Post Buy Requirement
GM
ajman, United Arab Emirates
Add Review

Other Products / Services

GI Roof Sheet


Ghosh Metal Industries Metal roofing profileis also named steel roof sheet, raw material is pre-painted hot dipped galvanized steel sheet, used as popular structuralmetal roofing materials and pre-painted aluminium coil sheet.
Thickness: 0.30 mm to 0.90 mm
Standard Width after corrugation: 1000 mm
Length: Subject to customer choice


With RAL Color of any as customer choice like RAL 9002 Off White, RAL 1001 Beige, RAL 5012 Light Blue, RAL 5010 Dark Blue, RAL 5002 EMMAR Blue, RAL 7046 Dark Grey, RAL 7036 Grey, RAL 7037 Grey, RAL 1014 light beige, RAL 1015 Ivory, RAL 9003 White, RAL 9010 Pure White, RAL 3002 RED, RAL 3020 RED, RAL 2004 Orange, RAL 7015 Grey, RAL 6038 Green, RAL 6029 Light Green, and more.


Ghosh Metal offerings high grade trapezoidal cladding sheets, which are widely installed for their attractive designs and robustness in buildings.


These are built using high grade metals, such as stainless steel, copper, aluminum, zinc, bronze and titanium. The sheets come with accurate dimensions and are easy to install


Profile design we have following cover width:
35/200 mm
45/250 mm x 1000 mm
45/150 mm x 900 mm


The Advantage of Metal and Aluminium Roof Sheet:
(1) Easy installation
(2) High strength
(3) Low in costs
(4) Durable
(5) Nice appearance


Below is the required accessorises for the roof profile and sandwich panel sheet for shed and ware-house, industrial roof as top ridge, bottom ridge, rain gutter, vally gutter, and flashing corner.


GHOSH METAL has new corrugation line in UAE for S Type / waves type corrugation (Galvanized Corrugated) sheet with 16 to 20 mm. Waves and pitch waves distance 75 to 76 mm with cover width after corrugation 780 mm 900 mm 1000 mm x Length we can cut subject to our customer choice.
Thickness: 0.28 mm (Gauge32 to Gauge20) to 0.90 mm


Galvanized Steel used in the profile sheet is supplied from Ghosh Metal Ajman.

View Complete Details

Swimming Pool Heat Pump

Swimming Pool Heat Pump supplier UAE Dubai, yes, we are one of the fast growing supplier of heating and cooling system for swimming pool water in Dubai, Abu Dhabi, UAE and we have stocks ranging from 5TR, 7TR, 8TR, 10TR subject to swimming pool size and water storage in the pool.
View Complete Details

Gi Decking Sheet

Ghosh Metal Industries LLC High Quality Decking Sheet produce by Hot Dip Galvanized Steel Coil thickness 0.90 mm to 1.2 mm Subject to our Valuable customer choice. For Our High Quality Galvanized GI Decking Sheet, maintain the Grade ASTM A653, Zinc 275 GSM, Regular Spangle, and Origin: India / Korea. Ghosh Metal Galvanized Decking Sheet 45/150 mm is very famous in UAE and Other GCC Countries for the Quality.


Ghosh Metal Industries LLC Galvanized High Strength Roof Decking Sheets support the roof elements by providing exceptional strength and strong structural platform. In addition to this, an effective spanning of the roofs can be greatly achieved by using these sheets for roof decking. With these decking sheets a strong solid base can be provided in any situation without using purlins or framing underneath the roofing. The Ghosh Metal Industries - Decking Sheet is having the Features like Non-Fragile, Excellent design , Weather proof , Have recyclable content, Greater span capability and Dimensional stability of these sheets are excellent. Roof Decking Sheets are excellent materials to cover the roof and are capable to withstand various types of loads, therefore superior quality of raw materials are only used to design these sheets. Materials like steel, aluminum or the alloys are important base materials for a robust construction. For offering excellent insulation the metal sheets are sandwiched between insulating polymers like polyurethane and polystyrene., These are following design considerations that we put to manufacture these sheets, Adhesion, fixing or ballasting are notable design factors for long lasting capability , Materials chosen are fire proof , Well designed to bear extra loads, Condensation risk is also the designing factor , Designed to provide better insulation , Able to ful fill the acoustic requirements , Whole design is compact and light in weight, Designed meticulously in conjugation with the aesthetic importance

View Complete Details

PU From Sandwich Panel

Ghosh Metal Industries LLC, based in Ajman, Dubai, United Arab Emirates has a sandwich panel factory which is used mainly for Roof and Wall.


