Our Products
Power, hand asymmetrical 3 roller bending machine is especially designed for thin sheet. Multi-function operation is obtained by changing the folder.
STANDARD VERSION
Heavy ribbed cast-iron worktables
Operating groups adjustment by handwheels
Anodized aluminium sliding table. The hardened steel guideways ensure a perfect sliding(sliding table dimensions 270x124x1600mm)
Squaring frame (960 x 600 mm) complete with telescopic fence, 2 stops and eccentric clamping
Saw blade protection placed on riving knife with exhaust hood 60mm diameter
Simultaneous surface planer tables opening at 90 on internal machine side
Planer protection
Planing and ripping dual purpose fence complete with support (90-45tiltable)
Saw/spindle moulder table extension
Presetting for mortiser
STANDARD VERSION
Ribbed cast-iron worktables
Operating groups adjustment by means of fixed handwheels
Planer protection
Surface planer tables with opening opposite to the operator
Planing fence (1670x150 mm) complete with support
Planer head diam. 72 mm with 3 HSS knives dim. 410 x 30 x 3 mm
Presetting for mortiser
Machine frame made of high stability and high rigidity mono block steel which allows adjustments to be maintained.
STANDARD EQUIPMENT:
Ribbed cast iron worktable with vertical sliding by means of 4 steel screws
Table lifting with 2 speeds and micro-metric sliding
Cutter block with knife-setting device
Readout of working height with decimal control of the quota
Front roller in helical steel
Rear rubber-coated steel roller
In feed and out feed barrier
Main switch
Overload switch protection
Auxiliary low voltage circuit (110 Volt)
Exhaust hood
Manual star-delta start of main motor
Precise, easy and quick adjustment of stock removal rates, with the parallelogram linkage mechanism of the cast iron worktables which guarantees a constant distance between the worktable and the cutter block. Top level performances: 120 mm diameter planer spindle with 4 knives. Stable workpiece support with the rigid surfacing fence with central fixing and sliding smoothly on a round bar.
Surface planer |
|
F2 |
Working width |
mm |
520 |
Max. cutting depth |
mm |
8 |
Surface tables total length |
mm |
2720 |
Anodised surface fence dimensions |
mm |
1200x190 |
Cutterblock with 4 knives |
|
● |
“Tersa” cutterblock with 4 knives |
|
○ |
Mortiser with 16 mm diameter chuck |
|
○ |
Supplementary fence for thin workpieces |
|
○ |
Exhaust hood diameter |
mm |
120 |
Flashcut gives an answer to achieve laser - comparable cutting quality by plasma.
Flash generated from collision of mechanical technology and IT technology
Flash generated from Hugong, Distributor and users.
TheORMAMACCHINE Membrane Press PM/CA/AIRis a machine designed to coat shaped panels either with thermoplasticPVCfoils orVENEERby automatic pressing cycle. The 3D distortion of the coating material is enhanced by the utmost operational versatility and simplicity of this machine.
The innovativeLOADING/UNLOADINGsystem together with an electronic control of all the working functions and an expanding possibility by adding to the existing press a second tray, complete and further qualify this new exclusive realization granting a remarkable technological and qualitative leap which allowsORMAMACCHINEto be considered a worldwide top player in this field.
Platen dimensions |
2500x1400 mm |
|
Inside dimensions of the tray |
2340x1300 mm |
|
Max total thrust |
240 Ton |
|
Stroke |
100 mm |
|
Opening |
100 mm |
|
Max specific pressure |
5 kg/cm2 |
|
Pressing pistons |
4 Nr. |
|
Piston diameter |
140 mm |
|
Auxiliary pistons for fast closing |
2 Nr. |
|
Auxiliary piston diameter |
40/25 mm |
|
Maximum vacuum |
0,5 m/bar |
|
ELECTRIC CONSUMPTION |
|
|
Power supply |
400/3/50 |
V/ph/Hz |
Platen heating |
12 |
kW |
Air heating by heat exchanger |
3 |
kW |
Hydraulic pump |
2,2 |
kW |
Vacuum pump (60 cubic meter/hr) |
2,4 |
kW |
Loading unit motor |
1,5 |
kW |
Plasma Auto Cutting Machine is mainly used to cut thin metal sheets. It simplies the cutting process for specic duct, thus dramatically liberates labor force, improves the working eciency and saves material. It mainly consists of a cutting table, acomputer system plasma generator andCAMduct software.
