lift n shift

dubai, United Arab Emirates

Capacity 320 - 7500 kg

Electric winches of the series BETA-EX are designed according to the EU Directives 94/9/EG and MRL 2006/42/EG. The models are usable in any place, where the risk of ignition of explosive atmosphere exists (Mixture of air, gases, fumes and dust/air-mixture, respectively). Due to a specially-tailored modular system, the suitable winch for each individual application can be put together easily. The BETA-EX is characterized by the excellent workmanship in connection with the reliable and stable gear motors

Features

• Electric control incorporated in a flame-proof housing Ex II 2 GD de IIB T4 T 135 C
• Electric control not ATEX-compliant (Mounting outside of ATEX-area)
• Hand-actuated auxiliary switch in ATEX-design with Up/Down and emergency stop for an enhanced operating safety.
• From a load capacity of 1000 kg equipped as standard with an overload protection.
• Standard operating voltage: Euro-voltage 380 - 420 V, 3-phase, 50 Hz
• Insulation class F
• Grooved drum and one rope fixation on each flanged wheel
• Suitable ambient temperature -20 C up to +40 C.

Application area

Chemical or petrochemical industry, biogas plants, paint shops

Options

• Different ambient temperatures
• Different operating voltages
• Electric overload protection for winches with a load capacity below 1000 kg
• Infinitely variable speed regulation
• Rope pressure drum
• Slack rope switch
• Gear limit switch
• Special surface coating
• Multi compartment drum or drum extensions for a higher rope capacity.
• Sheaves, pulley blocks (ATEX-compliant Ex II 2 GD IIB T4 135 C IP 65).
• Special ropes for ATEX-areas with copper-plated load hook.

• Material: Drop forged, Grade 8, quenched and tempered
• Safety Factor: MBL equals 2 x Lashing Capacity
• Standard: EN 12195-3
• Finish: Painted red
• Certification: Test certificates can be supplied upon request
• Note: Stf = 3000 daN

Features

By flattening the surface of outer wires of each strand, this Plane Contacting Lay construction has flat/touch area of outer wires. Compared to round strand type rope, it has higher breaking load.

Characteristics

• Good abrasion-resistance and excellent crushing resistance
• Much higher breaking strength compared to round strand type rope
• High tensile strength and superior non-rotating characteristics

• Material: Bridge: Drop forged high tensile steel SAE 1045 U-Bolt: SAE 1015
• Standard: EN 13411-5 Type B Formerly U.S. Federal Specification FF-C-450D
• Finish: Hot dipped galvanized Nuts for diameter bow 5 and 6 mm are electro-galvanized
• Certification: A works certificate can be supplied upon request

A Lanyard is described as a connecting element of a system which is a critical link that joins the harness to the Anchorage point. "LIFTMAN" offers an exhaustive range of Lanyards made of Twisted Rope, Kernmantle Rope and Webbing.

• Take into consideration the mode of use and the nature of the load to be secured.
• The size, shape and weight of the load, together with the intended method of use, transport environment and the nature of the load will affect the correct selection.
• For stability reasons free-standing units of load have to be secured with a minimum of one pair of web lashing for frictional lashing and two pairs of web lashing for diagonal lashing.
• Do not use different lashing equipment (e.g. lashing chain and web lashings) to lash the same load.
• Plan lifting and removal operations before starting the journey.
• Keep in mind that the load may have shifted during the journey.
• Do not use cargo lashing systems for lifting purposes.

All systems can be provided in any length.

Standard length: 10m

• Flat webbing sling
• Slings with metal fittings
• Multi-leg Slings
• Special Slings
• Round Slings
• Cargo Lashings
• Tow Strap
• Recommendations for use
• Inspection criteria for webbing slings
• Our identification
• Miscellaneous
• Guides
• Our certifications
• Our identification
• The Fall Arrest Guide
• The Lifting & Lashing Solutions Guide

• Material: High tensile steel
• Finish: Hot dipped galvanized
• Temperature Range: -20oC upto +200oC
• Certification: A works certificate, proof load test certificate and EC Declaration of Conformity can be supplied upon request

LIFT N SHIFT provides a vast range of Permanent Horizontal & Vertical Anchorage Lines, Conforming to EN 795 Type C. These systems are corrosion resistant and can be fixed on various structures to provide safe anchorage for extended period of time.

