Post Your Requirement Menu

Welcome User

Other Products / Services

We offer a complete product range of Valve Seats, Ladder Shoe, Rubber Balls, Rubber Sheets and Rubber Profiles

Valve Seats

Rubber valve seats are used in butterfly valves for sealing purpose. The material of the seal can be made from many different elastomers or polymers. The seat may be bonded to the body or it may be pressed or locked in.

View Complete Details

Ladder Shoe

Ladder Shoe is used on the ladder legs as anti-slip and anti-skid purpose. To provide stability while mounting the ladder and as a means of protecting the flooring from being directly exposed to the aluminium metal. Made from: Natural Rubber, SBR, Polyurethane, etc

View Complete Details

Rubber Balls

Rubber balls are used as check or ball valves as screen cleaning and screen de-blinding as air restriction, in flow control and flow meter applications in the pharmaceutical, food and chemical processing industries and in Dewatering industries. They are Corrosion-resistant, Soft, has good electrical insulation and self-lubricating properties, High degree of flexibility and elasticity.

View Complete Details

Rubber Sheets

Rubber sheets are cost effective, reliable, easy to install, and are used in wide variety of applications, both static and dynamic. Made from: Natural, SBR, Nitrile, Neoprene, EPDM, Viton, Silicon, Polyurethane.

View Complete Details

Rubber Profiles

The rubber stripes and profile are considered to be the most popular product in rubber extrusion production line. Profiles and stripes are available in a variety of shapes, sizes, rubber materials. We manufacture both solid and sponge types. Profiles are used as sealing components with anti friction qualities for the smooth operation of windows and doors. These rubber profiles are extensively used in a vast range of diverse applications. These rubber profiles mainly serve as sealing components between the glass and aluminium sections . Some examples of the profiles that we manufacture are shown in the pictures below. Being custom manufacturers, we design and develop rubber profiles to the specific requirements of our customers.

View Complete Details

wheel stoppers

  • Width 130
  • Thickness 100

They are designed not to cause any damage to vehicles. Rubber wheel stopper gives the driver a clear warning that their rear wheels are parked correctly. They are supplied with pre-drilled holes for concrete or asphalt installations. The wheel stoppers reduce the risk of accidental damage to columns, concrete pillars and lighting columns, etc. They are manufactured in Solid and Hollow types for a tough service life. The product absorbs impact and quickly recovers back to its original shape when the load is removed. They are cut to the exact size to suit your site requirements. The product can be delivered in an All Black with a Bright Yellow Strip rubber finish.

View Complete Details

Wall Guards

  • Width 120
  • Thicknes 30

A range of solid rubber wall guards designed to be easily and securely fixed to walls. The guards can wrap around steel or concrete bollards, absorbing impact to reduce damage to property. The guard is supplied in a large range of thicknesses and widths. The screw head is concealed in the recessed grooves, stopping any accidental damage to property or vehicles. This range of guards can be fixed horizontally or vertically along walls, round columns and ramp areas. The wall guards can be fitted to many surfaces i.e. bricks, plaster, steel or concrete. Designed to absorb impact damage in loading bays, service areas and car parks. The solid rubber wall guards are fixed at an equi distance of 500mm to reduce the risk of accidental damage to all vehicle types. We supply the 'E' guards cut to the exact length to suit your site requirements.

View Complete Details

SPEED BREAKERS

  • Width 400
  • Length 500
  • Height 50

BULWARK Speed Humps offer the best solutions for slowing down traffic safely. Installing our speed humps will reduce the risk of accidents on your site. They are designed to enforce safe site speed limits by slowing down all vehicles. They are manufactured in Black and Yellow colours with Green and Red reflectors to help drivers get sufficient warning and to ensure that the ramps are seen clearly Our Speed Humps have deep ribbed surfaces for extra grip which are supplied with suitable holes that can be easily fixed in asphalt, concrete or block surfaces.