DESCRIPTION:
Main Features:
HPB Series Hydraulic Press are used for assembling, dismantling, alignment, calendaring, tension, bending and punching. Themachine supplied oil by Italy CNK and CBZ Pump. It could save 60% energy compared with the traditional model. The efficiencyincreased to 2 3 times. It takes the advantage of small volume, high pressure, simple structure and light weight.
All Machines includes:
1.Italy Marzocchi gear pump
2.Press adjustment valve from USA, other valves from Taiwan
3.Main electric components from Schneider
4.Motor from China famous brand
5.With emergency stop
6.With pedal switch
7.With worktable lifting bar
8.With safety protection
9. If width over 1000mm, machine can be two cylinders.
MODEL |
HPB-20 |
HPB-30 |
HPB-50 |
HPB-63 |
HPB-1010 |
CAPACITY |
200 |
300 |
500 |
630 |
1000 |
PRESSURE (MPa) |
25 |
25 |
25 |
30 |
30 |
TRAVEL (mm) |
200+270 |
300+270 |
220+405 |
220+405 |
250+405 |
TABLE SIZE |
200X360 |
300X400 |
400X800 |
400X800 |
460X980 |
DIMENSION (mm) |
1060X500X1400 |
1160X550X1600 |
1500X650X1950 |
1500X650X1950 |
1840X750X2250 730X630X960 |
WEIGHT (kg) |
550 |
650 |
1100 |
1200 |
1420 |
MODEL |
HPB-150 |
HPB-200 |
HPB-300 |
HPB-100 EX |
HPB-150 EX |
CAPACITY |
1500 |
2000 |
3000 |
1000 |
1500 |
PRESSURE (MPa) |
30 |
30 |
30 |
30 |
30 |
TRAVEL (mm) |
250+405 |
300+405 |
300+405 |
300+405 |
300+405 |
TABLE SIZE |
460X980 |
500X1000 |
700X1200 |
420X1300 |
420X1300 |
DIMENSION (mm) |
1840X750X2250 730X630X960 |
1940x950x2350 900X800X1060 |
2100x950x2700 1100X1200X1350 |
2100x750x2250 630X730X960 |
2100x750x2250 630X730X960 |
WEIGHT (kg) |
1750 |
2400 |
4200 |
2100 |
BENIFITS:
Excellent cutting quality in accuracy and cleanness
Very quick cutting speed
Very stable table structure
Low running cost
Good user interface
European and Chinese laser unit are optional
Highly compact style, smaller installation area
High and stable machine quality
Wide applications
Butt welding machine for bandsaw blades, metal bands in general. Reliable, inexpensive and very easy to use. Manual welding and annealing. Shear included
Sharpening Bandsaw Blades
Teeth Profile : Triangular Bandsaw Thickness[min-max] 0.5 - 1.5 mm
Bandsaw Width (min/max) 10-60mm
Sharpening Pitch (min/max) 15-16mm
Sharpening Speed (teeth/min) 33
Setting Bandsaw Blades
Characteristic
Motors Power n 2 x 0.18 kW
Motors Power n 1 x 0.09 kW
Wheel Grinder Dim.[ Ext x Int x Thickness] 150x 20x6
Net - Gross Weight 67 - 124 kg Machine
Dimensions[H x W x D] 260x 82 x 70 cm
Packing Dimensions[H x W x D] 171 x 92 x 81 cm
Cleat Bender is a special designed machine for the processing of ducts. Fold to shape by duct manufacture auto line, and then bend the edges as drive
cleat. It is a compact tool designed to easily manage the laborious task of forming the drive cleat hem.
Here's the Pittsburgh Lock Seam Superior Air Hammer that can cut your finishing time up to 80%. They can be used to fold over or "seam" metal to 22 gauge and lighter on general fabricating, run Pittsburgh Lock Seams on ductwork, tubes, doors, panels, etc. Operators require no special training or skill. The finished seam is neater and more uniform than seams hammered by hand. Fabricating plants using the adapters claim that one operator's production equals that of eight hand-hammering workmen.
C range pumps are of axial piston, swash plate design. The robust running gear is optimized for the needs of pumping Polyol and Isocyanates.
PRODUCT FEATURES
High efficiency and metering accuracy from 7 piston design
5 frame sizes from 2 cc to 62 cc/rev
Corrosion resistant main cases
High inlet pressures
Fixed and variable output options
Easy installation, maintenance and service
Various seal options including magnetic drive couplings
Large bearings for long service life
SMA motors are of heavy duty, radial piston, eccentric configuration. The efficient design includes a hardened high tensile steel crankshaft supported on hydro-static and taper roller bearings.The SMA can withstand both high mechanical and high hydraulic shock loads offering excellent life and continuous high power use. Speed and power ratings are significantly higher than standard high torque low speed (HTLS) motors; our SMA standard models range up to 150:1. Most SMA motors are designed for continuous 350 bar and intermittent 490 bar duty.