Sandwich Panel dimension:

Top Skin:
GMI 35/200 mm and GMI 45/250 mm


Bottom Skin:
Low Rib Profile of Galvanized Mill Finish,
Galvanized Pre Painted
AluZinc
Color coated steel sheet
Mill finish aluminium
Color coated Aluminium Profile
GI Polyester Coated
Aluminium Polyester Coated
GI PVDF Coated
Aluminium PVDF Coated
Alu Zinc PVDF and Polyester Coated Alloy Steel
Aluminium Foil as bottom


Profile used:
Galvanized Mill Finish
Galvanized Pre Painted
AluZinc
Color coated Steel Sheet
Mill Finish Aluminium
Color coated Aluminium Profile
GI Polyester Coated
Aluminium Polyester Coated
GI PVDF Coated
Aluminium PVDF Coated
Alu Zinc PVDF
Polyester Coated Alloy Steel


Thickness:
0.40 mm to 0.90 mm of the Top and Bottom Sheet
Effective Width of the Sandwich panel 1050 mm with Covering Width of the sandwich panel 1000 mm The length of sandwich panel might go up to 12 mt
Customer can also order customized sandwich panel roof / wall with their detail and price these panel will be manufactured and supplied all over Dubai, Abu Dhabi, UAE, Oman, Saudi, Qatar and Africa too.


Grade:
Aluminium Alloy 3105, 3003, 1100, 1050
Mill Finish and Aluminium Prepainted color coated
Temper H16
Galvanized Steel Coil As per ASTM A653
Lock forming quality with Zinc coating from 180 to 275 GSM, or G60 to G90
Top Paint: 5 Micron Primer + 20 Micron paint (5+20 Micron)
Bottom Coat: 5 Micron Primer + 7 Micron Paint (5+7 Micron).


Alu Zinc ASTM A792 with Zinc Coating Z80 to Z220
Top Paint: 5 Micron Primer + 20 Micron paint (5+20 Micron)
Bottom Coat: 5 Micron Primer + 7 Micron Paint (5+7 Micron)


Sandwich Panel Roof/Wall RAL Colour

RAL 9002 Off White
RAL 1001 Beige
RAL 5012 Light Blue
RAL 5010 Dark Blue
RAL 5002 EMMAR Blue,
RAL 7046 Dark Grey
RAL 7036 Grey
RAL 7037 Grey
RAL 1014 Light Beige
RAL 1015 Ivory
RAL 9003 White
RAL 9010 Pure White
RAL 3002 RED
RAL 3020 RED
RAL 2004 Orange
RAL 7015 Grey
RAL 6038 Green
RAL 6029 Light Green and more

View Complete Details

Decking Sheet


Ghosh Metal Industries LLC high quality decking sheet produce by hot dip galvanized steel coil.
thickness: 0.90 mm to 1.2 mm and subject to our valuable customer choice.



For our high quality galvanized GI decking sheet, we maintain:
Grade: ASTM A653, Zinc 275 GSM, Regular Spangle.
Origin: India / Korea



Ghosh Metal galvanized decking sheet 45/150 mm is very famous in UAE and Other GCC Countries for the quality.



Ghosh Metal Industries LLC Galvanized high strength roof decking sheets support the roof elements by providing exceptional strength and strong structural platform.



In addition to this, an effective spanning of the roofs can be greatly achieved by using these sheets for roof decking. With these decking sheets a strong solid base can be provided in any situation without using purlins or framing underneath the roofing.



The Ghosh Metal Industries Decking Sheet has features like non-fragile, excellent design , weather proof , made of recyclable content, greater span capability and dimensional stability of these sheets are excellent.



Roof Decking Sheets are an excellent material to cover the roof and are capable to withstand various types of loads, therefore superior quality of raw materials are only used to design these sheets. Materials like steel, aluminum or the alloys are important base materials for a robust construction. For offering excellent insulation the metal sheets are sandwiched between insulating polymers like polyurethane and polystyrene. These are following design considerations that we put to manufacture these sheets, adhesion, fixing or ballasting are notable design factors for long lasting capability.



