Our Products
Petro Tar Co.is a Manufacture, Supplier and Exporter of all grades of Oxidized Bitumen or Blown Asphalt in Melt able Polyamide bags (25 Kg), Carton Box (25 Kg), Kraft Bags (25 Kg), Drums (25 Kg)
What is Oxidized (Blown) Bitumen?
Blown bitumen grades or Oxidized Bitumen are produced by passing air through the penetration grades. This process gives the bitumen more rubbery properties than its original formula and they are simply harder bitumen. Hard bitumen under controlled temperature conditions is widely used as an anti-slip layer compound in the piling industry, for manufacture of roofing felts, the roofing and waterproofing industries, for sound dampening felts and under carriage sealant in the automotive industry, electric cable joint protection, joint filling compound, sealant compound and many others. Also used in sealing saw cuts and joints where expected movements are minimum. It is also used in the manufacturing of bituminous marine mastic for the oil & gas pipeline joints.
The most popular grades are; grades 95/25, 85/25, 90/40, and 115/15. We are also capable of producing other grades of Blown Bitumen upon request by our customers. Oxidized Bitumen high softening temperatures qualify them as excellent sealant for prevention from bleeding in high temperature applications. Blown Grade Bitumen shall be broken up into small pieces (for blown grade in molded cake form) and heated slowly to the application temperature of 220C to 230C. Oxidized Bitumen is predominantly used in the piling industry as an anti slip compound for the manufacture of under carriage sealants in the automobile industry. It is also used as a sealant compound, as a joint filling compound apart from being used in the manufacture of roofing felts and sound dampening felts. Further, Oxidized Bitumen is used in the manufacture of bituminous marine mastic, which is required for the oil and gas pipeline joints. This Oxidized Bitumen is available in different grades like 95/25, 85/25, 75/25, 90/40 and 115/15. Oxidized is also capable of producing other grades of Oxidized Bitumen according to the specifications of individual clients
Some of the major advantages of Oxidized Bitumen are that it is completely water resistant, highly flexible and durable. Further, it is chemically very stable. Oxidized bitumen is a very flexible compound that is not only chemically stable but also a very durable compound apart from being completely water resistant. Lastly, Oxidized Bitumen has some very prominent technical advantages that makes it a very sought after compound in various applications.
How to produce Oxidized Bitumen (Blown Bitumen)?
Production process:
1.Bitumen heating to 230-270 C
2.Transferring melted bitumen to blowing towers
3.Blowing air to bitumen
4.Cooling melted bitumen with water
5.Packing
The procedures of producing bitumen are as follows:
2. Discontinuous blowing procedure
These two procedures are done by other two procedures named catalysis and anticatalysis. Catalysis means adding some chemical material during the process In order to decrease blowing reaction time.
For the following reasons:
Ease and simplicity in changing blowing condition and have production with different grades as a result.
Ease in generating the unit.
Ease in technology and also low expense in investment.
The discontinuous producing procedure is chosen.
Technical point and operating conditions are as follows:
The production process is as follows:
The producing operation of oxidized bitumen mainly includes tank loading different steps, bitumen blowing, condenser external gases and packing. So in the beginning the loose bitumen shipped to the plant by tanker is transferred to the raw material store tanker. In order to transfer the bitumen easily to the blowing tower the burner is contrived at the bottom of the store tanker to heat them. It is necessary to say that if the blowing towers are empty, hot bitumen can be uploaded directly to them and blowing operation start.
Since the volume of bitumen increases as a result of blowing and it may overflow, the blowing tower is filled up to 70 %.
Air injection is usually done when the temperature of material reach to 190-230 C.
For gradual heating and also pipes filling with the air is entered from the top of the tower and at the bottom the bitumen dispread monotonously in phase via nozzel then oxidation is done accordingly and the light molecule, volatile gases and steam are emitted from the top of the tower.
Blowing operation is done in temperature range 215-290C but the suitable temperature is between 265 to 270C. The needed heat is provided by burner contrived at the bottom of the tower. The bitumen reaction is calorific so in order to prevent the explosion danger resulted from temperature increasing, the temperature can be controlled by water injection, burner extinguisher and air amount reducing.
Blowing end point is usually signified by sampling from tower and bitumen properties testing. The blowing operation stops when oxidized bitumen reaches to specified properties. After this in order to fix the final point and depolymerization bitumen got in high temperature. It is necessary to be transferred to store after packing and presented to sale.
It is necessary to say that the produced gas and steam entered the condansor through the pipe fixed at the top of the blowing tower. In this stage the bad smelling gases and oily and volatile parts are separated from then transfer to sewage accompanied with water. Other unseparatedgasparts is emitted from top of the condenser then transfer to furnace and burned there. After cooling the blowing oven and reaching them to 150-160C, all the content of blowing oven which is hard bitumen is able to be loaded and packed. Because of the liquid height in blowing tower, oxidized bitumen is transferred by specific gravity and there is no need to use pump. Packing is done in two sections and in 220 liter drum and 35 kg carton. For fast operation (preventing from cooling & hardening) in every section several taps are fixed so that it can fill specific drum and carton with bitumen in same time.
Oxidized Bitumen (Blown Asphalt)
Description:
Oxidized bitumen is produced by either continuous or Staggered Blowing Process. Heated Penetration Grade bitumen under controlled environment is blown with air which controls the oil content in the bitumen while it oxidized. The different grades for suited applications produced are designated by two numbers to indicate the mid-points of their softening point and penetration ranges.
Application:
Oxidized Bitumen has a wide variety of industrial applications
Product Benefits
PROPERTY |
GRADE |
|||||||
R10/20 |
R85/25 |
R85/40 |
R90/15 |
R90/40 |
R95/25 |
R115/15 |
R110/30 |
|
Specific gravity@ 25/25˚ C |
1.00-1.06 |
1.05 approx |
1.05 approx |
1.05 approx |
1.05 approx |
1.05 approx |
1.00-1.06 |
1.05 approx |
Penetration@ 25˚C |
10-20 |
20-30 |
35-45 |
10-20 |
35-45 |
20-30 |
10-20 |
10-25 |
Softening point ˚C |
90 Min |
80-90 |
80-90 |
85-95 |
85-95 |
90-100 |
110-120 |
>100 |
Ductility@ 25˚C |
2 |
1.5 Min |
3 |
1.5 Min |
5.5 Min |
1.5 Min |
2 Min |
2 Min |
Loss on heating (wt)% |
0.5 |
0.2 Max |
0.5 Max |
0.2 Max |
0.2 Max |
0.2 Max |
0.2 Max |
0.2 Max |
Flash point ˚C |
230 Min |
230 Min |
230 Min |
230 Min |
230 Min |
230 Min |
230 Min |
230 Min |
Solubility in ˚CS2 (wt)% |
99 |
99 Min |
99 Min |
99 Min |
99 Min |
99 Min |
99 Min |
99 Min |