FLOW ZONE TECHNICAL SERVICES

Dubai, United Arab Emirates

1SNEN 853 1SN - SAE 100 R1ATBraided Hoses- 2SNEN 853 2SN - SAE 100 R2ATBraided Hoses- 4SPEN 856 4SP MultiSpiral Hoses- 4SHEN 856 4SH MultiSpiral Hoses- EN 856 R12- SAE 100 R12 MultiSpiral Hoses- EN 856 R13 - SAE 100 R13 MultiSpiral Hoses-EN 856 R15 -SAE 100 R15 MultiSpiral Hoses- SAE 100 R3, R5, R5R and R6 Hoses- Water BlastingHoses- Steam Cleaner Hoses

Hydraulic HoseFittingsConsists Of:

-American Male Pipe - NPT / NPSM-British - BSPP / BSPT-JIC 37Deg Flare-SAE 45Deg Flare-SAE Code 61 & 62 Flanges-ORFS-UN O-ring-Metric DIN 2353-Komatsu-Metric Gaz-Banjo BSP / Metric-Karcher-O-ring Spigot-Stand Pipe - Metric / Imperial-Autoclave

Carbon Steel, Brass and SS Adaptors in BSP, NPT, JIC, JIS Metric, GAZ, UN, SAE and manyother threads- HP Ball Valves 1/4" to 2" NB BSP and NPT- HP Needle Valves 1/4" to 1" NB NPT- SAE O-ring Flange Blocks and Clamps 1/2" to 4" NB- O-rings and Dowty Washers 1/8" to 2" and 10mm to 55mm- Whip Checks for HP Hose Safety- Metric & Imperial Tube Clamps 6mm to 324mm OD- Spiral Hose Guard in Galvanised Steel and Plastic- Silicon Fire Protection Sleeve, Blanket and Tapes- 2 & 4 Face Pressure Gauges- ISO7241-1 A Interchange " to 1" NB of Quick Release Couplers- ISO7241-1 B Interchange in Steel, Stainless Steel and Brass " to 2" NB Quick ReleaseCouplers- Flat Face Couplers - HTMA interchange Quick Release Couplers- Oilfield and Offshore Couplers- Extra High Pressure Couplers- Pneumatic Interchange Couplers

- DIN 2353 Compression Unions, Adaptors and Reducers from 6LL to 42L and 6S to 38S Tubeseat.

- High Pressure Seamless Cold Drawn ST37.4 (Normalised) Tube to DIN 2391 Grade C from 6mm to42mm outside

The Range Of Thermoplastic Hoses Consists Of:

- DN5 to DN25 -SAE100R7 application- DN6 to DN12 - SAE100R7 Twin application- DN6 to DN20 - SAE100R8 application- DN6 to DN12 - SAE100R8 Non-conductive application- DN5 to DN25 - 1 wire braided TP hose-perforated for HP gas- DN6 to DN12 - 1 wire braided TP hose Twin application- DN6 to DN12 1 & 2 wire braided TP hose Airless Paint Spray application.-TP hose High Pressure Breathing Air Cylinder Charging application.- EHP Thermoplastic Hoses for Lancing applications- EHP Thermoplastic Hoses for Hydraulic Tools- EHP Thermoplastic Hoses for Water Jetting and Hydrostatic Test- EHP Thermoplastic Hoses for Water Cutting and Demolition- Stainless Steel Braided Smooth bore PTFE HP hose " to 1" ID- Stainless Steel Braided Convoluted bore PTFE hose " to 2" NB- End fittings in Carbon Steel and Stainless Steel 316L

Our Thermoplastic, HP Jetting & PTFE Hoses can be used for:

Stainless Steel Metallic Hoses, Bellows and Expansion Joint

The Range Of Products AvailableConsists Of:
- NB - 8 NB SS321 Hose with SS304 Braid- NB - 6 NB SS316L Hose with SS304 Braid- NB to 3 NB Ultra-Flexible SS321 Hose with SS304 Braid for higher pressures

- Exhaust Bellows 1 to 4 Bar WP from 50mm to 1200mm NB

- Expansion Bellows for HVAC and Industrial Applications 16 to 25 bar WP from 25mm to 350mm NB

- Rubber Expansion Joints / Bellows

- Standard materials supplied are SS 321 (Other materials are available on request)

The above Hoses/Bellows are supplied with virtually any end fitting termination.

Our Stainless Steel Metallic Hoses, Bellows & Expansion Joints can be used for:

Our Standard Industrial Hoses Consists Of:

- Air Hose 10bar and 20bar working pressure from " to 2" ID- Water Suction/Delivery Hose 10bar working pressure from 1" to 6" ID- Oil Petroleum Suction/Delivery Hose 10bar working pressure from 1" to 6" ID- Petrol delivery hose 10bar working pressure " to 1" ID- Steam hose 18bar working pressure from " to 2" ID- Low Pressure Breathing Air hose 30bar working pressure ID- High Pressure Breathing Air hose 413bar working pressure ID

Our Large Bore Hoses Consists Of:
- Water Suction/Delivery Hose 220PSI working pressure with 4:1 SF from 1" to 8" ID- Water Delivery Hose 600PSI working pressure with 4:1 SF from 2" to 6" ID- Cement Delivery Hose 150PSI working pressure with 4:1 SF from 2" to 6" ID- Acid and Chemical Hose 235PSI working pressure with 4:1 SF from 1" to 4" ID- Concrete Pumping Hose 1230PSI working pressure with 4:1 SF from 3" to 5" ID- Marine Dock Handling Hose 225PSI working pressure with 4:1 SF (BS EN ISO1765:1997 formally BS1435: Part 1 1987) from 3" to 8" ID- Multi-Purpose Oil/Mud/Cement/Fuel Suction/Delivery Hose 300PSI working pressurewith 4:1 SF from 3" to 8" ID- Multi-Purpose Oil/Mud/Cement/Fuel Delivery Hose 300PSI working pressure with 4:1SF from 2" to 8" ID- Oil/Water Delivery Hose 600PSI working pressure with 4:1 SF from 3" to 8" ID

- Sea Water Delivery Hose 750PSI working pressure with 3:1 SF from 4" to 8" ID

Our Special MTO Hoses Consists Of:

- Dock Loading Hoses- Bunkering Hoses- Floating Roof Drain Hoses- Seawater Dump Hoses- Compensator Hose- Floating Discharge Pipeline Hoses- Big Bore Mining Hoses

Comprehensive ranges of industrial hose fittings are available using new generation Internally Swaged Coupling programme which includes:
- NPT Male Ends- Hammer union (Fig 100/200/206/400/602 etc) Butt welded or threaded ends.- ANSI/ASA150/300/600 Flanged Ends- PN10/16/25/40 Flanged Ends- JIS 5/10/20K Flanged Ends- BS Table D/E/F Flanged Ends
The fittings for flanged ends are available in Weld Neck (WN) and Slip on (SO) type RF in Carbon Steel or Stainless Steel.
All hose assemblies are custom made to the end user requirements, tested and certified to 1.5 W.P. unless otherwise specified.
Our Industrial, Large Bore and Composite Hoses can be used for:

Ship Bunkering & Tanker Drop Hoses

• Gas, Chemical, Acid & Cryogenic Hose
• Sea Water And Bulk Delivery Hose
• Large Bore High Pressure Hose
• Aviation Fuelling Hose
• Breathing Air and Safety Systems