Electronic Components #366614

we are offering standard arc welding rectifier. the performance of our standard arc welding rectifier is convincing, and thus it is high in the demand in the global industry. the company is the foremost standard arc welding rectifier (200-1200 amps & above) manufacturer, exporter, and supplier in dubai. easeweld esr series standard arc welding rectifier is fabricated as per is-4559, can be a permanent feature of a workshop in context to reliability, low running cost, easy maintenance and excellent quality.
known for

• field proven
• rugged construction
• economical
• easy to maintain

salient features

• compact, elegant, sturdy & drip proof body construction
• powder coated body, mounted on wheels for portability
• forced air cooled with heavy & continuous duty fan
• class of insulation 'h'
• three phase hermitically sealed silicon diodes for full-wave rectification & consistent current with minimum ripples
• three phase transformer for balanced load at input side
• stepless current regulation with transductor control
• liberally designed choke to minimize spatter & enhance metal loss.
• minimum & maximum current are available in 2 ranges low/high just by rotary change over switch or change over strip provided with overlapping

highly compatible dc powder sources for

• smaw (shielded metal arc welding)
• gtaw (gas tungsten arc welding)
• saw (submerged arc welding)
• air carbon arc gouging (acag) / plasma cutting

esr advantages

• low power consumption due to high quality materials utilized
• can withstand ambient temperature, acidic * off shoric weather conditions
• double operators, if connected in series can be used as plasma cutting source, to cut various metal up to 25 mm & above / both the operators access at different current in different various processes
• a remote current regulation facility is an additional advantage
• built in protection against hf surges
• higher open circuit voltage for easy are striking with any electrode
• excellent arc stability even for longer welding cable
• minimum spatter, hence higher recovery per electrode
• esr series arc welding rectifiers are suitable for manual are welding particularly for the welding of particularly for the welding pipes in all positives where welds of high radiographic standard are required
• output minimum, current is less and it's useful for thin sheets argon arc welding
• mild steel at sites where ac welding power may be unsuitable

optional

• remote current regulation housed in elegant metal box with cable
• ammeter & voltmeter with matching shunts

technical specifications
modelunitesr 300esr 400esr 600input voltage/phase/frequencyv/ph/hz380/440/3/50input current - s/opamps.324064input current - d/opamps.6080-weld. current rangeamps.20-30030-40060-600max. hand weld. current at 60% duty cycle.amps.300400600open circuit voltagevolts.808080max. power rating - s/opkva223045cooling-forcedair-insulation-hhhdimension (lxwxh)----single operatormm700x600x650700x600x800750x675x800double operatormm950x675x850950x675x850-weight----single operatorkgs.290325390double operatorkgs.425475-
note : in view of continuous development specifications subject to change without prior notice

we are offering multi operated rectifier. the company offers the efficient multi operated rectifier. our multi operated rectifier is available in 200 amps to 600 amps and above. we are the chief multi operated rectifier manufacturer, exporter, and supplier in dubai. this multi operated rectifier has light weight remote current control regulator. thyristorised controlled arc welding multi operated rectifier is developed by easeweld, using solid state circuitry ensures ideal welding results. it can be easily operated by semi-skilled welder.
used for

• manual metal arc welding (mmaw) of various metals
• tig welding of s.s., m.s., copper, titanium, tantalum and alloy steel
• thin sheets of above metals can be tig welded
• submerged arc welding (saw) of different metals

easeweld et advantages

• low power consumption due to best quality of materials used
• hot start facility for easy arc striking with all types of electrodes
• pcb with plug-in system for easy and speedy replacement and circuit inspection just by opening the panel door
• line voltage compensation up to + 10% of variation
• can withstand ambient temperature, acidic & off shoric weather conditions
• minimum spatter, hence higher recovery per electrode
• available in single/multi operators. all operators can independently work with different processes at different current setting
• anti-stick facility is a standard feature
• a suitable filter choke ensures low ripple level to give high quality welding
• these units incorporate a unique thyristor control system for higher reliability, fast response & minimum power consumption
• each operator reciprocates independently on-off facility & remote current regulation

salient features

• esthetic looks, elegantly designed, compact sturdy construction with drip proof covers
• class of insulation 'h' (fibre glass)
• error/distortion free digital display for amp/volt reading
• low weight handy remote control with hot start facility
• filter circuit for protection of diodes and thyristors
• built in protection against high frequency short circuit
• forced air cooling for high efficiency
• three phase transformer to balance input supply
• available to use with 60 hz also. especially for off-shore and on the ship building / site construction
• ideal power source for fabrication & repair of nuclear power plants, chemical process plants, refineries, offshore & defense equipments, steel plants, thermal power plants, mining equipments, pipe lines, etc.

