Ajman, United Arab Emirates
Write a Review
Our Products
Steel Sheets
2 Products availableMetal Angle
2 Products availableRoofing And False Ceiling
2 Products availableGi Sheets
1 Products availableCladding Materials And Building Panels
1 Products availableMetal Roofing Sheets
1 Products availableBuilding Hardware
1 Products availableOur Complete range of products are MS I and H Beam, COLD FORMED STRUCTURAL Z PURLIN and Galvanized Cold Formed STRUCTURAL Z Purlin.
We supply Mild Steel I and H Beam to our customer in Dubai, UAE and who all are into construction and fabrication. Our Stock of I and H Beam in S275JR and readily available for supply to GCC and Africa market.
In steel construction, the term Purlin typically refers to roof framing members that span parallel to the building eave, and support the roof decking or sheeting. The purlins are in turn supported by rafters or walls. Purlins are most commonly used in Metal Building Systems, where Z-shapes are utilized in a manner that allows flexural continuity between spans.
It is the practice in the steel industry that structural shapes are assigned representative designations for convenient shorthand description on drawings and documentation: Channel sections, with or without flange stiffeners, are usually referenced as C shapes; Channel sections without flange stiffeners are also referenced as U shapes; Point symmetric sections that are shaped similar to the letter Z are referenced as Z shapes. Section designations can be regional and even specific to a manufacturer. In steel building construction, secondary members such as purlins (roof) and grits (wall) are frequently C, Z or U sections, (or mill rolled) C sections.
Cold formed members can be efficient on a weight basis relative to mill rolled sections for secondary member applications. Additionally, Z sections can be nested for transportation bundling and, on the building, lapped at the supports to develop a structurally efficient continuous beam across multiple supports.
Z & C Purlin Specification: ASTM A653, Galvanized Steel Coil Grade 50, SS340, Minimum YS 400 MPA, TS 450 MPA, Regular/Zero Spangle, Origin Korea, India, Saudi Arabia. Thickness: 1.5 mm to 3.5 mm
|
Web |
Flange |
Flange |
Lip |
Thickness |
|
102 |
40 |
45 |
15 |
1.5 to 3.5mm |
|
142 |
40 |
45 |
15 |
1.5 to 3.5mm |
|
152 |
40 |
45 |
15 |
1.5 to 3.5mm |
|
172 |
50 |
55 |
20 |
1.5 to 3.5mm |
|
202 |
50/60 |
55/65 |
20 |
1.5 to 3.5mm |
|
232 |
50/60 |
55/65 |
20 |
1.5 to 3.5mm |
|
252 |
60 |
65 |
20 |
1.5 to 3.5mm |
|
302 |
70/80 |
75/85 |
20 |
1.5 to 3.5mm |
|
352 |
75/85 |
85/90 |
20 |
1.5 to 3.5mm |
Parimal Ghosh (Globe Metal and Power Fze)Ajman, Jurf Industrial Area, Opp. Hamriyah Free zone Phase 2, Ajman, United Arab Emirates, United Arab Emirates
Share us via
