Our Products
Pressing Machine
2 Products availableHydraulic Machines
2 Products availableWe are leaders in the market for providing best range of UNIVERSAL COMBINED MACHINE, COMBINED MACHINE SURFACE /THICKNESS MACHINE, AUTOMATIC EDGE BANDER WITH GLUE POT, THICKNESSING PLANER and MANUAL CLEAT BENDER MACHINE
The machine is simple constructed, Reliable control with easy adjustment and maintenance.
It adopts foot power operation.
Power, hand asymmetrical 3 roller bending machine is especially designed for thin sheet. Multi-function operation is obtained by changing the folder.
STANDARD VERSION
Heavy ribbed cast-iron worktables
Operating groups adjustment by handwheels
Anodized aluminium sliding table. The hardened steel guideways ensure a perfect sliding(sliding table dimensions 270x124x1600mm)
Squaring frame (960 x 600 mm) complete with telescopic fence, 2 stops and eccentric clamping
Saw blade protection placed on riving knife with exhaust hood 60mm diameter
Simultaneous surface planer tables opening at 90 on internal machine side
Planer protection
Planing and ripping dual purpose fence complete with support (90-45tiltable)
Saw/spindle moulder table extension
Presetting for mortiser
STANDARD VERSION
Ribbed cast-iron worktables
Operating groups adjustment by means of fixed handwheels
Planer protection
Surface planer tables with opening opposite to the operator
Planing fence (1670x150 mm) complete with support
Planer head diam. 72 mm with 3 HSS knives dim. 410 x 30 x 3 mm
Presetting for mortiser
STANDARD EQUIPMENT
Worktable made of ribbed-cast iron
Cast-iron saw carriage with lifting by means of "dove-tail" guide and tilting by side supports.
Anodizedaluminium carriage with sliding on high precision hardened steel guide ways.
Rip fence with eccentric locking system and micro-metricadjustment. The fence is equipped with cast-iron support and rectified steel round sliding bar of 45mm.
Table with extension on out-feedside.
Squaring frame (dimensions 1200x650mm). The device, with telescopic swinging arm support, includes a telescopic fence, 2 crosscut flip-over stops, an eccentric clamping and an idle roller for panel loading and unloading.
Saw blade protection placed on riving knife.
Saw unit adjustment by fixed hand wheels.
Readout of saw unit tilting.
Machine frame made of high stability and high rigidity mono block steel which allows adjustments to be maintained.
STANDARD EQUIPMENT:
Ribbed cast iron worktable with vertical sliding by means of 4 steel screws
Table lifting with 2 speeds and micro-metric sliding
Cutter block with knife-setting device
Readout of working height with decimal control of the quota
Front roller in helical steel
Rear rubber-coated steel roller
In feed and out feed barrier
Main switch
Overload switch protection
Auxiliary low voltage circuit (110 Volt)
Exhaust hood
Manual star-delta start of main motor
Precise, easy and quick adjustment of stock removal rates, with the parallelogram linkage mechanism of the cast iron worktables which guarantees a constant distance between the worktable and the cutter block. Top level performances: 120 mm diameter planer spindle with 4 knives. Stable workpiece support with the rigid surfacing fence with central fixing and sliding smoothly on a round bar.
Surface planer |
|
F2 |
Working width |
mm |
520 |
Max. cutting depth |
mm |
8 |
Surface tables total length |
mm |
2720 |
Anodised surface fence dimensions |
mm |
1200x190 |
Cutterblock with 4 knives |
|
● |
“Tersa” cutterblock with 4 knives |
|
○ |
Mortiser with 16 mm diameter chuck |
|
○ |
Supplementary fence for thin workpieces |
|
○ |
Exhaust hood diameter |
mm |
120 |
Flashcut gives an answer to achieve laser - comparable cutting quality by plasma.
Flash generated from collision of mechanical technology and IT technology
Flash generated from Hugong, Distributor and users.
TheORMAMACCHINE Membrane Press PM/CA/AIRis a machine designed to coat shaped panels either with thermoplasticPVCfoils orVENEERby automatic pressing cycle. The 3D distortion of the coating material is enhanced by the utmost operational versatility and simplicity of this machine.
