Our Product / Services
This safety valve releases water (thus relieving pressure) if either the temperature or pressure in a tank gets too high.
An air handling unit (AHU), conditions and circulates air as part of a heating, ventilating, and air-conditioning (HVAC) system. A typical air handler is a large metal box containing a blower, heating and/or cooling element, filter racks or chambers, sound attenuators, and dampers. Air handlers connect to ductwork that distributes the conditioned air throughout the building and returns it to the AHU. AHUs can alternately be set up to discharge (supply) and admit (return) air directly to and from the space served without ductwork.
Commercial grade air purifiers are manufactured as both a small stand-alone unit and as larger units that can be affixed to an air handler unit (AHU) or to an HVAC unit. Air purifiers are commonly found in the medical, industrial, and commercial industries.
Air terminal units are small air handlers designed for local use and may only include an air filter, coil, and blower. These simple terminal units are called blower coils or fan-coil units. Makeup air units are larger air terminals that condition 100 % outside air (and no recirculated air). Air handlers designed for outdoor use, typically mounted on rooftops, are known as packaged units (PU) or rooftop units (RTU).
Vents with motor-driven louvers, actuated electronically or via pressure valve, available in many sizes and configurations.
Cartridge filters are used to filter Chlorine from water eliminating bad taste and odor. There are several different types of filter designs including depth and pleated. Media types include carbon, coconut carbon, ceramic and membrane.
A chiller is a machine that removes heat from a liquid via a vapor-compression or absorption refrigeration cycle. This liquid can then be circulated through a heat exchanger to cool air or equipment as required. As a necessary byproduct, refrigeration creates waste heat that must be exhausted to ambient or, for greater efficiency, recovered for heating purposes.
Cooling towers are heat removal devices used to transfer process waste heat into the atmosphere. Cooling towers may either use the evaporation of water to remove process heat and cool the working fluid to near the wet-bulb air temperature or, in the cased of closed circuit dry cooling towers, rely solely on air to cool the working fluid to near dry-bulb air temperature.
Mounted inline in an HVAC system Electric Duct Heaters heat air as it passes over an electrically heated coil. The units can be actuated remotely by connecting them to the Building Management System or locally via temperature sensor.
Fundamental to HVAC systems, these fans are built-to-order for specific applications and can be supplied in a timely fashion. Exhaust and supply fans are available in a number of different configurations and sizes designed to meet concise specifications. Examples include roof-mounted dome fans, axial and centrifugal in-line fans, wall-mounted propeller fans and in-line utility blowers.
A fire pump is a part of a fire sprinkler systems water supply and can be powered by electric or diesel. The pump intake is either connected to the public underground water supply piping, or a static water source (e.g., tank, reservoir, lake). The pump provides water flow at a higher pressure to the sprinkler system risers and hose standpipes.p>Manufacturers:Sempa
Flexible connectors excel in shock and anti-vibration applications. They can create a gasket-like seal for harsh environments. Flexible connectors are available in many sizes, types, and configurations.
Analog and digital monitoring equipment for use in many applications from HVAC to water movement and control.
Grilles, registers, diffusers and louvers are the aesthetically-functional face of an HVAC system. They are available in an unlimited array of sizes, colors, controls, and configurations and can be custom-designed to suit any project. Along with standard units, specialized units are available for security and fire prevention applications, and designed with special filters for use in hospitals and laboratories.
Humidified air can protect wooden objects and other sensitive furnishings which may be damaged by overly-dry air. In colder months, humidifiers provide substantial energy savings as occupants feel warm at a lower temperature with humidified air. For buildings with a forced-air furnace, a humidifier may be built right into a furnace.
Industrial blowers are primarily used to exhaust foul air and replace it with fresh outside air. They are typically used for high volume, high static pressure applications to provide general ventilation in heavy-duty commercial and industrial applications including factories, warehouses, gymnasiums, underground parking garages, etc.
Natural ventilation is the process of supplying and removing air through an indoor space by natural means. There are two types of natural ventilation occurring in buildings: wind driven ventilation and stack ventilation.
Precision air conditioning units are designed to run non-stop maintaining a very close control on environmental conditions such as temperature and humidity.
Reverse Osmosis Systems remove inorganic solids by using household water pressure to push the tap water through a semipermeable membrane. Filtered (soft) water will not harm plumbing pipes and components and is safe for everyday household use. Systems are designed for residential and commercial applications.
Sand Trap Louvers are designed to separate debris from the air stream and are generally used for ventilation applications and at the inlet duct of air handling units. Sand trap louvers can be operated manually operated by a motor located on the back of the louver.
Automatic smoke curtains are designed to deploy in the event of a building fire. Smoke curtains channel smoke away from emergency exit areas away from building occupants. Fire curtains are used to isolate areas of a structure during a fire to keep the fire from spreading. The use of automatic smoke and fire curtains has grown over the last few years as fire engineered solutions have become more complex and architectural demands have placed greater demand on fire strategies.
Sound attenuators (silencers) are used in HVAC systems to help absorb noise that is generated by fans or other air moving equipment.
Storage tanks accumulate and store collected matter. The size of an expansion tank depends on the system pressure, collector area, system volume, and static height of the system.
UV Disinfectant Systems use ultraviolet lamps to effectively remove bacteria and other pathogens providing clean water for home and office. UV treatments are safe to use and chemical free. UV treatment does not change the taste, odor, pH or the general chemistry of water. UV systems are compatible with all other water treatment equipment including reverse osmosis, filtration, water-conditioning and softening.