Materials chosen in these are fire proof. Well designed to bear extra loads, condensation risk is also a main factor while designing these all to provide better insulation, full fill the acoustic requirements, compact and light in weight and designed meticulously in conjugation with the aesthetic importance


View Complete Details

Cold Formed Z And C Purlin

In steel construction, the term Purlin typically refers to roof framing members that span parallel to the building eave, and support the roof decking or sheeting. The purlins are in turn supported by rafters or walls. Purlins are most commonly used in Metal Building Systems, where Z-shapes are utilized in a manner that allows flexural continuity between spans.


It is the practice in the steel industry that structural shapes are assigned representative designations for convenient shorthand description on drawings and documentation: Channel sections, with or without flange stiffeners, are usually referenced as C shapes; Channel sections without flange stiffeners are also referenced as U shapes; Point symmetric sections that are shaped similar to the letter Z are referenced as Z shapes. Section designations can be regional and even specific to a manufacturer. In steel building construction, secondary members such as purlins (roof) and grits (wall) are frequently C, Z or U sections, (or mill rolled) C sections.


Cold formed members can be efficient on a weight basis relative to mill rolled sections for secondary member applications. Additionally, Z sections can be nested for transportation bundling and, on the building, lapped at the supports to develop a structurally efficient continuous beam across multiple supports.


Z & C Purlin Specification: ASTM A653, Galvanized Steel Coil Grade 50, SS340, Minimum YS 400 MPA, TS 450 MPA, Regular/Zero Spangle, Origin Korea, India, Saudi Arabia. Thickness: 1.5 mm to 3.5 mm

View Complete Details

Single Sking Roofing Sheet

Galvanized Pre Painted Roofing Sheet to be use for Roof of the Shed and Potacabin
View Complete Details

Galvanized And Stainless Steel Lintel

Ghosh Group, Ajman, Dubai, United Arab Emirates started Galvanized Lintel manufacturing from August 2012.


Ghosh Metal Industries LLC, has a very strong and energetic technical team to process quality production of the GI Lintel.


Propping Galvanized and Stainless Steel lintel is sometimes installed to facilitate speed of construction. It should only be introduced after initial masonry load has been applied to the lintel. When propping a lintel, a horizontal timber plank should be placed along the underside of the lintel and suitable props secured into place at maximum 1220 mm centres.


The Galvanized Steel we use to manufacturing of our GI lintel is ASTM A653, Grade 50, Structural Quality with 275 GSM Zinc Coating. The external GI Lintel Flange 50 mm to 150 mm.


Galvanized and Stainless Steel Lintels should be installed with a minimum end bearing of 151mm, bedded on mortar and levelled along its length and across its width. Point loads should not be applied directly onto lintel flanges. Lintels should have a minimum of masonry 151mm high between the flange and the application level of any form of loading.


Ghosh Metal Industries manufacture GI Lintel, Stainless Steel Lintel, Powder Coated GI Lintel with the


Thickness range 1.5 mm to 4.0 mm
Inner width 153 mm to 203 mm
Length 900 mm to 2200 mm Or
Customized according to our customers requirement


Today Ghosh Group is well known in Dubai UAE Oman Saudi and Qatar for its GI lintel supply to Bahrain, Kuwait, Iraq, Sriya, Jordan etc.,

View Complete Details

Water Chiller

Globe - Electrical Division is engage to assemble, import and supply water chiller for home, villa and industrial use, as well we provide Swimming Pool Chiller Heat Pump for heating and cooling system of the water for swimming pool with automatic adjustable temperature controller.

Our scope of supply water chiller for home and industrial uses start from2TR, 3TR, 5TR, 10TR, 15TR and 20TR.

You can get ready stock with us at our showroom in UAE. The origin and make of our system is from India, Italy and USA.