The innovativeLOADING/UNLOADINGsystem together with an electronic control of all the working functions and an expanding possibility by adding to the existing press a second tray, complete and further qualify this new exclusive realization granting a remarkable technological and qualitative leap which allowsORMAMACCHINEto be considered a worldwide top player in this field.
Platen dimensions |
2500x1400 mm |
|
Inside dimensions of the tray |
2340x1300 mm |
|
Max total thrust |
240 Ton |
|
Stroke |
100 mm |
|
Opening |
100 mm |
|
Max specific pressure |
5 kg/cm2 |
|
Pressing pistons |
4 Nr. |
|
Piston diameter |
140 mm |
|
Auxiliary pistons for fast closing |
2 Nr. |
|
Auxiliary piston diameter |
40/25 mm |
|
Maximum vacuum |
0,5 m/bar |
|
ELECTRIC CONSUMPTION |
|
|
Power supply |
400/3/50 |
V/ph/Hz |
Platen heating |
12 |
kW |
Air heating by heat exchanger |
3 |
kW |
Hydraulic pump |
2,2 |
kW |
Vacuum pump (60 cubic meter/hr) |
2,4 |
kW |
Loading unit motor |
1,5 |
kW |
Plasma Auto Cutting Machine is mainly used to cut thin metal sheets. It simplies the cutting process for specic duct, thus dramatically liberates labor force, improves the working eciency and saves material. It mainly consists of a cutting table, acomputer system plasma generator andCAMduct software.
DESCRIPTION:
Main Features:
HPB Series Hydraulic Press are used for assembling, dismantling, alignment, calendaring, tension, bending and punching. Themachine supplied oil by Italy CNK and CBZ Pump. It could save 60% energy compared with the traditional model. The efficiencyincreased to 2 3 times. It takes the advantage of small volume, high pressure, simple structure and light weight.
All Machines includes:
1.Italy Marzocchi gear pump
2.Press adjustment valve from USA, other valves from Taiwan
3.Main electric components from Schneider
4.Motor from China famous brand
5.With emergency stop
6.With pedal switch
7.With worktable lifting bar
8.With safety protection
9. If width over 1000mm, machine can be two cylinders.
MODEL |
HPB-20 |
HPB-30 |
HPB-50 |
HPB-63 |
HPB-1010 |
CAPACITY |
200 |
300 |
500 |
630 |
1000 |
PRESSURE (MPa) |
25 |
25 |
25 |
30 |
30 |
TRAVEL (mm) |
200+270 |
300+270 |
220+405 |
220+405 |
250+405 |
TABLE SIZE |
200X360 |
300X400 |
400X800 |
400X800 |
460X980 |
DIMENSION (mm) |
1060X500X1400 |
1160X550X1600 |
1500X650X1950 |
1500X650X1950 |
1840X750X2250 730X630X960 |
WEIGHT (kg) |
550 |
650 |
1100 |
1200 |
1420 |
MODEL |
HPB-150 |
HPB-200 |
HPB-300 |
HPB-100 EX |
HPB-150 EX |
CAPACITY |
1500 |
2000 |
3000 |
1000 |
1500 |
PRESSURE (MPa) |
30 |
30 |
30 |
30 |
30 |
TRAVEL (mm) |
250+405 |
300+405 |
300+405 |
300+405 |
300+405 |
TABLE SIZE |
460X980 |
500X1000 |
700X1200 |
420X1300 |
420X1300 |
DIMENSION (mm) |
1840X750X2250 730X630X960 |
1940x950x2350 900X800X1060 |
2100x950x2700 1100X1200X1350 |
2100x750x2250 630X730X960 |
2100x750x2250 630X730X960 |
WEIGHT (kg) |
1750 |
2400 |
4200 |
2100 |
BENIFITS:
Excellent cutting quality in accuracy and cleanness
Very quick cutting speed
Very stable table structure
Low running cost
Good user interface
European and Chinese laser unit are optional
Highly compact style, smaller installation area
High and stable machine quality
Wide applications
Butt welding machine for bandsaw blades, metal bands in general. Reliable, inexpensive and very easy to use. Manual welding and annealing. Shear included
Cleat Bender is a special designed machine for the processing of ducts. Fold to shape by duct manufacture auto line, and then bend the edges as drive
cleat. It is a compact tool designed to easily manage the laborious task of forming the drive cleat hem.
