FLUID TECH DUBAI

Skid mounted and trailer mounted self-priming de-watering pumps coupled with diesel engine or electric motor are available depending on the site requirement. 4” and 6” models are more readily available as these pump sizes are the industry standard. These pump sets are normally supplied with quick connectors, with re-inforced rubber suction hoses and layflat discharge hoses so the installation at site is quickly achieved.  

Development, design, build and sales of high pressure positive displacement pump sets in diesel engine or electric motor driven configurations to cater to the requirements of Marine, Oil & Gas, Petro Chemical and General Industrial sectors.   Fluidtech  is the authorized distributor of Pratissoli pumps in the GCC, for their range of high pressure triplex plunger pumps, accessories and spares. High pressure pump units are offered as skid mounted or trailer mounted options depending on the site requirement. Pressure ratings of these pumps starts from 50 bar to 1400 bar (725 psi to 20000 psi) and the discharge flows range from 6 lpm to 480 lpm (1.6 US gpm to 126 US gpm). The units are very compact in size and are suitable for most of the industrial cleaning and heavy duty water jetting applications.   Hydro jetting units are available for single gun or double gun operations with unloader valve and dry shut gun system. The dry shut gun configuration prevents dumping water at site while the trigger is released and thus avoiding wastage of water. This is especially important when working inside tanks and enclosed areas.   A range of skid mounted hydro jetting units with experienced hydro jetters and pump technicians are available on hire basis to meet any immediate requirement.   Pump skids can be fitted with chalwyn valve, spark arrestor and battery isolator to meet the semi-hazardous safety standards of oil and gas field applications.   Some of the latest additions to the Pratissoli range of pumps include Piston Pump Series M Line which have been designed to handle drilling fluids, muds, slurries and dense mixtures for a variety of applications in the Mining, Chemical, Oil & Gas Industries. Performances range from 35 lpm to 396 lpm (9.3 US gpm to 105 US gpm) and pressures up to 90 bar (1300 psi).   Recycled Fluid Series Pumps are suitable for charged water with particles size up to 200 micron and up to 20% concentration in the water. Due to the special packings the pump can run dry without any damage for up to 30 minutes. Performances range from 100 lpm to 480 lpm (26 US gpm to 126 US gpm) and pressures up to 250 bar (3600 psi).   Stainless Steel 70 Series version AISI 316L pumps and AISI 420 pumps with performances ranging from 30 lpm to 170 lpm (8 US gpm to 45 US gpm) and pressures up 250 bar (3600 psi).   Stainless Steel N Series Pumps have duplex ASTM block style manifolds. Performances ranging from 74 lpm to 388 lpm (19 US gpm to 102 US gpm) and pressures up to 400 bar (5800 psi).   Please contact us for your specific pump performance requirements.   Application s   Marine growth removal Surface cleaning Scrabbling of concrete surfaces Boiler cleaning Heat exchanger tube cleaning Drill pipe cleaning Drainage cleaning Tank cleaning High pressure pump set features     Diesel driven and electric driven options Single gun and double gun congurations Triplex pump with fully ceramic plungers Direct coupling through gear box Built-in fuel tank for 12 hours operation On-board water tank with low water cut out Stainless steel/powder coated control panel Compact and heavy duty design Un-loader valves on some models ATEX certied models are available

An extensive and reliable selection of water jetting accessories are available for surface preparation and tube bundle cleaning. Water jetting hoses rated from 10000 psi to 46000 psi (690 bar to 3170 bar) working pressures. Dry shut style water jetting gun with un-loader valve, dump style water jetting gun rated from 15000 psi , 20000 psi and 40000 psi (1000 bar, 1400 bar and 2760 bar) working pressures. Complete set of hydro-blasting suits suitable for pressures up to 40000 psi (2760 bar), flow divider valves, high pressure in-line flow meters, UHP accessories such as tumble boxes, external compensation valve (ECV), 40000 psi lances and spares such as seals, back up rings, swivel seals, brass buttons, nozzle carriers, sapphire nozzles etc are available, as well as standard fan and round stream jets.

High pressure cold and hot water pumps are available for general cleaning and many industrial applications. The pump sets can be self-contained or skid mounted, coupled with various types of electric motors or petrol/diesel engines.   The hot water pumps are suitable up to 85 Degree C water temperature. The materials of construction are pump body and cover in die-cast aluminum alloy. Pump shaft in pressed high strength steel. One piece ceramic pistons and pump head in nickel plated brass.

This is a surface treatment process in which a stream of high pressure water is mixed with abrasive particles which are directed on to the surface to be treated. This method is used to remove paint, metal scales, rust, salt and other contaminants from the surface. The velocity of the water jet along with hardness, density, toughness and particle shape of the abrasives will create a surface prole to provide a suitable surface for painting. Fluidtech oers high pressure water jetting pump sets with venturi nozzles which are mounted on to the water jetting guns which mixes water with the abrasives. This method is called “wet sand blasting” which oers a pollution free water/abrasive operation.

Fluidtech offers an extensive range of high pressure triplex plunger pumps with pressure regulating valves and related accessories for pressure testing. These HP pump units are available in skid or trailer mounted versions with diesel engine or electric motor driven options. Units can be operated from 0 to the maximum pressure rating of the pump and is ideal for hydro static pressure testing of cross country pipelines, under water pipelines, pressure vessels and storage tanks.