Our Water Chiler has a cooling capacity ideal for domestic and industrialapplication like Water, Laser Machine, Process Machine, Cooling, Aquarium Water Chilling, Space Application, Milk & Dairy product, Food product, Chemical, Pharmaceuticals, Laboratory, Research, Plastic process, Hydraulic machine, Villas, Hotels and Apartments


GWC high capacity water chilling system equipped is with modern and advance technology which functions according to the heat load of any application. By the use of this technology one can manage the unit capacity in relation to production load variation. If GWGs smart technology observes any peak in the heat load during the 1st stage of operation then it will increase the cooling effect accordingly.
For example, GWC offers an automatic pumped water circulation system that can cool a 2001 Gallon tank of water to a manual adjustable temperature as per the requirement. Once the set point temperature is achieved, GWC unit will shut down automatically and will turn again later to get set temperature.

View Complete Details

Portable Cabins

  • Country of Origin India
  • Size 100x30x24
  • Type Portable Cabins
  • Shape Rectangular
Porta cabin Manufacturer and Supplier in Dubai UAE Oman Saudi Qatar

Ghosh Metal Industries LLC, Ajman, Dubai, United Arab Emirates are one of the top supplier and manufacturers of prefabricated Porta cabin.


This Porta cabins meets the demands in construction sites, security cabins, factories, toll booths and other similar areas where permanent construction is not required and useful.


Ghosh Metal Industries Porta cabin Manufacturer and Supplier in Dubai UAE Oman Saudi Qatar operations are run by our expert who have rich experience in this portable industry sector. The best practice process guidance as well as years of experience provide them to deliver compatible solutions as and when demanded by our customers.


Ghosh Porta cabin is fabricated from hot rolled quality steel duly welded, comprising of base frame, peripheral structure, self draining roof, entry doors and windows (as per our valuable customer requirement). All The corners shall be sufficiently strengthened to facilitate transportation, lifting and placing on site.


Ghosh Metal Porta cabin Manufacturer and Supplier United Arab Emirates porta cabins base frame shall be made of mild steel channel section. The main structural element shall be of 100 mm x 50 mm C channels and cross support of C channels section size 75 mm x 40 mm with Extra Leg.


Ghosh Group Porta cabins side and end frame shall be made out of pressed sections of suitable pillars of high strength.


Exterior wall shall be made up by 12 mm to 20 mm Cement Board / Gypsum Board / MDF board or Flat Sandwich panel top and bottom with Aluminium or GI Pre painted Sheet with 50 to 100 mm PU, subject to our customer request.


The Flooring System of Ghosh Group Porta cabin Manufacturer and Supplier in Dubai UAE Oman Saudi Qatar maintains minimum space on the bottom frame 20 mm thick plywood, bison panel/cement. Fiber board shall be fixed by means of self taping screw.


Roof shall be made out by Single Skin Roof Profile Sheet or Roof Sandwich panel subject to our valuable customer choice, with epoxy paint on galvanized or aluminium subtract.



The interior of Ghosh Group Porta cabin shall be aesthetically finished so as to give custom built appearance with extremely high quality workmanship. All vertically and horizontal corners shall be neatly and smoothly finished with Powder coated aluminium works.


The door shall be of external opening type made out of the same material as wall panels with door closing unit. The construction of the door shall be double skin steel construction with 50 mm thick PU insulation. Aluminum powder coated windows, sliding type shall be provided made of aluminium , 6 mm thick, tinted glasses will be fitted on it.


Portacabin electrical work is always done with high care with the bunk house, provided with electrical wiring suitable for 250 Volt, 50 HZ / 60 HZ to support electric generator, single phase AC power supply.


All electrical wiring shall be concealed. Suitable copper cables shall be used for lighting circuits. The copper cables used will be of 3/19 cable for lighting circuits. ISI mark and concealed in PVC conduits insulated copper wire shall be used for wiring to be done in PVC conduit with small size distribution board with MCB, protection and to separate with main supply.


Ghosh Group Standard Porta cabin size for the site construction office in Dubai, UAE, Abu Dhabi, Qatar, Oman, KSA is 3 meter width x 6 meter length / 3 meter Width x 9 meter Length / 3 meter Width x 12 meter Width (1 Room, 2 Room, Bathroom).

View Complete Details

Sandwich Panel

Ghosh Metal Industries LLC, based in Ajman, Dubai, United Arab Emirates has a sandwich panel factory which is used mainly for Roof and Wall.