Valves may be operated manually, either by a hand wheel, lever or pedal. Valves may also be automatic, driven by changes in pressure, temperature or flow. These changes may act upon a diaphragm or a piston which in turn activates the valve, examples of this type of valve found commonly are safety valves fitted to hot water systems or steam boilers.
Passive vibration isolation systems consist essentially of a mass-spring-damper system. Isolating devices reflect and absorb waves of oscillatory energy extending from a working gear or piece of electrical equipment with the aid of effect of vibration insulation. Isolators are available in a wide range of sizes and configurations.
Water softeners remove calcium, magnesium and other minerals from ground water. These minerals can dissolve out of the water and build up on the insides of pipes, water heaters, etc., reducing water flow and eventually plugging up pipes. Hard water also reduces the ability of soap to lather and can react with soap to form a sticky scum. Systems are designed for residential and commercial/industrial applications.
Self check-in kiosks provide airline passengers with a quick and convenient alternative to traditional check in. Passengers holding e-tickets can check in, choose their seats and print a boarding pass. Along with helping to design the right system for your needs, EIC offers installation, testing, and preventative and operational maintenance.
Hand-held ticketing machines are designed to reduce the number or errors made when issuing tickets for parking violations. The device uses a combo-box menu to enter data before the final citation is printed. The data is stored in the hand-held system and entered into the main data system at the end of the enforcement officers shift.
Hand held ticketing machines are designed to replace paper tickets and speed up mobile fare collection and inspection for all mass transit transit systems. The systems can improve reliability, security and speed of transaction while reducing cost. The system can also streamline travel between different modes of transit and the data can be used to determine passenger flow. EIC has installed more than 5, 200 devices on 1, 200 buses in Dubai as part of an ongoing upgrade of the Dubai transit system.
Automated barrier parking systems are a convenient way to manage pay-for-parking facilities around the clock. EIC is an experienced provider of automated parking equipment, having installed the first system in 1988 at the Dubai International Airport. We can help you choose the right system for your needs and provide you with installation and preventative and operational maintenance.
Universal card vending machines are commonly used to dispense pre-paid transit cards for use by daily commuters, but these machines can be custom designed to handle any type of card from pre-paid phone cards to debit cards. EIC can help design the right machine to meet your needs.
Universal card vending machines are commonly used to dispense pre-paid transit cards for use by daily commuters, but these machines can be custom designed to handle any type of card from pre-paid phone cards to debit cards. EIC can help design the right machine to meet your needs.
A building automation system (BAS) is an example of a distributed control system. The control system is a computerized, intelligent network of electronic devices, designed to monitor and control the mechanical and lighting systems in a building.
Card access systems control the security in your building. May include a photo ID card system, proximity cards, and software that maintains real-time logs of entrance/exit and database capabilities.
CCTV Systems greatly improve security thru the use of video transmission, face recognition, and vehicle plate recognition systems. Energy International offers conventional CCTV and CCTV over IP Systems.
A system of computer-aided tools used by operators of electric utility grids to monitor, control, and optimize the performance of the generation and/or transmission system.
Used for measuring energy in systems and comes equipped with an LCD display. Can be connected directly to a network.
Control residential units, offices, and entire building thru KNX network of Merten by Schneider Electric. The system can control lighting, HVAC, security intrusion, fire alarm, and any appliances with optional fixed or wireless touch screens.
HVAC temperature controls maximize your structures energy performance and client comfort.
Low-voltage wires and cable for CCTV, security, fire alarm, sound, and audio-visual communications.
An assembly of one or more enclosed sections having a common power bus and principally containing motor control units.
An electronic amplification systems with amplifiers, loudspeakers, ambient microphones, call stations, and computerized control monitoring to suite any of your requirements.
Direct-drive and belt-drive centrifugal roof exhausters are designed for roof-mounted installations in low- to medium-pressure applications. Domex fans are ideal for general purpose exhaust applications such as bathrooms, garages, kitchen areas, offices, churches, dormitories, factories, large warehouses and other relatively clean air applications.
The Dynamo fan is used for supply or exhaust applications in commercial, institutional and industrial HVAC systems. At the heart of the Dynamo is a computer-designed, backward-inclined, centrifugal wheel. This heavy duty, non-overloading aluminum wheel assures low-noise and high-efficiency performance.
Gravity ventilators offer the Turbine, Pul-Air and Insul-Air models. Turbines are ideal for the general ventilation of factories, farm and agriculture buildings, commercial and public structures and homes. The Pul-Air is a simple device designed to permit an easy outward flow of air with no internal obstructions or moving parts requiring maintenance. The Insul-Air is the ideal choice where an extended airshaft is necessary (to clear the peak of the roof, for example). It features all the study construction details of the Pul-Air plus an extended airshaft and an integral flat mounting base.
Full, positive opening contributes to less power rob and a reduction in power usage. Dampers are constructed of extruded aluminum for a clean, fresh appearance with a blade linkage mounted on the side. Dampers are counterbalanced to provide true pressure relief. Dampers feature noiseless nylon bearings, are spark-proof and require less maintenance than competitive units.
Louvers are available in a wide range of configurations including acoustical, severe weather, aluminum, steel, volume-control and backdraft applications.
Single duct air terminal units are at the core of todays variable air-volume (VAV) systems, lowering operating costs by using less centrifugal fan energy and less refrigeration energy. Single duct air terminal units regulate conditioned air flow into an occupied zone in response to a control signal. Units are available in a wide range of control options including pneumatic, analog electronic, electric and direct digital control.
A square diffuser is engineered to deliver both conditioned and ventilating air. They evenly distribute air in a desired direction and enhance mixing of room air with the primary air being discharged, while producing a minimum amount of noise.