Essentra Components

Dubai, United Arab Emirates

Tamper indicating screw cover is featured with clear indicating screw cover. It is made from polycarbonate RMS-23 material. It is suitable for protecting screws better than plastic covers.

• Supplied in polycarbonate RMS-23.
• Suitable for protecting screws and stays better than plastic covers.
• Tamper evident.

Side Release plugs are produced in natural LDPE material and it is designed with unremitting sealing lip and a strong and convenient side-tab. These are adaptable plugging components which are widely applied in hydraulic and pneumatic industries.

• Supplied in two types.
• Type 1 has a rounded plug pattern to ensure low-abrasion fit.
• It is available in natural LDPE material.
• Adaptable in design and suits for convenient fitting./li>
• Widely applied in hydraulic and pneumatic applications.

Silvery White, Aluminium Foil (Outer Layer), Fiberglass Sleeving (Inner Layer)

• Melting point: 60020C
• Working temperature: -50C +200C
• It offers perfect protection for industrial wire, cable, hose, pipes, tubing and equipment that is in close to intense radiant sources such as super-hot metal slabs, liquid and molten metals or glass, open flame or engine exhaust manifolds.

White Nomex Fiber

• Working temperature: -196C +350C
• No melting point
• Used for a wide range of applications such as military, aerospace, race car, fire department to protect the cable and wire from the dangers that come with working in and around intense flame and heat
• Cutting tool: scissors
• Resistant to most alkalis and acids

Black Polyester

• Working temperature: -50C +150C
• Melting point: 24010C
• Flammability: DIN5510, VW-1
• Overlap: 75%
• Most commonly used in railways and automotive where the wire harness and hoses need high flame retardant, heat dispersion and durable protection
• Cutting tool: Hot Knife

Black and Grey Polyamide 6.6

• Working temperature: -60C +160C
• Melting point: 2565C
• Most commonly used to protect wire harnesses, cable assemblies, air conditioned pipes, fluid pipes in automotive, aerospace and military applications.
• Cutting tool: Hot Knife

Compression fit plugs are supplied in yellow LDPE material. These are widely applied in hydraulic and pneumatic applications. Compression fit plugs are designed for protection of DKO compression fittings. It is provided with fin which supports for strong fitting into the DKO swivel nut.

• Compression fit plugs are widely applied in hydraulic and pneumatic industries.
• These are supplied in yellow LDPE material.
• Provided with fin which gives strong and perfect fitting into the DKO swivel nut.

2:1 clear heat shrink tubing is made from transparent and crosslinked polyolefin material. It is a commercial grade heat shrink tubing product that can be applied for different sorts of general purpose applications where flame retardant property is not needed. It is an ideal component for showing electrical insulation and mechanical performance.

• It shows shrink ratio of about 2:1.
• Works at operating temperature of about -55C to +105C.
• Shows 70C of minimum shrink temperature.
• Shows 95C of maximum full recovery temperature.
• It is RoHS complaint.
• It is supplied in reels.

Parallel Protection plugs are exclusively created to meet general-purpose sealing and locking requisites. These are made of while colour LDPE base material and very popular among the ranges of general purpose sealing gadgets. Sealing features are without compromise absolute, perfect as it prevents dirt or moisture intrusion.

• Applied as a general-purpose plug.
• Made from strong and rigid natural LDPE base material.
• Provides complete sealing and protects from moisture and dirt intrusion.
• Stays a good sealing option during transport and storage requirements.

Straight Pull Plugs bears good grip and they are designed for sealing variety of industrial components like tubes and pipes. These gadgets works like threaded plugs however, provide the similar perfection in locking. Industries which are looking for easier mode of locking and releasing can find better applicability with straight pull plugs. We have yellow colour straight pull plugs made from sustainable LDPE material.

• These are easy to push and easy to remove sealing plugs.
• Equally advantageous to conventional threaded plugs in spite of easy plugging in feature provided.
• Available in different dimensions.