Sandwich Panel dimension:

Top Skin:
GMI 35/200 mm and GMI 45/250 mm


Bottom Skin:
Low Rib Profile of Galvanized Mill Finish,
Galvanized Pre Painted
AluZinc
Color coated steel sheet
Mill finish aluminium
Color coated Aluminium Profile
GI Polyester Coated
Aluminium Polyester Coated
GI PVDF Coated
Aluminium PVDF Coated
Alu Zinc PVDF and Polyester Coated Alloy Steel
Aluminium Foil as bottom


Profile used:
Galvanized Mill Finish
Galvanized Pre Painted
AluZinc
Color coated Steel Sheet
Mill Finish Aluminium
Color coated Aluminium Profile
GI Polyester Coated
Aluminium Polyester Coated
GI PVDF Coated
Aluminium PVDF Coated
Alu Zinc PVDF
Polyester Coated Alloy Steel


Thickness:
0.40 mm to 0.90 mm of the Top and Bottom Sheet
Effective Width of the Sandwich panel 1050 mm with Covering Width of the sandwich panel 1000 mm The length of sandwich panel might go up to 12 mt
Customer can also order customized sandwich panel roof / wall with their detail and price these panel will be manufactured and supplied all over Dubai, Abu Dhabi, UAE, Oman, Saudi, Qatar and Africa too.


Grade:
Aluminium Alloy 3105, 3003, 1100, 1050
Mill Finish and Aluminium Prepainted color coated
Temper H16
Galvanized Steel Coil As per ASTM A653
Lock forming quality with Zinc coating from 180 to 275 GSM, or G60 to G90
Top Paint: 5 Micron Primer + 20 Micron paint (5+20 Micron)
Bottom Coat: 5 Micron Primer + 7 Micron Paint (5+7 Micron).


Alu Zinc ASTM A792 with Zinc Coating Z80 to Z220
Top Paint: 5 Micron Primer + 20 Micron paint (5+20 Micron)
Bottom Coat: 5 Micron Primer + 7 Micron Paint (5+7 Micron)


Sandwich Panel Roof/Wall RAL Colour

RAL 9002 Off White
RAL 1001 Beige
RAL 5012 Light Blue
RAL 5010 Dark Blue
RAL 5002 EMMAR Blue,
RAL 7046 Dark Grey
RAL 7036 Grey
RAL 7037 Grey
RAL 1014 Light Beige
RAL 1015 Ivory
RAL 9003 White
RAL 9010 Pure White
RAL 3002 RED
RAL 3020 RED
RAL 2004 Orange
RAL 7015 Grey
RAL 6038 Green
RAL 6029 Light Green and more



Sandwich Panel Detail

We use both side low rib sheet of galvanized and aluminium mill finish and pre painted subject to our customer choice and the standard sandwich panel wall thickness comprises of 50 mm to 100 mm again customized according to our customer requirements choice.


Sandwich panel are mainly installed on the base of galvanized cold formed Z and C Purlin and are fixed on the Z and C Purlin with self tapping screw and self drilling screw.


These panels which we manufacture and supply are used in construction of roof panels.


Gosh group has manufactured and supplied sandwich panels which are used as roof for shopping mall, schools, labour camps. Our panels are also used in Portacabin, PreFab houses and to make cold rooms. These sandwich panels mainly protect the buildings, rooms etc from the heat, cold and rains.

View Complete Details

Corrugated Roofing Sheet


Ghosh Metal Industries Metal roofing profileis also named steel roof sheet, raw material is pre-painted hot dipped galvanized steel sheet, used as popular structuralmetal roofing materials and pre-painted aluminium coil sheet.
Thickness: 0.30 mm to 0.90 mm
Standard Width after corrugation: 1000 mm
Length: Subject to customer choice


With RAL Color of any as customer choice like RAL 9002 Off White, RAL 1001 Beige, RAL 5012 Light Blue, RAL 5010 Dark Blue, RAL 5002 EMMAR Blue, RAL 7046 Dark Grey, RAL 7036 Grey, RAL 7037 Grey, RAL 1014 light beige, RAL 1015 Ivory, RAL 9003 White, RAL 9010 Pure White, RAL 3002 RED, RAL 3020 RED, RAL 2004 Orange, RAL 7015 Grey, RAL 6038 Green, RAL 6029 Light Green, and more.