Here's the Pittsburgh Lock Seam Superior Air Hammer that can cut your finishing time up to 80%. They can be used to fold over or "seam" metal to 22 gauge and lighter on general fabricating, run Pittsburgh Lock Seams on ductwork, tubes, doors, panels, etc. Operators require no special training or skill. The finished seam is neater and more uniform than seams hammered by hand. Fabricating plants using the adapters claim that one operator's production equals that of eight hand-hammering workmen.
STANDARD EQUIPMENT:
Abrasive grindstone
Base Electrical board V.400
Cooling system with pump
Description:
Air refrigerator dryers with thermic mass and aluminum-copper heat exchanger for perfect operating, with Energy Saving technology.
The slitting machinery is especially designed to shear inner-outer round of sheet metal. This slitting machine can slit sheet with the thickness of 1.2mm and can produce a cycle with 1250mm.
SMA motors are of heavy duty, radial piston, eccentric configuration. The efficient design includes a hardened high tensile steel crankshaft supported on hydro-static and taper roller bearings.The SMA can withstand both high mechanical and high hydraulic shock loads offering excellent life and continuous high power use. Speed and power ratings are significantly higher than standard high torque low speed (HTLS) motors; our SMA standard models range up to 150:1. Most SMA motors are designed for continuous 350 bar and intermittent 490 bar duty.
PRODUCT FEATURES
Displacements available from 200 16, 400 cc/rev
Continuous pressure of 350bar
Suitable for use with most hydraulic fluids
Withstands high peak pressures
Minimal no-load pressure drop even at high speed
High power options
Two speed options
Rotating case options
ADVANTAGES:
These models are suggested to joinery workshops or companies where joining operation is not full-time required. Thread heating is by electric resistance. The temperature is adjustable by means of commutator. The feed speed is constant.
Bench version (Z 650) is available. Machines are supplied with one thread spool, needles, and tweezers anti adhesive liquid product.
Arm length |
mm |
650 |
Veneer Thickness |
mm |
0,4÷2 |
Feed speed |
m/1’ |
8 |
Total electric power |
kw |
0,18 |
Noise measurement |
dB |
73,5 |
Voltage Single Phase |
Volt |
220 |
Power |
Kw |
0.12 |
Table size |
mm |
2000X1000X930 |
Luminous surface |
mm |
1900X900 |
Weight |
Kg |
150 |
Weight |
Kg |
40 |
Overall dimensions |
mm |
860X320X450 |
Packing overall dimensions |
mm |
900X350X500 |
TECHNICAL SPECICATIONS:
Horizontal end milling machine with manual feeding, milling at 90. Equipped with spindle at
2800rpm with useful stroke 250mm. Max cutter diameter 160mm. Threephase motor 1, 5 HP
STANDARD EQUIPMENT:
Pneumatic clamping set Turret stop for presetting 6 milling depts Pneumatic lubrification
Nr. 1 cutter block D. 32 mm Full protection guard
Type G1.5X1250, bending grooving machine can form cross-vein. It is light, convenient to move and suitable to produce duct. Five veins bending grooving machine is used to strengthen sheets, it can form several strengthened veins at one time. It is usually used for air conditioning duct manufacture and strengthening case sheet.
C range pumps are of axial piston, swash plate design. The robust running gear is optimized for the needs of pumping Polyol and Isocyanates.
PRODUCT FEATURES
High efficiency and metering accuracy from 7 piston design
5 frame sizes from 2 cc to 62 cc/rev
Corrosion resistant main cases
High inlet pressures
Fixed and variable output options
Easy installation, maintenance and service
Various seal options including magnetic drive couplings
Large bearings for long service life
Main Features:
Welded body with steel plate and high intensity
Main motor is made by Seimens
Adopts pneumatic friction clutch and brake.
Cluster gear adopts the flooding oil lubrication.
Six-face rectangle length guide
Rigid pressing down style overload protector.