technical specifications
modelunitet-200et-300et-400et-600input voltagevolt380-440380-440380-440380-440phase-3333frequencyhz50505050input current-s/opamps.24324064input current - d/opamps.-60--weld current rangeamps.5-20010-30010-40010-600max. hand weld. current at 60% duty cycleamps.200300400600max. hand weld. current at 100% duty cycleamps.110230310460open circuit voltagevolts80808080max. power rating. s/opkva12223045max. powr rating - d/opkva-4057-coolingforced airinsulation-hhhhdimensions (lxwxh)-single operatormm625x475x550700x600x650700x600x650750x675x800double operatormm-950x675x850950x675x850-weight:single/double operatorkgs.250290/425325/475390
note : in view of continuous development specifications subject to change without prior notice

we are offering single operated rectifier. the company offers the efficient multi operated rectifier. our multi operated rectifier is available in 200 amps to 600 amps and above. we are the chief multi operated rectifier manufacturer, exporter, and supplier in dubai. this multi operated rectifier has light weight remote current control regulator. thyristorised controlled arc welding multi operated rectifier is developed by easeweld, using solid state circuitry ensures ideal welding results. it can be easily operated by semi-skilled welder.
used for

• manual metal arc welding (mmaw) of various metals
• tig welding of s.s., m.s., copper, titanium, tantalum and alloy steel
• thin sheets of above metals can be tig welded
• submerged arc welding (saw) of different metals

easeweld et advantages

• low power consumption due to best quality of materials used
• hot start facility for easy arc striking with all types of electrodes
• pcb with plug-in system for easy and speedy replacement and circuit inspection just by opening the panel door
• line voltage compensation up to + 10% of variation
• can withstand ambient temperature, acidic & off shoric weather conditions
• minimum spatter, hence higher recovery per electrode
• available in single/multi operators. all operators can independently work with different processes at different current setting
• anti-stick facility is a standard feature
• a suitable filter choke ensures low ripple level to give high quality welding
• these units incorporate a unique thyristor control system for higher reliability, fast response & minimum power consumption
• each operator reciprocates independently on-off facility & remote current regulation

salient features

• esthetic looks, elegantly designed, compact sturdy construction with drip proof covers
• class of insulation 'h' (fibre glass)
• error/distortion free digital display for amp/volt reading
• low weight handy remote control with hot start facility
• filter circuit for protection of diodes and thyristors
• built in protection against high frequency short circuit
• forced air cooling for high efficiency
• three phase transformer to balance input supply
• available to use with 60 hz also. especially for off-shore and on the ship building / site construction
• ideal power source for fabrication & repair of nuclear power plants, chemical process plants, refineries, offshore & defense equipments, steel plants, thermal power plants, mining equipments, pipe lines, etc.

technical specifications
modelunitet-200et-300et-400et-600input voltagevolt380-440380-440380-440380-440phase-3333frequencyhz50505050input current-s/opamps.24324064input current - d/opamps.-60--weld current rangeamps.5-20010-30010-40010-600max. hand weld. current at 60% duty cycleamps.200300400600max. hand weld. current at 100% duty cycleamps.110230310460open circuit voltagevolts80808080max. power rating. s/opkva12223045max. powr rating - d/opkva-4057-coolingforced airinsulation-hhhhdimensions (lxwxh)-single operatormm625x475x550700x600x650700x600x650750x675x800double operatormm-950x675x850950x675x850-weight:single/double operatorkgs.250290/425325/475390
note : in view of continuous development specifications subject to change without prior notice