Our Products
Industrial Mountings
2 Products availableCompression Molded Rubber
2 Products availableIndustrial & Oil Seals
2 Products availableRubber & Rubber Products
1 Products availablePrinting Machines & Equipment
1 Products availableRubber Pad
1 Products availableBushings
1 Products availableTesting Equipments
1 Products availableHardware Fittings And Accessories
1 Products availableWe offer the best product range of Quad Seals, Rubber Stripes and Profile and CONICAL BUFFERS.
O ring compounds are designed depending upon the application i.e. Temperature, Pressure and Medium. Hardness of the O-ring can be varied depending on whether the application is Static or Dynamic.
Made from: NBR, Silicon, AFLAS FKM, FVMR, HNBR, and also grades of FKM like A type, Terpolymer of FKM, AED resistant of FKM, and low temperature grades.
Four lipped seals with a specially developed sealing profile that actually provides twice the number of sealing surface than an O ring. Quad Seals provide lower friction than an O ring and resists spiral twisting.
Made from: NBR, and FKM & FVMQ.
Rubber Backup rings prevent migration of O rings into the sealing gap when subjected to high pressures.
Made from: NBR, HNBR, FKM etc.
The metal imports sufficient stiffness to the rubber so that the part can be mounted. The rubber equips the metal with elasticity and damping properties. Rubbers to metal products are used for ant vibration, shock absorption, etc. They are used in machines, automobiles, earth moving equipment, etc.
Made from: Natural Rubber, CR, EDPM, FKM etc.
Rubber bellows are mainly used to provide a dust free atmosphere for shafts.
Made from: Natural, CR, NBR, etc.
Rubber washer/ gasket is a ring used in mechanical devices to prevent vibration from spreading one part to another, reducing noise levels. It is used to prevent leakage and is easily replaceable.
Made from: NBR, FKM. EPDM
Custom molded components like Grommets, Caps, Bushes etc., are made from captive production tooling based on customer drawings and specification. Custom molded components are made in a wide range of elastomers with controlled parameters to provide superior strength, durability, chemical resistance, resilience, abrasion resistance etc.
Made from: Natural Rubber, CR, EDPM, FKM, Silicon rubber etc.
Polymers used in roller coverings:
| Properties of industrial rubber rollers:
| Applications:
|
Rubber valve seats are used in butterfly valves for sealing purpose. The material of the seal can be made from many different elastomers or polymers. The seat may be bonded to the body or it may be pressed or locked in.
Types:Both the types of rubber- natural rubber and synthetic rubber- are used for making different varieties of rubber linings. The type of rubber depends upon the purpose and application of rubber lining.
| Applications:Main applications of rubber linings are Storage Tanks, Conveyor Rollers, Butterfly Valves, delivery piping, Containers and for any kind of surface treatment and protection against environment, chemical erosions, atmospheric degradation. |
Rubber sheets are cost effective, reliable, easy to install, and are used in wide variety of applications, both static and dynamic.
Made from:Natural, SBR, Nitrile, Neoprene, EPDM, Viton, Silicon, Polyurethane.
The rubber stripes and profile are considered to be the most popular product in rubber extrusion production line. Profiles and stripes are available in a variety of shapes, sizes, rubber materials. We manufacture both solid and sponge types.
Profiles are used as sealing components with anti friction qualities for the smooth operation of windows and doors. These rubber profiles are extensively used in a vast range of diverse applications. These rubber profiles mainly serve as sealing components between the glass and aluminium sections .
Some examples of the profiles that we manufacture are shown in the pictures below. Being custom manufacturers, we design and develop rubber profiles to the specific requirements of our customers.
Round rubber cords are a good alternative in areas where the sealing is not too aggressive or under very high pressure. These cords can be installed very easily in inaccessible work areas and can be joint on site with adequate adhesive. They provide sufficient resistance and elasticity in the sealing applications.