• Material: High tensile steel
• Finish: Hot dipped galvanized
• Temperature Range: -20oC upto +200oC
• Certification: A works certificate, proof load test certificate and EC Declaration of Conformity can be supplied upon request

• Material: Drop forged high tensile steel SAE 1035 or 1045
• Safety Factor: MBL equals 5 x WLL
• Standard: Generally to ASTM F1145-92 formerly U.S. Federal Specification FF-T-791b
• Finish: Hot dipped galvanized
• Certification: A works certificate, proof load test certificate and/or EC Declaration of Conformity can be supplied upon request

Dedicated Electric Chain Hoist The HITACHI low head room type has a smaller Z dimension (minimum distance between the rail bottom surface and the lower hook) making it effective for work that hoists the cargo as high as possible in structures with a low ceiling.Low head room type

• Material: Alloy steel, Grade 8, quenched and tempered
• Safety Factor: MBL equals 4 x WLL
• Standard: EN 1677-3
• Finish: Painted yellow (J) or red (R)
• Certification: At no extra charge this product can be supplied with a works certificate, a 3.1 material certificate, and/or EC Declaration of Conformity
• Note: From 12.8 t without flat part

Nylon Rope has twice the strength of Manila rope. It has high elongation (under load) when compared to other synthetic ropes. Nylon has high energy absorption under shock and good abrasion resistance. When combined, these characteristics make nylon rope the best in handing compared to other synthetics. It is utilized extensively in marine use such as mooring lines, towing slings, commercial fishing, utility rope, leisure boating, and sailing etc.

NYLON FIBER

• Fiber Content :Nylon fiber
• Specific gravity :1.14
• Melting Point :220
• Elongation at break :45% (8S/T), 30% (12S/T)
• Water absorption :2 5%

details :

• The Megapod is equipped with high quality, rugged systems that will ensure top performance when it is needed the most.
• SALVATOR Megapod is made from Aluminium hence is extremely lightweight and portable, easily set-up by just one worker and can be transported from one work area to another.
• Ideal for confined space entry and emergency rescue applications. Can be used easily with all SALVATOR Winches and fall arrest devices eg. Blocks
• Comes with Adjustable height from 1.32 m to 2.13 mfrom ground level.
• Minimum & Maximum distance between the legs : 0.96m & 1.72m.
• Inner & Outer Adjustment can be achieved by Sliding Telescope Legs.
• Provided with a Pulley system (steel cable guiding) for fitment of Winch.
• Can be used with all the Winches namely RV 801, RV 817, RV 818, Retrieval Fall Arrester Blocks RV PCGS 10, RV PCGS 20 & RV PCGS 30 with the help of their specialized mounting brackets respectively.
• This Megapod is provided with Megapod bag Ref. BG 62

Other significant features of SALVATOR Megapod :

• Locking legs
• Simple detent pin style adjustment
• Quick-mount mechanical device bracket
• Safety chain to prevent movement, and safety shoes that incorporate a rubber sole for flat surfaces, and spiked edges for slippery surfaces.

LENGTH- 7 ft

SPECIFICATION

• Fully adjustable telescopic legs, adjustable height from 1.32m to 2.13m
• Wheelbase (Footprint) : 1.21m to 2.0m Diameter
• Weight : 18.9 kg
• Maximum Load Capacity : 500kg

COMPLIANCE-EN 795:2012 Type B / ANSI Z359.1

• Material: Alloy steel, Grade 8, quenched and tempered
• Safety Factor: MBL equals 4 x WLL
• Standard: EN 1677-2
• Finish: Painted yellow (J) or red (R)
• Certification: At no extra charge this product can be supplied with a works certificate, a 3.1 material certificate, and/or EC Declaration of Conformity
• Note: From 8.2 t without flat part

• Materialbow and pin high tensile steel, Grade 6, quenched and tempered
• Safety FactorMBL equals 6 x WLL
• StandardEN 13889 and meets performance requirements of US Fed. Spec. RR-C-271 Type IVA Class 2, Grade A
• Finishhot dipped galvanized
• Temperature Range-20C up to +200C
• Certificationat no extra charges this product can be supplied with a works certificate, 3.1 material certificate, manufacturer test certificate, EC Declaration of Conformity and all shackles starting from 2 t can be supplied with DNV 2.7-1 certificate
• Notefor details on dimensions and tolerances please consult our CAD drawings, these are available on request.

Lever Block

• Material: Alloy steel, Grade 8, quenched and tempered
• Safety Factor: MBL equals 4 x WLL
• Standard: EN 1677-2
• Finish: Painted yellow (J) or red (R)
• Certification: At no extra charge this product can be supplied with a works certificate, a 3.1 material certificate, and/or EC Declaration of Conformity
• Note: Equipped with needle roller thrust bearing

details :

• Dorsal attachment D-ring for Fall Arrest adjustable Chest-Strap and thigh-straps; for easy adjustment.
• Shoulder and thigh-straps differentiated by a dual colour scheme Ideallyy positioned sit-strap for extended comfort
• Conforms to EN 361:2002
• Static Strength : 25kN