Electrical Lighting CO WLL

Abu Dhabi, United Arab Emirates

A chandelier is a decorative ceiling-mounted light fixture. Chandeliers are often ornate, and normally use lamps. Crystal chandeliers have more or less complex arrays of crystal prisms to illuminate a room with refracted light.

The Luminaire can be used with CFL / GLS lamps & Suitable for 70-400 W Metal halide and High Pressure Sodium vapor lamps are suitable for surface mounted applications. Bulkheads Suitable for Outdoor and Indoor applications. These include security lighting for Industrial yards, where as general applications include tunnels, Underpass entrance, culverts & underground parking lots.

NGROUND LIGHT

luorescent Battens that conforms to EN 60598 & IEC 598 are suitable for T5 & T8/T12 fluorescent lamps in single double & triple tube versions. They can be operated by both Electronic & Electromagnetic ballast that can be used in both suspended and Surface mounted application. Suitable for general lighting applications in indoor areas like offices, schools, hospitals and commercial areas like shops.

WEATHER PROOF

Weatherproof Luminaire suitable for single or twin, T5 or T8/T12 fluorescent lamps operated by HF or Electromagnetic Ballast. Suitable for damp/dusty environments such as Industrial premises, factories, power plants, power distribution stations, warehouses, car parks.

HIGH BAY

Series are suitable for applications with high intensity discharge lamps. The luminaire is designed for Ingress Protection 65. range of High Bays are suitable for high mounting applications. The recommended applications are Warehouses, Manufacturing industries, Aircraft maintenance bays and automobile workshops.

FLOOD LIGHTING

Flood light series are suitable for applications with high intensity discharge lamps. The luminaire is designed for Ingress Protection 65. The floodlights are suitable for Outdoor and Indoor applications. These include security lighting for Industrial yards, Airport aprons. General applications include facade/monument lighting besides lighting of playing arenas and gymnasium.

STREET LIGHTING

Street light series are suitable for applications with high intensity discharge lamps. The luminaire is designed for Ingress Protection 65. The Street lights are suitable for Outdoor applications. These include security lighting for Industrial yard

INDOOR & OUTDOOR SERIES

EW series lighting fixtures are used to illuminate indoor or outdoor settings, either if diffuse or ambient light is required. EW series lighting fixtures are compatible with discharge lamps from 70W to 150W, mercury vapor, halogen, sodium vapor or high pressure. They are ideal to illuminate medium size settings.

BULK HEADS

HI series bulkhead lighting fixtures are ideal to illuminate narrow settings, such as tunnels, galleries, boiler rooms. HI series bulkhead lighting fixtures can be installed with discharge lamp, provided with a separate enclosure used to house electrical parts.

HAND LAMP

SECURLUX hand-held lamp is used to illuminate places difficult to get to, in any hazardous areas. The integrated handle makes it suitable to be easily carried and hung up. Battery recharge must be done in safe area, either from the electrical distribution network or in 12V DC through two power cables supplied. The battery recharges in 24 hours.

We offers compact Final distribution boards (FDB), a design aimed for safety, reliability and availability in the electrical building installation.Available in busbar and multi row types. Surface or flush mounting on requests and requirements.

TECHNICAL SPECIFICATIONSSingle row type:Range : 6, 9, 13, 18 and 22 ModulesMulti row type:Max. load : 100 ampsMax. voltage:230 / 400 V ac, 50 / 60 HzRange:16, 32, 48, 64 and 80 modules ; 1, 2, 3, 4 and 5 rowsBusbar type:Max. load : 250 ampsMax. voltage:230 / 400 V ac, 50 / 60 HzRange:4, 6, 8, 12, 16, 20 and 24 TP&N ways12, 18, 24, 36, 48, 60 and 72 SP&N waysDegree of protection:IP 41, pan assemblies IP 20Enclosure finish:Gray, RAL 7035/7032Fault level:16 kA

SALIENT FEATURES

• Compact DBs which occupy minimum space
• Raised neutral link for easy wiring
• Detachable din bar with end stoppers for easy assembly of breakers
• Supplied with fully shielded bus-bars
• Level marks for providing indication for fitment in wall
• Supplied with neutral & earth link, top & bottom detachable plates