Sealing slottex plugs are designed with double sealing ring under the flange which provides perfect sealing. These gadgets stay easier to fix and remove and give good protection; it can be tightened with a screwdriver or a power tool. The head design of sealing slottex plug prevents liquid trapping.

• The double sealing ring under the flange gives perfect sealing.
• It can be tightened further.
• The head design is unique and it prevents liquid trapping.
• Available in yellow LDPE material.

We supply Banjo Union Plugs made from natural LDPE material and this product is a perfect protection component applied in hydraulic and pneumatic applications especially fits banjo unions DIN 7642 B/E. It helps in preventing intrusion of contaminating agents like dirt and moisture.

• Supplied in different diameters to suit different dimensions of banjo unions.
• Suits best for banjo union DIN 7642 B/E.
• It helps in preventing dirt and moisture intrusion.
• Supplied in natural LDPE material.

RJ connector plugs are supplied in Silicone rubber RMS-383 material. It is available different sizes and we provide connector plugs suitable for connector models RJ11 and RJ 45 Connectors.

• Supplied in Silicone Rubber Rms-383.
• Available in different sizes.
• Suitable for RJ 11 connectors and RJ 45 connectors

Masking Pull Plugs are ideal for masking threaded and plain through-holes. The pull-tab allows an easy insertion into a hole and also become very handy to remove the part when hole is very tight. The material is flexible to allow slight variation in the sizes to mask.

Covered Tapered Plugs are use as a general purpose plug for a wide range of applications. Quick to fit and to remove, the convexed sides ensure a secure fit.

Masking Flangeless Plugs are designed to mask holes without masking the surrounding area. The tapered rings and hollow core allow many diameters to be protected. Profile has a pull-tab for easy installation and removal.

High Temperature Washer Plugs are available in two different material options; either a natural silicone rubber or black EPDM. They both act as plugs for either threaded or plain holes and also mask the surface around the hole. The integral washer and plug combination performs as a single unit.

Wide Flange Threaded Protection Plugs are made of nylon to absorb paint and keep flaking at a minimum avoiding contamination upon removal. The nitrile gasket seals the plug to the mating surface for a watertight seal.

Threaded Protection Plugs are made of nylon or HDPE to guard NPT Threads from contaminants and moisture during production and shipment. The easy to grip head design makes for efficient application and removal by hand or hand tool.

Tube end plugs provide an effective and efficient method of sealing circular tubes. Applications include secure closures for postal tubes and composite containers and for plugging plastic tubing.Secure closures for postal tubes, composite containers and clear plastic tubing.

Flange Protector Retainer Plugs are an effective solution for securing full face protective discs to the flange surface. Simply insert the plug through the flange protector and directly into the bolt holes for firm, secure protection. Four plugs are recommended to firmly fasten each full face protective disc.

Dimensional Twin Stick remains an excellent sticking supportive component for displays which can stand with 3D effect. It is provided with permanent fast tack rubber-based adhesive foam blocks on both sides. It stays a suitable gadget to be applied for extreme gap filling and we supply this material in black and white colours.

• Stays ideal for displays which can bring out 3D effect of the display.
• It can also be applied for extreme gap filling.
• Provided with aggressive fast tack rubber based adhesive foam block.
• Supplied in black and while foam.
• For dark backgrounds black foam stays effective.

Lubrication-free corrosion resistant Ball Bearings capable of rotational speeds that exceed the limits of a plain bearing.

Rotary Dampers - Without Gear control the speed and acceleration of a movement in a travelling body. Simple to install, they can be fitted as part of an assembly. Available in a range of torques and gear profiles.

Flanged mounting surface for easy assembly. Secured with four mounting bolts. Made of high strength aluminum alloy. Block can be reamed to accomodate larger shafts.

Used to protect NPT Thread against contaminants and moisture. The knurled head design allows the user to install or remove these by hand easier.