View Complete Details

LAMINATED DOCK BUMPERS

  • sizes 152 X 405mm

Bulwark Dock Bumpers are easily installed, they are long lasting to protect dock equipment, building walls and truck cargo from potential damage. Bumper projection should be specified at not less than 4”. For recessed docks or special applications, additional projection may be required. Installation Details: All laminated dock bumpers are assembled with two 3”x 3”x 14” thick steel angles. The angles are fastened with threaded rod and nut. All exposed metal parts are factory painted. We recommend all bumpers to be installed 1” to 2” below dock level. Use 34” or 58” expansion bolts with a minimum length of 3”.

View Complete Details

CONICAL BUFFERS

  • Size 15mm ,12mm

Male Conical Buffers are ideal for absorbing shock & impact. These buffers give high levels of deformation under impact load, and provide a progressive stiffness rate to absorb energy and protect equipment. These can be produced in stainless steel metals and various polymer types. Also available with Female Fixings.

View Complete Details

Machine Mounts

  • Size 20mm , 64mm

Machine mounts are ideal for use, as shock mounts or high isolation in static applications such as small pumps, engines and light electronic equipment. Features: • Achieves high isolation values (both active and passive) of low frequency vibration. • Attenuates shock loads due to its deflection capacity ideal for mounting sensitive electronics and lights in transit. • Available in stainless steel for food & mining industry applications. ​Applications: • Fans • Pumps • Stationary generator sets • Vibrating screens • Bulk bin load and discharge units • Computers, security cameras • Packaging and transit case mountings Materials: Natural Rubber ​

View Complete Details

Rubber Pads

  • Size 3\8” x 18” x 18”

They have an alternate high low ribbed construction and are easy to cut pads. These pads can be cut to be slightly larger than the size of the leg or machine, using shears or knife. They are easy to install. The multiple layers of ribbed mounting pad can also be used to increase deflection. Metal Sandwich pads are constructed of a steel plate bonded between ribbed anti vibration pads. These pads are Designed for a very high load capacity. Cork Sandwich Pads are laminated pads having 12” thick close grained cork that is securely bonded between two layers of 14” in an alternate low high ribbed neoprene rubber pads. These pads offers highest level of sound attenuation and vibration isolation. It does not need bolting and is easy to install.

View Complete Details

ANDWICH MOUNTS

  • Size 36 mm, 90 mm

​Sandwich Mounts can be loaded in compression, shear or a combination of both by fitting at an angle. Applications: • Engine mountings • Generator sets • Heavy plant & machinery. Material: Natural Rubber

View Complete Details

LEVELING FOOT MOUNTS

  • Size 22 mm, 40 mm

Machinery Leveling Foot Mounts are suitable for isolating vibration from heavy machinery and also acts as a leveling device for un-even flooring. ​Applications: • Machine Tools • Lathes • Presses • Heavy Industrial Equipment, • Conveyors • Food Processing & Pharmaceutical • equipment • Generator Sets. ​Material: Natural Rubber

View Complete Details

DOUBLE SHEAR BUSHINGS

  • Size 12 mm, 20 mm

​The two piece Mountings are an ideal product for both mobile & static applications for reducing vibration, allowing flexibility within a system and are used for reducing stresses on brackets etc. Using washers ensures a fail-safe mounting system arrangement. ​Applications: • Construction Equipment, • Power Generation • Military Vehicles • Off Road & Agricultural • Industrial Machinery & • Equipment. ​Material: Natural Rubber

View Complete Details

PTFE Bonded

PTFE coatings on the “U” bolts normally come as an inner lining on the rubber sleeve. This is done where low coefficient of friction and anti-stick properties is required on the pipe installation. ​Polytetrafluoroethylene (PTFE), is a thermoplastic member of the fluoropolymer family of plastics. PTFE has a low coefficient of friction, excellent insulating properties, and is chemically inert to most substances. It also can withstand high heat applications and it is well know for its anti-stick properties.