NBR Nitrile Rubber CordEPDM Rubber Extruded Cord
EPDM Sponge Rubber Cord (Closed Cell)Viton FKM Rubber Cords
Silicone Rubber Cord
Ladder Shoe is used on the ladder legs as anti-slip and anti-skid purpose. To provide stability while mounting the ladder and as a means of protecting the flooring from being directly exposed to the aluminium metal.
Made from:Natural Rubber, SBR, Polyurethane, etc
Features:
They are simple and low cost fail-safe mounts.They are are made of natural rubber compound standard but can also be supplied in CR, NBR or EPDM.
Applications:
Vehicle cabs
Engines
Compressors
Pumps
Air conditioning units
Engine exhaust mounts (in high temperature rubber compound)
Material:
Natural Rubber
The two piece Mountings are an idealproduct for both mobile & static
applications for reducing vibration, allowing flexibility within a system and are used for reducing stresses on brackets etc. Using washers ensures a fail-safe mounting system arrangement.
Applications:
Construction Equipment,
Power Generation
Military Vehicles
Off Road & Agricultural
Industrial Machinery &
Equipment.
Material:
Natural Rubber
Rubber balls are used as check or ball valves as screen cleaning and screen de-blinding as air restriction, in flow control and flow meter applications in the pharmaceutical, food and chemical processing industries and in Dewatering industries. They are Corrosion-resistant, Soft, has good electrical insulation and self-lubricating properties, High degree of flexibility and elasticity.
Sandwich Mounts can be loaded in compression, shear or a combination of both by fitting at an angle.
Applications:Engine mountingsGenerator setsHeavy plant & machinery. | Material:Natural Rubber |
Corner guards are designed to give drivers the maximum visibility using Black and Yellow strips, the correct hazard warning colours. The solid rubber guards wrap-around design, protects your property corners, columns and entrances that are exposed to vehicle and warehouse traffic.
The corner guards can be securely fitted to concrete, brick, plain or plastered.
Installation Details:
With metal backup sheet:
Fix the metal backup plate on the wall by drilling 6 holes in a 'Z' format.(Diagonally opposite)
Fasten with GI screw and rawl plug M6 x 40 mm.
Slide the rubber profile over the fixed metal sheet to complete the fixing process.
Installation Details:Without metal backup sheet:
Fix using a combination of epoxy adhesive and mechanical fasteners (GI flat screw)
Size between 4-6 mm as per desired lengths
This mount can be used to great advantage as a solution for bedding problems in mobile appliances and machines or between machine parts that can be flexible in relation to each other. As the rubber supports the movement, this flexible connection does not need to be greased or require maintenance. The VP range has a very high noise and vibration insulating properties which makes it ideal for construction machinery.
Applications:CarsTrain carriagesTractorsAgricultural machines etc. | Materials:Natural Rubber |
Male Conical Buffers are ideal for absorbing shock & impact. These buffers give high levels of deformation under impact /load, and provide a progressive stiffness rate to absorb energy and protect equipment. These can be produced in stainless steel metals and various polymer types. Also available with Female Fixings. For Technical Specification : | Applications:
Color: |
They have an alternate high low ribbed construction and are easy to cut pads. These pads can be cut to be slightly larger than the size of the leg or machine, using shears or knife. They are easy to install. The multiple layers of ribbed mounting pad can also be used to increase deflection.
Metal Sandwich pads are constructed of a steel plate bonded between ribbed anti vibration pads. These pads are Designed for a very high load capacity. | Cork Sandwich Pads are laminated pads having 1/2 thick close grained cork that is securely bonded between two layers of 14 in an alternate low high ribbed neoprene rubber pads.These pads offers highest level of sound attenuation and vibration isolation. It does not need bolting and is easy to install. |
Machinery Leveling Foot Mounts are suitable for isolating vibration from heavy machinery and also acts as a leveling device for un-even flooring.
Applications:Machine ToolsLathesPressesHeavy Industrial Equipment, ConveyorsFood Processing & PharmaceuticalequipmentGenerator Sets. | Material:Natural Rubber |