JF21-25/25b/45 adopts manual shut height adjustment among these types. JF21-25/45 adopts scale display and JF21-25b with digital display.
JF21-45 ca equip with die set height adjustment motor, the value will be displayed by digital.
JF21-25B, JF21-45 and above type equipped with lifting balance cylinder
Duplex valve imported
JF21-160 and above models adopt grease lubrication system
Balancing cylinder adopts manual lubrication system
Controlled by PLC with internal brand
Buttons, indicators, AC contactors, air circuit breakers and other controlling devices are imported from internal brand.
Equipped with optional air cushion device, automatic feed shaft and photo electric protector, which can use to work with
Machine Features:
Spindle Moulder With Sliding Table and Fixed or Tilting Spindle
Self-Braking Motor
Spindle Moulder Special Fence for Shaping Operations
Spindle Moulder Unit Adjustment Hand Wheels Ergonomically Positioned on the Front of the Machine
Anodized Aluminium Alloy Carriage
Spindle Moulder Reverse Rotation
Spindle Moulder Speed Readout by Leds
Adjustable Spindle Moulder Fence with Micrometric Adjustment
Device for Angular Cutting With 2 Flip-Over Stops
STANDARD SETTING
Manual tool-holder sha li ing, complete with mechanical readout of working height
Manual tool-holder sha li ing, complete with mechanical readout of working angle
Fixed spindle moulder fence (version with electrical protections complete with exhaust hood (max. tool diameter 240mm for TI105)
3500/6000/8000/10000 rpm, 50Hz spindle speed
Electric speed display dial
Emergency push button
Safety micro switch on motor access door
Pad-lockablemain switch
Overload switch protection
Auxiliary low voltage circuit (110 volt)
Mechanical brake on main motor
TECHNICAL SPECIFICATIONS:
Table dimension 530 x 230mm
Max.slot depth 220mm
Max.slot length 200mm
Vertical stroke 200mm
Mortising chuck Wescott 0-16
Chuck speed 2800rpm
Motor power 2hp
Weight 250 kgs
STANDARD EQUIPMENT:
Steel Guides
Eccentric clamp
Dust extraction hood 80 mm
Description:
Standard Devices:
- Automatic shifting frame to avoid the cutting of the plastic strips during horizontal cuts
- Self-braking motor
- Aluminum supports with phenolic for safe support of the panels
- Pneumatic lift up roller for a better sliding of the panels
- Rollers-up warning light
- N2 Stops for vertical cuts
- Short piece cutting device
- Pneumatic control, by switch, from vertical to 45 and viceversa
- Vacuum Pump HP.1.
Plasma gas conditions
Work pressure range0.3MPa0.5MPa
Gas supply pipe voltage-withstand 1MPa
Gas supply pipe internal dimension8
Gas supply flux40L/min
Filter water from gas and then put it into cutter
A Mechanical Engineering Machine in which the drilling head is mounted to slide along a radial arm which can be rotated, raised, or lowered on a vertical mast to adjust the position of the drill above the work piece.
The machine is especially used to strengthen the seam lock and particularly suitable for producing great amount of ducts, it can combine with 3-roller forming machine or 4-roller forming machine to produce the round duct which is of standard appearance and reliable quality. It is easy to install with high efficiency.
The Alfamix Series allow to produce parts with low / medium weight with open or closed mold application with the following standard specifications:
OPTIONS:
Tennying and wiring machine includes two types: universal hand tennying and wiring machines. Its mainly used to produce and combine bending grooving of round tube. It can produce different shaped work pieces by special rolling wheels.
Main Features:
Main Features:
Large and heavier belt wheels, can increase of inertia , diameter 38mmnet weight 70 kgs, 20 kgs heavier than the ordinary belt wheels, high wear resistant tin bronze and steel makes the belt wheel.
FEATURES:
JG-AK Multi-purpose Tool Set is a comprehensive machine with such integrated functions as circle-forming, scrolling, lantern-twisting, angle-bending and other shaping of either round, square or flat steel or pipes.
FEATURES:
This motor-driven hydraulic tool specializes in bending angles. It enables the operators to process square, round or flat metal pieces into various angles and arcs. It is widely used in the furnishing industry.