Other Products / Services #5764222

Switching amplifiers evaluate the sensor's signal and control the output. Variants with relay as well as active transistor and potential-free optocoupler outputs are available.

Encoders use the wear-free photoelectric detection. A pulse disc firmly attached to the shaft ensures this detection.
By means of high pulse counts linear distances can be precisely resolved to just a few millimetres.

Rotational speed sensors integrate rotational speed detection and monitoring in one unit. The sensor head operates to the principle of the inductive proximity sensor. The sensor detects metal actuating surfaces on a rotating machine. The integrated evaluation converts this information into rotational speed. If the set min/max rotational speed is higher or lower, the electronic output switches.

The complete product family includes analogue and digital pulse evaluation systems for speed, slip and direction monitoring, frequency-to-current converters, counters and digital displays as well as threshold relays and displays for analogue standard signals.

The pmd 3d camera detects scenes and objects in their spatial dimensions at a glance. In contrast to laser scanners it does not require moving components and is thus robust and wear-free. The operating principle is the same as for the 3D sensor. Besides the 3D distance image the camera provides a grey image of the scene. The combination of these images offers the possibility to freely program application-specific tasks by means of a software development kit.

Wherever motion of machine parts presents a danger to people or goods, safety light curtains or safety light grids are used. The protective equipment ensures that the outputs are switched off which results in a machine halt.

Multifunctional with the advantage on your side: The safety relays provide various connection options for safety light curtains, fail-safe inductive sensors or other non-contact guards. They meet the highest requirement with SIL 3 (IEC 61508). "Monitored" or "automatic start" as well as external muting are only some of numerous functions.

Controllers for safety-related applications to EN 13849, PL d and IEC 62061, SIL cl2 are called "safety controllers". Special test routines for hardware and software are implemented in the devices. The certification of the hardware, operating system software and programming tools makes it easier for the project engineer to get the approval for the machine.

In automation and process technology, monitoring and control of temperatures is one of the most important measuring tasks. The correct temperature often influences quality and efficiency of the process. To avoid dangerous states, the temperature must be monitored in many applications.
To do so, compact temperature switches and transmitters as well as cable and probe sensors are used that are connected to an external control monitor. In some industrial areas non-contact infrared (IR) measuring sensors are used.

Control monitors in DC and AC versions evaluate the signals of the flow sensors and provide them as a binary signal for further processing. They integrate wire break and temperature monitoring. Versions for hazardous areas are also available.

AS-i controller and gateways have AS-i master functionality and are thus an elementary part of AS-i networks. These components are usually in a control cabinet and ensure data communication. A wide product range provides suitability for different applications. An integrated CoDeSys-programmable PLC allows that the AS-i controllers can also be used as supplementary or independent control system.

RFID systems based on 125 kHz for production and conveying technology, identification of workpiece carriers and products.
- System DTS 125 with AS-Interface
- System DTE 100 with Profibus DP
- System DTE 101 with Profinet
- System DTE 102 with Ethernet/IP

efector octavis is a simple to implement vibration monitoring system which detects vibration data and automatically determines the machine diagnosis directly on the machine. The machine condition is forwarded to the PLC or to SCADA systems. It fulfils the main requirements for modern machine monitoring: compatibility, modularity, and transferable configuration.

efector metris is used to measure the consumption of compressed air. The high measurement dynamics in conjunction with high measurement accuracy and a fast response time result in an application range from leakage detection to operational measurement of consumption. Many possibilities of supplying the values measured for current and temperature allow almost universal coupling to process or control systems.

Efforts to reduce water consumption presuppose knowledge of the current consumption. Measuring systems such as magnetic-inductive or ultrasound flow meters can also be used for applications in drinking water circuits due to their compact design. The use in drinking water supply is ensured by the use of approved materials. Many possibilities of supplying the values measured for current and temperature allow almost universal coupling to process or control systems.

The platform of the ecomatmobilecontrol system: the powerful controller family.
Free programmability and the variety of configuration options enable use in a wide range of different applications.

Displays with graphics capabilities, free programming to IEC 61131 and various interfaces are features of the dialogue modules.
The convenient user interface for service and machine handling the dialogue modules of the ecomatmobilecontrol system

The solution provider for special applications. Signal converter to adapt sensor and actuator signals to the inputs and outputs of the controller or CANopen modules.

Sockets are mainly used for the connection of sensors. High-quality socket contacts and materials ensure reliable electrical connections.
In addition to a wide range of standard products ifm also offers versions without silicone and halogen, versions for hygienic areas, for applications in contact with coolants and lubricants, as well as for welding applications.

Plugs are mainly used for the connection to splitter boxes and modules. High-quality pin contacts and materials ensure reliable electrical connections.
In addition to a wide range of standard products ifm also offers versions without silicone and halogen, versions for hygienic areas, for applications in contact with coolants and lubricants, as well as for welding applications

Connection cables feature a plug and a socket. They are used for the connection of sensors to splitter boxes and modules. High-quality contacts and materials ensure reliable electrical connections.
In addition to a wide range of standard products ifm also offers versions without silicone and halogen, versions for hygienic areas, for applications in contact with coolants and lubricants, as well as for welding applications.

Splitter boxes enable the connection of several sensors and the transmission of the corresponding signals and supply voltages via a multi-wire cable. This considerably reduces installation and wiring complexity.
In addition to splitter boxes with potted cable, versions with central connector are also available.

Adapter sockets enable led-through plug-and-socket connections in housings or control cabinets.

Adapter plugs are mainly used for retrofitting of sensors with cable glands to plug-and-socket connections.
They are screwed into the housing instead of the existing cable gland and connected to the existing terminals.

Y connection cables are used for the distribution of signals and the connection of two units to a connector.

COMBICON connectors offer the advantages of service-friendly plug-and-socket connections in conjunction with tried-and-tested screw and clamp technologies.
Today, they are used for the connection of many ifm control monitors, power supplies and AS-i masters as a standard

ifm offers a complete component system of easy-to-use mounting sets that make the installation of sensors and reflectors easier for you.
The solutions consist of a clamp fastened by only one screw that keeps the sensors safely in position and guarantees free movement in all axes.
Whereas the sensor mounting elements used depend on the sensor type, the clamps can be mounted in three different ways: rod mounting, free-standing mounting and fitting onto aluminium extrusions which are common in industry.