Measurement Gauges & Fittings #2444213

SURFACE PROFILE GAUGES

Elcometer 224 Digital Surface Profile Gauge

Provides the very latest in surface profile measuring technology for measuring profile on either flat or curved surfaces; and is available with or without memory and Bluetooth. Elcometer surface profile probes are supplied with a glass zero plate, calibration test foils (nominal values 125m (5.0mils) & 508m (20mils) and an Elcometer Test Certificate.

Feature :

User Friendly: Large buttons ideal for gloved hands; Easy to use menus in multiple languages; High and low reading limit indicators
Accurate: Measurement capability to 5%
Tough: Dust and water resistant rugged design equivalent to IP64; Integral or separate probes measure profiles up to 500m (20mils) on flat or curved surfaces
Efficient: Fast reading rate of 50+ per minute; Time and date stamped measurements; Accurate, immediate and repeatable results; High contrast colour LCD with Auto rotating display and Power-save mode with tap awake feature; Review batch data or last 20 readings in a graph format

Elcometer 124 Thickness Gauge

Ideally used to measure the peak-to-valley height of a surface profile moulded in the Elcometer 122 Testex Replica Tape.

Elcometer 122 Testex Replica Tape

Designed to provide a permanent mould of the surface profile, which can then be measured using a thickness gauge. It consists of foam with a non-compressible backing. The foam side is rubbed into the surface providing a permanent mould of the peak-to-valley profile. The profile of the surface can then be measured using the Elcometer 124 Thickness Gauge.

The Testex Tape is available in 5 grades for different surface profile ranges:

Coarse Minus (C-) Tape for 12-25m (0.5-1.0mils) - not used in blast profiles
Coarse for 20-38m (0.8-1.5mils) profiles
Average of Coarse and X-Coarse Tape for 38-64m (1.5-2.5mils) profiles
X-Coarse (XC) for 64-115m (2.5-4.5mils) profiles, and
X-Coarse plus (XC+) for profiles between 115-127m (4.5-5.0mils) ***There are 50 tests in each Replica Tape roll.

TQC FTG2000 Film Thickness Gauge

This is a high precision film and foil thickness gauge, especially developed for measuring so-called "replica tapes" as Testex, used mainly to measure the surface profile. The TQC film thickness gauge operates completely according to "ISO 8503-5 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - part 5: Replica tape method for the determination of the surface profile." As described in this standard the closing force is 1, 5 N. The gauge has to have an accuracy of 5 micron and a resolution of 1 micron.

The large clear display makes it easy to read the measurement under all conditions. Values can be displayed in either microns or inches.
To minimize the influence of bodyhand temperature the gauge is mounted detached from the holder.

BRIDGE CAM - WELD SIZE - FILLET

Weld Measuring Gauges

Weld measuring gauges permit you to accurately check welds of varying sizes quickly and easily. The Welding gauge is an essential tool for rapidly checking the dimensions of weld preparations, butt welds and fillet welds.