Global Hardware and Tools Llc

Abu Dhabi, United Arab Emirates

The TM-8812 is a handheld microprocessor-controlled ultrasonic thickness gauge specifically designed to measure the thickness of metallic and non-metallic materials e.g. aluminium, titanium, plastics, ceramics, glass, plastics including rubber and other good ultrasonic wave conductors, as long as they have parallel top and bottom surfaces. This gauge can be used to determine the exact thickness of pipework to ensure the correct settings on an ultrasonic flow meter. The TM-8812 will check a pipe for loss of thickness due to corrosion or erosion.

Without the Finger Saver you are exposing yourself to potential hand or finger injuries. Your hands are your most important day to day tool. If you damage your hands, or particularly and more importantly, your fingers, you will be affected in everything you do.From getting dressed to washing your face; you will have a constant reminder of an injury that could have been avoided. Don't put your hands where they can be injured, stay safe. When using the FingerSaver you are able to keep your hands away from any potential danger of impact. The FingerSaver is designed to be held by you, or it can be held in position by a work colleague to further reduce the risk of injury. The FingerSaver tool allows you to mitigate any risk involved in the task at hand and it gives you the confidence to perform the work activity safely, without injury to your hands.

Easy-to-use light meter with USB interface, wide measuring range up to 400, 000 Lux, large LCD display, 40-segment analogue bargraph, relative mode and user-selectable measuring units. Ideal for environmental monitoring, health and safety checks, and industrial applications.

• Measures both Lux and Footcandles (FC), user selectable
• Range selection of 4 Lux ranges and 4 FC ranges
• Impact-resistant ABS case with protective rubber boot
• Silicon photo diode sensor and spectral response filter
• Fully cosine corrected
• Sensor connected to the instrument by a fixed approx 1.5 metre (approx) coiled cable
• Measuring rate of 1.5 times per second
• 43mm LCD display with backlight, 40 segment bar graph and function indicators
• Data hold freezes measured values
• Min/max memory
• Peak min hold, peak max hold
• Relative reading from user set value
• Over range indication
• Reset function
• Auto power off after 20 minutes
• USB interface for real time data output to PC or laptop
• Impact-resistant ABS case with protective rubber boot
• Supplied with carry pouch, rubber boot, Software, USB interface cable, protective lens cap & battery

Application :
This very handy smart tool used very widely in production, at the lab, or with the customer related to the following industries :

-Floormaintenance
-Surfacecleaningqualitycontrol
-Stoneandtileglossmeasurement
-Qualitycontrolofpaintandink
-Polishedmetalsurface, measurement(chromeplating)
-Inspectionofpaintprotectionandwaxing
-Auto-bodypaintinspection
-Surfaceinspectionofplasticmoldings
-Evaluationofdetergentsandwashers
-Checkingmasonryandwashers
-Checkingbuildingexteriors
-Furniture Manufacture
-Yacht Manufacture

Features:
Light weight and portable
The 60 angle is universal for all applications
Measuring results on a wide and clear back-lit display.
Auto Power off Function
with high accuracy (1 gloss points)
Low power consumption: works40 hours and measures approximately 10000 data continuously
Highly damp proof , assures the instrument works under any terrible condition.
Low drift white light source of lumen : 6.0-7.01m to guarantee long term stability
The rock solid base and the extremely stable mounted optical components assures measurements to be accurate under all circumstances and conditions.
Covered by 2 years warranty

Features :

Indoor-outdoor Dual temperature sensor.
Max-Min Memory.
Recording the higher or lower temperature value every day.
The instrument has one string to deduct location behind one's back and prop up the board, can hang on the wall or put on the desk.

Specification :

Humidity measuring range :10% RH - 99% RH
Humidity measurement accuracy : 5% RH
Humidity resolution : 1%

Outdoor :-50C - 70C(-58F 158F), Indoor :-10C - 50C(14F 122F)
Accuracy : 1C , Analyze degree : 0.1C
Characteristic : 3 line of LCD display
Max outdoor temperature sensing distance : 1.5M
Change the battery : 1.5V AAA

Temperature survey method :
Press MAX/MIN key, measure the highest or lowest temperature value indoor and outdoor at present.
The indoor and outdoortemperature of environmental is written down, press RESET key to remove the value ofpresent.
PressC/F key to change the display C or F.