Ghosh Metal offerings high grade trapezoidal cladding sheets, which are widely installed for their attractive designs and robustness in buildings.


These are built using high grade metals, such as stainless steel, copper, aluminum, zinc, bronze and titanium. The sheets come with accurate dimensions and are easy to install


Profile design we have following cover width:
35/200 mm
45/250 mm x 1000 mm
45/150 mm x 900 mm


The Advantage of Metal and Aluminium Roof Sheet:
(1) Easy installation
(2) High strength
(3) Low in costs
(4) Durable
(5) Nice appearance


Below is the required accessorises for the roof profile and sandwich panel sheet for shed and ware-house, industrial roof as top ridge, bottom ridge, rain gutter, vally gutter, and flashing corner.


GHOSH METAL has new corrugation line in UAE for S Type / waves type corrugation (Galvanized Corrugated) sheet with 16 to 20 mm. Waves and pitch waves distance 75 to 76 mm with cover width after corrugation 780 mm 900 mm 1000 mm x Length we can cut subject to our customer choice.
Thickness: 0.28 mm (Gauge32 to Gauge20) to 0.90 mm


Galvanized Steel of Ghosh Meal Dubai Ajman United Arab Emirates factory.

View Complete Details

Gi Roofing Sheet

Ghosh Metal Industries - Metal roofing profileis also named steel roof sheet, raw material isPre-painted Hot Dipped Galvanized Steel Sheet, used as popular structuralmetal roofing materials and Pre Painted Aluminium Coil Sheet, Thickness: 0.30 mm to 0.90 mm x With the Standard Width after Corrugation 1000 mm x Length Subject to Customer Choice, With RAL Color of any as Customer Choice like RAL 9002 Off White, RAL 1001 Beige, RAL 5012 Light Blue, RAL 5010 Dark Blue, RAL 5002 EMMAR Blue, RAL 7046 Dark Grey, RAL 7036 Grey, RAL 7037 Grey, RAL 1014 light beige, RAL 1015 Ivory, RAL 9003 White, RAL 9010 Pure White, RAL 3002 RED, RAL 3020 RED, RAL 2004 Orange, RAL 7015 Grey, RAL 6038 Green, RAL 6029 Light Green, and More.


Ghosh Metal offerings high grade Trapezoidal Cladding Sheets, which are widely installed for their attractive designs and robustness in buildings. These are built using high grade metals, such as stainless steel, copper, aluminum, zinc, bronze and titanium. The sheets come with accurate dimensions and are easy to install


Profile Design we have 35/200 mm with 1000 mm Cover Width, 45/250 mm x 1000 mm Cover Width, 45/150 mm x 900 mm Cover Width. The Advantage of Metal and Aluminium Roof Sheet.(1)Easy installation(2)High strength(3)Low in costs(4)Durable(5)Nice appearance


Below is the required Accocerrioes for the Roof Profile and Sandwich Panel Sheet for Shed and Ware house, Industrial Roof as Top Ridge, Bottom Ridge, Rain Gutter, Vally Gutter, and Flashing Corner


GHOSH METAL Have New Corrugation line in UAE for S Type / Waves Type Corrugation (Galvanized Corrugated) Sheet with 16 to 20 mm Waves and pitch waves distance 75 to 76 mm with cover width after Corrugation 780 mm 900 mm 1000 mm x Length we can cut subject to our Customer Choice. Thickness: 0.28 mm (Gauge32 to Gauge20) to 0.90 mm, Galvanized Steel of Ghosh Meal Dubai Ajman United Arab Emirates Factory.

View Complete Details

Corrugated Sheet

Ghosh Metal Industries Metal roofing profileis also named steel roof sheet, raw material is pre-painted hot dipped galvanized steel sheet, used as popular structuralmetal roofing materials and pre-painted aluminium coil sheet.
Thickness: 0.30 mm to 0.90 mm
Standard Width after corrugation: 1000 mm
Length: Subject to customer choice


With RAL Color of any as customer choice like RAL 9002 Off White, RAL 1001 Beige, RAL 5012 Light Blue, RAL 5010 Dark Blue, RAL 5002 EMMAR Blue, RAL 7046 Dark Grey, RAL 7036 Grey, RAL 7037 Grey, RAL 1014 light beige, RAL 1015 Ivory, RAL 9003 White, RAL 9010 Pure White, RAL 3002 RED, RAL 3020 RED, RAL 2004 Orange, RAL 7015 Grey, RAL 6038 Green, RAL 6029 Light Green, and more.