View Complete Details

Corner Guards

  • Size 55 x 55mm

Corner guards are designed to give drivers the maximum visibility using Black and Yellow strips, the correct hazard warning colours. The solid rubber guards’ wrap-around design, protects your property corners, columns and entrances that are exposed to vehicle and warehouse traffic. The corner guards can be securely fitted to concrete, brick, plain or plastered. Installation Details: With metal backup sheet: Fix the metal backup plate on the wall by drilling 6 holes in a 'Z' format.(Diagonally opposite) Fasten with GI screw and rawl plug M6 x 40 mm. Slide the rubber profile over the fixed metal sheet to complete the fixing process. Installation Details: Without metal backup sheet: Fix using a combination of epoxy adhesive and mechanical fasteners (GI flat screw) Size between 4-6 mm as per desired lengths.

View Complete Details

Polyurethane Coatings

The polyurethane coated U-bolt are a seamless, vulcanized material that can be applied to all types of U-bolts. These U-bolt’s are excellent for eliminating corrosion problems on piping in refineries, chemical plants, paper mills, rigs and the shipping industry. They serve as an excellent shock and vibration absorber. Polyurethane has good tensile strength and weather resistance , excellent abrasion, tear and hydrolysis resistance and a fair degree of chemicals resistance. They have better thermal stability than most general purpose rubbers and plastics

View Complete Details

Cylindrical Mounts

  • Size VC 20 X 25

Exhaust Systems, Small Fans, Instrument Panels. Compressors, Motors, Electronic Control Panels. Materials: Natural Rubber Styrene Butadienne Rubber (SBR) Neoprene Nitrile Silicon

View Complete Details

WAISTED O MOUNTS

  • Size 10 mm

Waisted ‘O’ Mounts offer low shear stiffness properties and are available with various thread configurations. Applications: • Light weight equipment • Vibratory feeder • Electric motors • Control panels Material: Natural Rubber Chloroprene Rubber

View Complete Details

O-Rings

O ring compounds are designed depending upon the application i.e. Temperature, Pressure and Medium. Hardness of the O-ring can be varied depending on whether the application is Static or Dynamic. Made from: NBR, Silicon, AFLAS FKM, FVMR, HNBR, and also grades of FKM like A type, Terpolymer of FKM, AED resistant of FKM, and low temperature grades.

View Complete Details

metal bonded components

​The metal imports sufficient stiffness to the rubber so that the part can be mounted. The rubber equips the metal with elasticity and damping properties. Rubbers to metal products are used for ant vibration, shock absorption, etc. They are used in machines, automobiles, earth moving equipment, etc. Made from: Natural Rubber, CR, EDPM, FKM etc.

View Complete Details

Gaskets

Rubber washer gasket is a ring used in mechanical devices to prevent vibration from spreading one part to another, reducing noise levels. It is used to prevent leakage and is easily replaceable. Made from: NBR, FKM. EPDM

View Complete Details

Custom Molded Components

Custom molded components like Grommets, Caps, Bushes etc., are made from captive production tooling based on customer drawings and specification. Custom molded components are made in a wide range of elastomers with controlled parameters to provide superior strength, durability, chemical resistance, resilience, abrasion resistance etc. Made from: Natural Rubber, CR, EDPM, FKM, Silicon rubber etc.

View Complete Details

Rubber Rollers

Rubber rollers are used for variety of purposes and are found in many manufacturing processes. The basic uses for rubber rollers are found in the manufacturing processes of textiles, film, sheet, paper, wood, coiled metal etc. Polymers used in roller coverings: Silicone Rubber Neoprene Buna Nitrile Natural Rubber Ethylene Propylene Diene Monomer (EPM, EPDM) ​Properties of industrial rubber rollers: Excellent rubber to metal bond Thermal conductivity Various rubber formulations Flat, stepped and contoured Heat resistance Rubber Rollers have different hardness (durometers) depending on applications. Rubber is chosen to make rollers because it does not adhere to adhesive. Resistance to compression stress. The choice of covering material is determined by the roller's environment and function.

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Raziya
  • Industrial Area 15 Sharjah, United Arab Emirates