PRODUCT FEATURES
Displacements available from 200 16, 400 cc/rev
Continuous pressure of 350bar
Suitable for use with most hydraulic fluids
Withstands high peak pressures
Minimal no-load pressure drop even at high speed
High power options
Two speed options
Rotating case options
Description:
Air refrigerator dryers with thermic mass and aluminum-copper heat exchanger for perfect operating, with Energy Saving technology.
The slitting machinery is especially designed to shear inner-outer round of sheet metal. This slitting machine can slit sheet with the thickness of 1.2mm and can produce a cycle with 1250mm.
Type G1.5X1250, bending grooving machine can form cross-vein. It is light, convenient to move and suitable to produce duct. Five veins bending grooving machine is used to strengthen sheets, it can form several strengthened veins at one time. It is usually used for air conditioning duct manufacture and strengthening case sheet.
TECHNICAL SPECICATIONS:
Horizontal end milling machine with manual feeding, milling at 90. Equipped with spindle at
2800rpm with useful stroke 250mm. Max cutter diameter 160mm. Threephase motor 1, 5 HP
STANDARD EQUIPMENT:
Pneumatic clamping set Turret stop for presetting 6 milling depts Pneumatic lubrification
Nr. 1 cutter block D. 32 mm Full protection guard
ADVANTAGES:
These models are suggested to joinery workshops or companies where joining operation is not full-time required. Thread heating is by electric resistance. The temperature is adjustable by means of commutator. The feed speed is constant.
Bench version (Z 650) is available. Machines are supplied with one thread spool, needles, and tweezers anti adhesive liquid product.
Arm length |
mm |
650 |
Veneer Thickness |
mm |
0,4÷2 |
Feed speed |
m/1’ |
8 |
Total electric power |
kw |
0,18 |
Noise measurement |
dB |
73,5 |
Voltage Single Phase |
Volt |
220 |
Power |
Kw |
0.12 |
Table size |
mm |
2000X1000X930 |
Luminous surface |
mm |
1900X900 |
Weight |
Kg |
150 |
Weight |
Kg |
40 |
Overall dimensions |
mm |
860X320X450 |
Packing overall dimensions |
mm |
900X350X500 |
Main Features:
Welded body with steel plate and high intensity
Main motor is made by Seimens
Adopts pneumatic friction clutch and brake.
Cluster gear adopts the flooding oil lubrication.
Six-face rectangle length guide
Rigid pressing down style overload protector.
JF21-25/25b/45 adopts manual shut height adjustment among these types. JF21-25/45 adopts scale display and JF21-25b with digital display.
JF21-45 ca equip with die set height adjustment motor, the value will be displayed by digital.
JF21-25B, JF21-45 and above type equipped with lifting balance cylinder
Duplex valve imported
JF21-160 and above models adopt grease lubrication system
Balancing cylinder adopts manual lubrication system
Controlled by PLC with internal brand
Buttons, indicators, AC contactors, air circuit breakers and other controlling devices are imported from internal brand.
Equipped with optional air cushion device, automatic feed shaft and photo electric protector, which can use to work with
The machine tools for a total of two forming station, only need to install the corresponding roll, can produce the required 20, 25, 30, 35 and 40 flange clip 20 & 30 flange clip are the standard.
The machine is especially used to strengthen the seam lock and particularly suitable for producing great amount of ducts, it can combine with 3-roller forming machine or 4-roller forming machine to produce the round duct which is of standard appearance and reliable quality. It is easy to install with high efficiency.
Plasma gas conditions
Work pressure range0.3MPa0.5MPa
Gas supply pipe voltage-withstand 1MPa
Gas supply pipe internal dimension8
Gas supply flux40L/min
Filter water from gas and then put it into cutter
A Mechanical Engineering Machine in which the drilling head is mounted to slide along a radial arm which can be rotated, raised, or lowered on a vertical mast to adjust the position of the drill above the work piece.
The machine includes:
Model MS SMART (Fixed ratio) Mixing Head HMGE
Hoses mt 10
Packing
Description of the machine:
STRUCTURE:
The MS SMART machine has a welded frame with two big wheels and supports for easy moving. On the frame are fixed two plastic tanks of 10 lt each for polyol and iso with a cap closing by thread; this system permits the correct alimentation of the pumps. The refilling of the tanks is manual.