Ghosh Metal offerings high grade trapezoidal cladding sheets, which are widely installed for their attractive designs and robustness in buildings.


These are built using high grade metals, such as stainless steel, copper, aluminum, zinc, bronze and titanium. The sheets come with accurate dimensions and are easy to install


Profile design we have following cover width:
35/200 mm
45/250 mm x 1000 mm
45/150 mm x 900 mm


The Advantage of Metal and Aluminium Roof Sheet:
(1) Easy installation
(2) High strength
(3) Low in costs
(4) Durable
(5) Nice appearance


Below is the required accessorises for the roof profile and sandwich panel sheet for shed and ware-house, industrial roof as top ridge, bottom ridge, rain gutter, vally gutter, and flashing corner.


GHOSH METAL has new corrugation line in UAE for S Type / waves type corrugation (Galvanized Corrugated) sheet with 16 to 20 mm. Waves and pitch waves distance 75 to 76 mm with cover width after corrugation 780 mm 900 mm 1000 mm x Length we can cut subject to our customer choice.
Thickness: 0.28 mm (Gauge32 to Gauge20) to 0.90 mm

View Complete Details

Z Purlin Galvanized

In steel construction, the term Purlin typically refers to roof framing members that span parallel to the building eave, and support the roof decking or sheeting. The purlins are in turn supported by rafters or walls. Purlins are most commonly used in Metal Building Systems, where Z-shapes are utilized in a manner that allows flexural continuity between spans.


It is the practice in the steel industry that structural shapes are assigned representative designations for convenient shorthand description on drawings and documentation: Channel sections, with or without flange stiffeners, are usually referenced as C shapes; Channel sections without flange stiffeners are also referenced as U shapes; Point symmetric sections that are shaped similar to the letter Z are referenced as Z shapes. Section designations can be regional and even specific to a manufacturer. In steel building construction, secondary members such as purlins (roof) and grits (wall) are frequently C, Z or U sections, (or mill rolled) C sections.


Cold formed members can be efficient on a weight basis relative to mill rolled sections for secondary member applications. Additionally, Z sections can be nested for transportation bundling and, on the building, lapped at the supports to develop a structurally efficient continuous beam across multiple supports.


Z & C Purlin Specification: ASTM A653, Galvanized Steel Coil Grade 50, SS340, Minimum YS 400 MPA, TS 450 MPA, Regular/Zero Spangle, Origin Korea, India, Saudi Arabia. Thickness: 1.5 mm to 3.5 mm



View Complete Details

PPGI Sheet Coil

PPGI is pre-painted galvanised steel, also known as percolated steel, coil coated steel, colour coated steel etc. A galvanised steel sheet in coil form is cleaned, pre-treated, applied with various layers of organic coatings which can be paints, vinyl dispersions, or laminates. These coatings are applied in a continuous process known as Coil Coating. The steel thus produced in this process is a pre-painted, prefinished ready to use material. PPGI is the material which uses galvanised steel as the basic substrate metal. There could be other substrates such as aluminium, Galvalume, stainless steel, etc. Over 10 million tons of such coated steel is produced today in over 300 coating lines in the Globe.
We Ghosh Group specialize in offering a range of high quality PPGI Sheets, available in different sizes and standards to meet clients requirement. These sheets are available in various standards and thus find application like swimming pools, parking area of multi stored building and shopping complex, gardens, terrace, open to sky areas etc. These sheets are designed in various attractive shades to enhance the exterior of homes, offices, and various other buildings. Further, these PPGI Sheets can also be custom designed as per the exact details provided by Customers. PPGI sheets provided by our company are extensively used in construction industry. Our sheets have excellent corrosion resistance thus preferred in a number construction application; broadly these are used in roofing and walling. These sheets are chosen for delivering quality performance that goes on for several years.


