimped using a cable lug crimper or hammer style crimper, or they can be soldered using solder slugs or other electrical solder.

Different Types of Cable lugs are

• Bimetallic Cable Lugs
• copper cable lugs
• Untinted copper cable lugs
• Insulated cable lugs blade type
• Insuated cable lugs Pin type
• Insulated cable lugs fork type
• Insulated cable lugs ring type
• Tinted copper cable lugs.

Electric Way provides a range of cable tools, designed for use across the whole spectrum of cable applications and installations. This includes our cable cutters, crimping tools, groove tools, terminal tooling, and cable tie tools.

Electric way is a supplier of comprehensive range of Shrouds with different sizes.

A range of push on shrouds which are used to minimize the risk of dirt or foreign substances gathering on the Cable Gland body are available.

Electric Ways range of Cable Cleats is designed to support and secure cables by fixing them either permanently or semi-permanently to a chosen cable route.

Cable Cleats are designed with either a single fixing point or as a two-part cleat with fixings on both sides. They are both stackable and recyclable, and are available as standard Polyvinyl Chloride (PVC) or as Low Smoke Fumes (LSF).

Cable Cleats can be used with cables of all constructions, including SWA cable, and in conjunction with our wider range of cable accessories such as cable glands and cable lugs.

Busbar Tapes is an adhesive-coated, high-voltage, heat-shrink general purpose tape for insulating straight and bent bars in retrofit applications where busbar tubing cannot be used. HV busbar tape insulates unusual copper connections in the factory or field. HV busbar tape is also ideal for protection against incidental/accidental bridging caused by birds and animals the high voltage busbar tape adhesive layer fuses the tape layers but does not stick to HV busbar providing environmental sealing while allowing fast, easy removal.

HV high voltage heat shrink busbar tapes provide electrical insulation and reduced clearances for high voltage switchgear, busbars and electrical equipment high voltage busbar tapes are suitable for circular and rectangular, copper or aluminum, 11kV-33kV.

HV busbar tape is suitable for electrical insulation 11kV-15kV in accordance with ANSI/IEEE specifications and 33kV-36kV in accordance with IEC

For connection of Cable to Switchgear Terminal, Transformer Terminal, Poles etc. termination kits are required. The Heat Shrinkable Termination kits can be Indoor or Outdoor based on actual application. It can also be single core or 3 core / 3.5 core based on cable configuration. Termination can be for XLPE Cable and can be used in extreme hazardous atmosphere conditions. We are also experts in manufacturing Heat Shrinkable Cable Terminations used for the requirements of low to medium voltage, the products have gained a broad and loyal clientele globally, which is an acknowledgment, for our international quality standards. Our items in this category are well-known for the stringent quality procedures. We Use in a broad spectrum of industries; these items have the various properties. The voltage grade is from 1Kv to 36Kv.

There are wide range of cable jointing systems available today, which can be classified by the way they are applied such as taped type, pre-moulded / push-on / slip-on type, cold application type and heat shrinkable type. The selection criterion for an appropriate type of jointing system by the user should be dependent on the site conditions, operating parameters, voltage applications and cable types.