• Steel cable is removable only with tool
• Non-preformed cable unravels when cut to prevent tampering
• Compliant with ISO17712:2010 and C-TPAT with cable diameter above 3.5mm
• Used worldwide to secure import / export goods

2:1 heat shrink tubing reel is a UL approved product. It is shows flame retardant property and stays highly flexible for applications. It can be applied for all general purpose applications. It is available in wide range of colors.

• It shows shrink ration of about 2:1.
• UL approval 125C VW-1 600V File No.E204071.
• It is RoHS complaint.
• Can be applied at operating temperatures -55C to +125C.
• Shows minimum shrink temperature of about 70C and minimum full recovery temperature of about 100C.
• It is highly flexible for application.
• Can be applied for general purpose applications.
• Available in variety of colors.

2:1 yellow and green striped heatshrink tubing shows outstanding chemical, electrical as well as physical properties. It is easy to install and suitable for ground conductors. It shows good flame retardant and UV resistant properties.

• Shows 2:1 shrink ratio.
• UL Approval: 125C VW-1 600V File No.E204071.
• RoHS complaint.
• Can be applied at operating temperatures -55C to + 135C.
• Shows 70C of minimum shrink temperature.
• Shows 100C of minimum full recovery temperature.
• Applied for general purpose applications.
• Shows good electrical properties.

3:1 Adhesive lined heat shrink reels are supplied in round and flat shape and available in different colors. It provides excellent electrical insulation and sealing properties. Except clear adhesive lines heat shrink reels other types show flame retardant properties.

• Shows 3:1 of shrink ration.
• Shows minimum shrink temperature of 70C.
• Can be applied at operating temperatures -55C to + 125C.
• RoHS complaint.
• UL Approval: 125C VW-1 600V File No.E204071.
• It is made of UV resistant material.
• Provides good electrical insulation properties and sealing properties as well.

Rapid cable wrap is preferred for tough and durable protection in cable looms. It offers crush resistant protection and prevents cables from damage. It is supplied in polyethylene rapid cable wrap which is easy to install without the support of tools.

• It is crush resistant.
• Provides tough and durable protection for cables looms.
• Protects cables from damages and wear without affecting flexibility.
• It is easy to install without assistance of special tools.

Adhesive tie mounts are suitable for tying lightweight wire bundles. These are flammability rated with Ul94 V2 and supplied in natural nylon 6.6. It is featured with panel hole to support optional mounting aspect with screw. The adhesive base supports for easy fixing and we provide this component to suit different panel thicknesses.

• Suitable for tying lightweight wire bundles.
• These are flammability rated with Ul94 V2 and supplied in natural nylon 6.6.
• It is featured with panel hole to support optional mounting aspect with screw.
• The adhesive base supports for easy fixing.
• Provided in different dimensions to suit different panel thicknesses.

Adhesive twist ties are supplied in natural nylon 6.6. It is featured with strong adhesive at the base to provide secure installation. It is designed to obtain quick and easier fixing. The ties can be easily opened or twisted to close while accommodating cables inside. It secures cables or wires perfectly. It is UL94 V2 flammability rated.

• Adhesive twist ties are supplied in natural nylon 6.6.
• Featured with strong adhesive at the base to provide secure installation.
• Designed to obtain quick and easier fixing.
• The ties can be easily opened or twisted to close while accommodating cables inside.
• It secures cables or wires perfectly. It is UL94 V2 flammability rated.

Adhesive/screw mount tie is supplied in black UL94 V2 nylon 6/6 RMS-01. It is designed for holding maximum of 28.5 mm of cable bundle and can be mounted also with M2.5 mounting screw. It is featured with adhesive and the adhesive is supplied in 0.8mm thick acrylic adhesive tape RMS-15.

• Supplied in black UL94 V2 nylon 6/6 RMS-01.
• It is designed for holding maximum of 28.5 mm of cable bundle and can be mounted also with M2.5 mounting screw.
• It is featured with adhesive and the adhesive is supplied in 0.8mm thick acrylic adhesive tape RMS-15.