Thickness: 0.30 mm to 1.50 mm x Width: 50 mm to 1219 mm x Coil ID: 508 mm, Top Paint: 5+20 Micron, Bottom Paint 5+7 Micron, Coil Weight: 3.5 to 4.5 MT, Zinc Coating 40 GSM to 120 GSM, Ghosh Metal Industries and Globe Metal and Power FZE Offer a wide range of Color for its Construction site fencing in Abu Dhabi, Dubai, Ajman, Sharjah, Ras Al Khaima, Fujirah, Al ain in UAE subject to its Customers Choice like RAL 9002 Off White, RAL 1001 Beige, RAL 5012 Light Blue, RAL 5010 Dark Blue, RAL 5002 EMMAR Blue, RAL 7046 Dark Grey, RAL 7036 Grey, RAL 7037 Grey, RAL 1014 light beige, RAL 1015 Ivory, RAL 9003 White, RAL 9010 Pure White, RAL 3002 RED, RAL 3020 RED, RAL 2004 Orange, RAL 7015 Grey, RAL 6038 Green, RAL 6029 Light Green, and More.


Grade: ASTM A653, Lock Forming Quality, Origin: India and China. Ghosh Group of Companies is the Leading Stockist and Importer of the Pre Painted Galvanized Steel Coils (PPGI) in the UAE and GCC Market also we cover the market of Durban, Cape Town, Port Elizabeth, Mombasa, Dar Es Salaam, Maputo port, Louis Abidjan Lagos. Ghosh Group engages to supply of its Pre Painted Galvanized Steel Coil to Most of the Profile, Sandwich panel factory in UAE and GCC including some African Companies. Ghosh Metal having huge customer base of Rolling Shutter manufacturer in Oman, UAE, KSA for their requirement of Pre Painted Galvanized Slitting Steel Coil and galvanized steel Slit Coil.

View Complete Details

GI Boundary Fence

Ghosh Metal Industries LLC based in Ajman United Arab Emirates Having Excellent Fabrication Facility of Temporary Construction site Hording Panel Fencing where Ghosh Metal got in house production support and import of the required materials of Fencing Panel like Profile Corrugated Sheet, Galvanized C Chanel , Galvanized Steel Pipe, HDG Clamp with Nut and Bolt.


Our Direct and Indirect Regular Client like EMAAR PROPERTIES COLOR RAL 5002/5005


Our Direct and Indirect Regular Client like GHANTOOT TPT AD COLOR RAL 9002/2004


Our Direct and Indirect Regular Client like ADNOC UNITED ARAB COLOR RAL 5015



The Dis Continuous Temporary Boundary Hording Fencing Panel Can be Fabricate Subject our Customer of Ghosh Metal Industries LLC, and The Standard Approved Construction site fence available in our Factory 2 meter x 2 meter and the Mount height of the fencing panel for construction boundary site parameter hording 2.2 meter / 2.4 meter / 2.8 meter 3.0 meter. Corrugated Profile sheet thickness 0.40 mm to 0.70 mm Galvanized and Aluminium, Galvanized C Chanel 40 mm x 40 mm x 40 mm x 1.2 mm to 2.0 mm thickness and both end Pipe 42.00 mm OD with minimum thickness of 1.2 mm to 2.0 mm, Back Support 1.6 meter to 2.0 meter Length with Concret Block of Heavy Weight 600 mm X 400 mm X 200 mm Subject to Customer requirement, site condition, wind pressure.



Ghosh Metal Industries Offer a wide range of Color for its Construction site fencing in Abu Dhabi, Dubai, Ajman, Sharjah, Ras Al Khaima, Fujirah, Al ain in UAE subject to its Customers Choice like RAL 9002 Off White, RAL 1001 Beige, RAL 5012 Light Blue, RAL 5010 Dark Blue, RAL 5002 EMMAR Blue, RAL 7046 Dark Grey, RAL 7036 Grey, RAL 7037 Grey, RAL 1014 light beige, RAL 1015 Ivory, RAL 9003 White, RAL 9010 Pure White, RAL 3002 RED, RAL 3020 RED, RAL 2004 Orange, RAL 7015 Grey, RAL 6038 Green, RAL 6029 Light Green, and More.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Parimal Ghosh (Ghosh Metal Industries Llc)
  • Ajman Jurf Industrial Area 3, United Arab Emirates
  • Share us via