PNEUMATIC UNIT:
This unit is the device to move the double effect pumps of the raw materials. It is completed with valve, pressure regulator and gauge. Characteristics: Air consumption 500 Nl/min
METERING:
Two high pressure volumetric pumps are moving by the pneumatic. The pumps of the raw materials work connected directly at the small tanks installed on the frame with also the recycle circuit to discharge the pressure and move the products in line.The total output is 6 Kg/min. max. The ratio is fixed to 100:100 in volume.
PRESSURE GAUGES:
Two pressure gauges show the operating conditions. The devices mount a divider with max operating pressure of 250 bars.
CONTROL PANEL:
The control panel is of easy access and contains all the fuses. It protects the electric circuits and safety system. In front of the panel there are also the following controls:
General main switch
Hoses thermo regulator
Exchanger thermo regulator (option)
Emergency button
MIXING HEAD:
It mounted the electric version of the head gun: the model is HMGE. The mixing head HMGE is selfcleaning by air, with the possibility to use, if needed, flows of other nature to wash the mixing chamber.
Thanks to special adaptor fittings, it is possible to dispense the products by injection, pouring and spraying. The operating system (opening/closing of the mixing head) of the HMGE is manually controlled by the operator or by an electronic timer control with the set of decimal of seconds to repeat the pouring time. The mixing chamber and its block with the seals are easy to replace because connected to the head body by a bayonet system, which makes easier the maintenance reducing the machine stops during working.
Hoses mt 10:
High pressure hoses for each component are in PTFE, completed of attachments and fittings. The hoses are used as resistance with a probe to control the temperature of the material dispensed; the hoses are covering with special foamed insulation on all length.
Spare Parts:
Included kit spare parts of the head gun.
Packing
Machine fixed in a wooden box, with fumigation, barrier sack and gel of silica.
This machine can be used with DUCT AUTO LINE, TDF TRANSVERSE FLANGE DUCT MACHINE or TDC TRANSVERSE FLANGE DUCT MACHINE and PITTSBURGH LOCK MACHINE. The ideal duct connection includes united joint and right-angle side. The seam lock machine HFJ12 works out seam of high quality without help of other auxiliary connecting tool.
The process does nothing to hurt the surface of the work piece with low noise. The finished seam is close, even and effective. Plates in different thicknesses are workable and can be finished quickly and safely. This machine adopts MITSUBISHI PLC to control, with long-time stable working ability, ergonomic design, easy operation and high efficiency.
The Alfamix Series allow to produce parts with low / medium weight with open or closed mold application with the following standard specifications:
OPTIONS:
Main Features:
Tennying and wiring machine includes two types: universal hand tennying and wiring machines. Its mainly used to produce and combine bending grooving of round tube. It can produce different shaped work pieces by special rolling wheels.
Main Features:
Large and heavier belt wheels, can increase of inertia , diameter 38mmnet weight 70 kgs, 20 kgs heavier than the ordinary belt wheels, high wear resistant tin bronze and steel makes the belt wheel.
A Mechanical Engineering Machine in which the drilling head is mounted to slide along a radial arm which can be rotated, raised, or lowered on a vertical mast to adjust the position of the drill above the workpiece.
Our guillotine shear series products are specifically used for shearing thin plates.The guillotine shear is a high-precision type.
FEATURES:
JG-AK Multi-purpose Tool Set is a comprehensive machine with such integrated functions as circle-forming, scrolling, lantern-twisting, angle-bending and other shaping of either round, square or flat steel or pipes.
FEATURES:
This motor-driven hydraulic tool specializes in bending angles. It enables the operators to process square, round or flat metal pieces into various angles and arcs. It is widely used in the furnishing industry.
Cleat Bender is a special designed machine for the processing of ducts.Fold to shape by duct manufacture auto line, and then bend the edges as drive cleat. It is a compact tool designed to easily manage the laborious task of forming the drive cleat hem.
Standard Equipment:
Set of service spanners
Optional Equipment:
Set of steel rollers
Single phase motor
Alkolon bar for rollers making
TECHNICAL DETAILS:
Single head cutting off machine with frontal blade movement.
Pneumatic tilting of the head.
Equipped with TCT saw blade 500 for FAST500, head tilting 20/90/135.
Three phase motor 3HP for FAST500
STANDARD EQUIPMENT:
- TCT saw blade 500
- Nr. 2 horizontal pneumatic clamps
- Nr. 1 vertical pneumatic clamp
- Air filter
- Full protection of the blade
- Air gun