Dubai, United Arab Emirates
Write a Review
Our Products
Outdoor Heater
1 Products availableCooling Tower, Heat Exchanger & Parts
1 Products availableLeading Manufacturer, Supplier & Retailer of Wall/Pole mounted hazardous location fans, Dust Suppression and Rated Fans for oil/gas.
The outdoor heater KALIENTE include in a single product a modern aesthetic and innovative design, together with the opportunity to personalize the product. The flame that burns inside a special glass tube will create a special atmosphere and will make your local really charming. The heater can work in a manual or automatic mode, with a remote control that can switch the heater on/off and can regulate it in 3 levels of power. You can choose among GPL bottle or fix net of natural gas, with considerable savings on the cost of management. The appearance of the heater can be customized, choosing the colours or with silkscreened prints, images, photos which will make your KALIENTE unique.
Heating capacity
Hs 10, 2/6, 0 Kw max/min Consumption
0, 7/0, 4 Kg/h
Irradiated surface
20/25 m2
JPL-24CFO-HL
For spot cooling in atmospheres containing flammable or explosive vapors, gases, or dusts. Motor is UL listed for Class 1, division 1, Groups C & C, and Class 2, Division 1, Groups E, F, & G for flammable vapors combustible dust environments. Meets OSHA safety regulations while delivering maximum air flow in wide range of hazardous location applications
Product DescriptionFEATURES:
| 1 SPEED / 1 PHASE | ||
| TYPE=Circulator | CFM =7980 | PHASE= 1 |
| DRIVE=Direct Drive | AMPS =9.8 / 4.9 | RPM =1725 |
| SPEED(s) =1 | VOLTAGE =115/208-230 | WARRANTY= 2 YEAR |
| HP =1/2 | BLADE DIA. (in) =24 | WEIGHT (lbs)= 50 |
| NO. OF BLADES =3 | MOTOR= TEFC | |
Establishing a safe, healthy, and effective work environment involves the management of dust. Dust suppression focuses on areas that dust collection isnt able to effectively deal with. This can include dust that accumulates in hard-to-access areas such as flour mills, camel race tracks, chemical plants and warehousing with high traffic volume. For oil & Gas or other hazardous locations, dust can become a potential explosion hazard if not suppressed correctly. HydroCool has an effective dust suppression system that can be customized to suit your specific application.
The Hydro 8 is the most sought after cooling machine for Dubais summer climate due to its streamline looks, powerful 8000m3 of airflow, quiet operation and alarge water tank that will last up to 4 hours depending on speed selected. Its side cellulose vents contribute to the intake for maximum cooling effect. Side water fill whereby one can add ice to the water for extra cooling effect. 3 speeds, swing function and an ionizer that ensures fresh clean cool air.
Airflow: 8000m/h Power: 380 w Power supply: 220V , 50Hz Current: 1.8A Cooling Area: 30-40 m Dry weight: 35kg Dimensions (LxWxH): 800*480*1380 mm
Axial channel and wall-mounted fans of the EAC series are manufactured in compliance with the international standard ISO 9001 and comply with the quality assurance requirements concerning the products that are to be used in potentially explosive atmospheres.
Product DescriptionAxial channel and wall-mounted fans of the EAC series are manufactured in compliance with international standard ISO 9001 and adhere to the quality assurance requirements concerning products that are to be used in potentially explosive environments, as specified in the standard PN-EN 13980.
Equipment meets requirements of the ATEX 94/9/EC Directive and is designed for use in potentially explosive environments, other than coal mines and dog headings.
The EAC fan meets requirements set for the group II, category 2G/3G zone 1 and/or 2. They may be installed within a duct or on a wall; available in versions with either short housing (type KO) or long housing (type DO). Temperature of the transported medium and the surrounding environment should be within the range of -20C to +40C.
ConstructionHousing of the EAC fans is made of welded steel sheet and covered with polyester powder paint (housing black, RAL 9005; rotor yellow, RAL 1016), as standard. To minimise the risk of sparking, some segments have been made of aluminum sheet. The rotor, provided with aluminum blades, is dynamically balanced according to ISO1940; accuracy class G2.5.
Electric motorThe EAC fans are provided with induction three-phase motors (230/400V or 400V, 50Hz) and are adapted for operation within potentially explosive environments. On request, we can supply motors with a different temperature rating and various housing protection e.g., types nA, d, de.
For motors provided with PTC posistor sensors that should be connected to the protection system, the type of sensor should be specified by the customer/electrician.
Hydrocool Advanced Outdoor Systems (Hydrocool Advanced Outdoor Systems)Hydrocool Advanced Outdoor Systems
Suite 1608,
HDS Business Centre,
Cluster M, JLT,
Dubai,
UAE
Share us via