AVAILABLE EXTENSIONS AND AUGMENTATIONS

• In accordance with BS 5486 Part 12 and BS EN 60439-1
• Modular design concept enables flexible selection of incomers, extension boxes, etc
• 250A continuously rated copper busbar
• 16kA short circuit capacity
• Fully shrouded phase busbars for increased safety
• One piece (no welds or rivets) phase busbars to eliminate the risk of hot spots
• Accepts 6kA, 10kA and 15kA MCBs and flying lead RCBOs
• Ample space behind pan assembly aids wiring installation
• 25mm terminal cable capacity on earth & neutral bars
• Shrouded neutral terminal bars for increased safety

REGULATORY COMPLIANCE

• Compliant to IEC standards 61439-1/61439-2/61439-3/60898
• Designed to meet local technical standards, practices and requirements

An MDB is a panel or enclosure that houses the fuses, circuit breakersandground leakage protection unitswhere the electrical energy, which is used to distribute electrical power to numerous individual circuits or consumer points, is taken in from the transformer or an upstream panel. An MDB typically has a single or multiple incoming power sources and includesmain circuit breakersand residual current or earth leakage protection devices. A MDB is comprised of a free standing enclosure, a bus bar system, MCCB's, metering and support equipments and required current transformers. Panels are assembled in a systematic manner such as incomer section and outgoing section.

Key features of Main Distribution Boards:

• Fully type tested assemblies as per IEC 61439-1
• Rated upto 6000A
• Rated operating voltage upto 690V
• Manufactured to Form 2, Form 3 & Form 4 construction
• Type tested for 85kA/1 sec, 50kA/3 sec
• Designed for both withdrawable & fixed versions
• Ample cabling space for easy connections
• Top and bottom cable entry.
• Panels for front or rear access to suit application
• Index of protection : IP 31 & IP 54
• Floor mounting
• Maximum safety & reliability
• Modular system with Customized design to meet end user requirements.

Feeder Pillar are mainly used to terminate & distribute the electrical control circuits to end stream of Main panel and lighting distribution.

Key features ofFeeder pillar

• Feeder Pillar are designed & manufactured in compliance to latest IEC standards and local authority regulation.
• FP with incomer as MCCB, NH type vertical switch fuse units upto 2500A and HRC fuse in compliance.
• Degree of Ingress Protection upto IP65
• Optional Metering, ON-OFF supply & fused indications & contractor plus photocell circuit for lighting feeder pillar, kWH with viewing window, fall under our scope of supply.
• Canopy type ceiling, single-double door construction, base pedestal, gasket seal protection and other reliable protections for outdoor applications.
• Enclosures are glavanised, stainless steel, GRP & sheet metal shall be vermin, corrosive resistant, damp proof.
• High end Customer satisfaction is assured interms of user safety, protection to point of utilization and dependability in operation maintenance.

Lighting Control Panel combines remote operated circuit breakers and a microprocessor-based controller. This Lighting Control Panel reduces energy costs by programming lights to turn off during unoccupied periods. Users can also save space and installation costs by removing the need for external control cabinets, wiring relays, contractors, and time clocks.

SALIENT FEATURES

• Open Protocol Systemcommunicates via Modbus, RTU/TCP without the requirement of gateways
• 16 Schedulesare available including a 7-day repeating schedule with 16 daily On/Off periods
• 16 Lighting Zonesgroup branch breakers that are controlled by schedules, manual inputs, or override commands
• Electronic Clockcapabilities include a real-time clock, astronomical clock, and leap year and daylight savings time adjustments
• Burn-hour trackingtotals run time on breaker loads
• Load Priority Managementenables the user to set load shed levels on each breaker
• Event and Trend Logsprovide a record of alarms and status changes
• Remote Operated Circuit Breaker Softwareoption allows users of A-Series Lighting Control Panels to program panels using a PC-based application that makes it easy to create lighting zones, establish on/off schedules, and collect data on burn hours

AVAILABLE EXTENSIONS AND AUGMENTATIONS

• Form 2 construction, up to IP 55 protection possible
• Panel to control Area lighting, street lighting, factory lighting etc
• Manual and automatic operations
• Timer / Photocell logic
• Suitable for Indoor and Outdoor applications

We offer a comprehensive range of both electromechanical and electronic starter panels, comprising a full range of direct on line, star delta, soft start and variable speed drives / inverters. Control panels are available for single and multiple pumps or motors. All of the production can be expanded with many modular options. Bespoke panels for specific client applications are a speciality. Full technical support is offered at all levels