Adjustable steel clamp with vinyl coating is supplied in soft steel RMS-243 with 0.5m thick coating and the coating material is made of soft black PVC RMS-118. It allows minimum drip at the tip of the part. We supply this component in different dimensions to suit variety of bundle sizes.

• Supplied in soft steel RMS-243.
• Coating is provided in soft black PVC RMS-118.
• Featured with 0.5mm thickness coating.
• Allows minimum drip at the tip of the part.
• Available in different dimensions.

Beaded hanking tie is supplied in natural polyethylene RMS-155. Beaded ties provide flexible and protective way for cable management. It is featured with releasable ties which suits best for applying in places where frequent cable or wire insertion and removal is required. It is suitable for temporary cable management and remains cost effective as well.

• Supplied in natural polyethylene RMS-155.
• Beaded ties provide flexible and protective way for cable management.
• It is featured with releasable ties which suits best for applying in places where frequent cable or wire insertion and removal is required.
• It is suitable for temporary cable management and remains cost effective as well.

Blind hole mounted clip is designed to provide easy push installation into the mounting hole. It can be installed with the help of standard 6mm hexagonal socket which need to be pressed onto the mounting head. It is suitable for applying on minimum 6.35mm of panel thickness. We supply this component in natural nylon 6/6 RMS-01.

• Blond hole mounted clip is designed to provide easy push installation into the mounting hole.
• Can be installed with the help of standard 6mm hexagonal socket which need to be pressed onto the mounting head.
• It is suitable for applying on minimum 6.35mm of panel thickness. We supply this component in natural nylon 6/6 RMS-01.

Cable tie holder is supplied in UL94 V0 nylon 6/6 RMS-19 or UL 94 V 2 nylon 6/6 RMS-01. It can be used to accommodate maximum of 2.8mm of cable tie width. It is a suitable cable tie holder component for fast mounting and fixing requirements.

• Supplied in UL94 V0 nylon 6/6 RMS-19 or UL 94 V 2 nylon 6/6 RMS-01.
• It can be used to accommodate maximum of 2.8mm of cable tie width.
• It is a suitable cable tie holder component for fast mounting and fixing requirements.

Push mount ties WIT-RA/WIT-SA is supplied in natural UL94 V2 nylon 6/6 RMS-01. It can be fixed by just pushing into the already drilled hole by single pierce harness. It is flexible to accommodate bundling of cables before or after mounting. We supply this component in different dimensions and with different tensile strengths.

• Supplied in natural UL94 V2 nylon 6/6 RMS-01.
• Can be fixed by just by pushing into the pre-drilled hole.
• Installed by single pierce harness.
• Flexible to accommodate bundles before or after mounting.
• Available in different dimensions and with different tensile strengths.

p align="justify">Releasable push mount ties-WIT -30 RAR/WIT-30 LAR is supplied in natural UL 94 V2 nylon 6/6 RMS-01. It is reusable and provided with snap-lock to allow easy fixing for the user. We provide this component in different dimensions to accommodate 31.8mm and 25.4mm of cable bundle widths and can be applied in 2-2.4mm thickness panels.

• Supplied in natural UL 94 V2 nylon 6/6 RMS-01.
• It is reusable and provided with snap-lock to allow easy fixing for the user.
• We provide this component in different dimensions to accommodate 31.8mm and 25.4mm of cable bundle widths and can be applied in 2-2.4mm thickness panels.

Stand-off harness clip is supplied in natural UL 94 V2 nylon 6/6 RMS-01 or natural UL 94 V0 nylon RMS-19. It can be applied with easy push mount by just applying finger tip pressure. It is an UL approved product and available in different dimensions. The stand-off feature suits best for spacing requirement in cable mounting.

• Supplied in natural UL 94 V2 nylon 6/6 RMS-01 or natural UL 94 V0 nylon RMS-19.
• It can be applied with easy push mount by just applying finger tip pressure.
• It is an UL approved product and available in different dimensions.
• The stand-off feature suits best for spacing requirement in cable mounting.

Wire saddle locking top teardrop is supplied in black UL94 V0 nylon 6/6 RMS-19. It is featured with locking top is an easy and flexible option suitable for repair or replacement requirement. It also stays convenient at times of adding wires or cables. The teardrop design reduces the difficulty in cable insertion and provides good holder strength under the chassis.

• Supplied in black UL94 V0 nylon 6/6 RMS-19.
• It is featured with locking top is an easy and flexible option suitable for repair or replacement requirement.
• It also stays convenient at times of adding wires or cables.
• The teardrop design reduces the difficulty in cable insertion and provides good holder strength under the chassis.

Channels are supplied in white polystyrene RMS-16 material. It is used to mount cables of different dimensions. It allows easy cable insertion from front to back or from back to front. It is a perfect component for concealing or managing cables or wires. We provide two types of channels suitable for inserting variety of cable dimensions.

• Supplied in white polystyrene RMS-16 material.
• Used to mount cables of different dimensions.
• Protects cables and wires.
• It allows easy cable insertion from front to back and vice versa.
• Perfect component for concealing and managing cables as well as wires.
• Available in two types.
• Suitable for variety of cable thicknesses.

Liquid tight plug IP67 is supplied in UL94 V0 silicone rubber RMS-398 black material. It is designed with snap-fit design that allows for quick installation. It is featured with integral sealing ring to ensure high quality sealing at the mounting location. It is cost effective than plugs made of steel and available in sizes to be applied into variety of panel thicknesses.

• Supplied in UL94 V0 black silicone rubber RMS-398.
• Designed with snap-fit design.
• Allows for easy installation.
• Featured with integral sealing ring that ensures excellent sealing at the mounting hole location.
• Suitable and cost effective plugging component than steel plugs

Non-slip strain relief bushes are supplied in heat-stabilized nylon 6.6. These are created to be applied to make loops on a cable and are safe to use. It is a highly durable and effective component. It is temperature resistant and can withstand push and pull forces. It is designed to provide quick and easy installation.

• Supplied in heat-stabilized nylon 6.6.
• Used to make loops on cable.
• Safe to use.
• High durable and effective.
• Suitable for applying in varying temperature.
• Can withstand push and pull force.

Self-lock strain relief bushes are available in heat stabilized nylon 6.6 material. It helps cables in terms of eliminating strain and water. It provides self-locking feature between the bushing portions. The bushing material fixes firmly on rectangular products. It can be fixed both manually as well as with tools.

• Supplied in heat stabilized nylon 6.6 materials.
• Helps cables in terms of eliminating strain and water.
• Provides self-locking feature between the bushing portions.
• It fixes firmly on rectangular products.

These cable gland inserts are designed to fit inside a metric cable gland. They are available with a various number of holes that allow several cables to be led through it simultaneously. They provide excellent watertight protection for each wire. There is no need for a gland for each wire which reduces the space that is needed.

Circuit board puller is supplied in natural nylon 6/6 RMS-01. This component is designed to provide easy insertion and extraction solutions of applying PCB as well as tight gripping multi-pin edge connectors. It supports for damage free insertion and extraction of PCBs and similar components.

• Supplied in natural nylon 6/6 RMS-01.
• Designed to provide easy insertion and extraction solution.
• Suitable for inserting and extracting PCB, connectors, etc.
• Allows for damage free installation.

Multi panel card guide is supplied in natural UL94 V0 nylon 6/6 RMS-19. It is available in different sizes and designed to fit 0.8 to 2mm thickness PCB and 0.5 to 2mm mounting hole panel thickness.

• Supplied in UL94 V0 nylon 6/6 RMS-19.
• Designed to fit 0.8mm thickness PCB and 0.5 to 2mm thickness of mounting hole panel

PCB inserter/extractor installation pin is made from 302 stainless steel, RMS-320. It is a compulsory component that supports for installation of inserter and extractor of PCB.

• Supplied in 302 stainless steel, RMS-320.
• Supports for installation of insertion and extraction applications in PCB.
• To be applied with card ejectors.
• RCB range to be checked to more about its compatibility.