Post Your Requirement Menu

Welcome User

Other Products / Services

We offer the best product range of IMMERSION PUMPS MPS, I-MAT Variable speed system, IMMERSION PUMPS MXS, ARIAMAT and MULTI-STAGE PUMPS MXV-B.

IMMERSION PUMPS MPS

  • FLOW 1 / 7.2
  • HEAD 8 / 78.5
  • POWER 0.45 / 1.5

Close coupled multi-stage submersible pumps. External jacket in stainless steel AISI 304 and stages Noryl.MPSM with built-in capacitor, accessible through the delivery casing.Hydraulics located below the motor with the motor cooled by the pumped fluid. Safe operation is possible with the motoronly partially submerged.Double shaft seal with oil chamber.The suction strainer prevents the entrance of solids with diameter bigger than 2 mm.

View Complete Details

IMMERSION PUMPS MXS

  • FLOW 1 / 11
  • HEAD 12 / 105
  • POWER 0.55 / 3

Close coupled multi-stage submersible pumps. All parts in contact with the fluid both internal and external are in chrome-nickle stainless steel. MXSM with built-in capacitor, accessible through the delivery casing. Hydraulics located below the motor with the motor cooled by the pumped fluid. Safe operation is possible with the motor only partially submerged. Double shaft seal with oil chamber. The suction strainer prevents the entrance of solids with diameter bigger than 2 mm.

View Complete Details

I-MAT Variable speed system

Variable speed system driven by frequency converter for the motor control in the water supply applications and in the production distribution of hotcold water.I-MAT is an integrated control system which, applied to the motor, allows to manage a wide range of applications and operating modes.

View Complete Details

ARIAMAT

The automatic air feeder ARIAMAT controls the air cushion in the pressu- re vessel by replacing the air dissolved in the water at every pump start. This device limits the number of pump starts and stops, allows a better use of the water reserve and improves the overall performance of the automa- tic pressure system.ARIAMAT operation is explained in pictures 1-2-3-4.At the end of every cycle, ARIAMAT AR 300E, AR 1000E and AR 2000E let in the vessel 300, 1000 and 2000 cm3 of air respectively.For a good operation of ARIAMAT it is necessary to have enough suc- tion pressure in the pipe whilst the pumps are running.If the pumps work under positive suction head and water falls to the suction inlet, there will not be enough suction pressure in the suction pipe to allow a correct operation of ARIAMAT; in this case, it is neces- sary to create an artificial loss in the suction pipe, by closing gradual- ly the gate valve when the pump is running until the water level in the ARIAMAT starts dropping.When a sufficient suction pressure to grant a safe ARIAMAT operation cannot be achieved, it is recommended to feed the vessel with a com- pressed air system and level probes.

View Complete Details

MULTI-STAGE PUMPS MXV-B

  • Power 0.75 / 7.5
  • FLOW 1 / 25
  • HEAD 9 / 120

Vertical multi-stage close coupled pumps with suction and delivery connections of the same diameter and arranged along the same axis (in-line). All parts that come into contact with the liquid, including wet-end covers, are in chrome-nickel stainless steel with corrosionresistant bearing sleeves lubricated by the pumped liquid.

View Complete Details

pompe

  • Serie CS-P

Questa serie di pompe centrifughe monostadio sono costruite con aspirazione assiale e con robusto supporto, sede di cuscinetti a bagno d'olio che guidano l'albero di trasmissione. Questa soluzione tecnologicamente avanzata è studiata in modo che la costruzione delle pompe monostadio avvenga con sistema modulare. Dette pompe vengono applicate a: Motori elettrici 1450 g1' Motori diesel a regime di giri variabile Motori a benzina a regime di giri variabile IMPIEGHI: - Liquidi puliti aggressivi e non aggressivi - Impianti di condizionamento e raffreddamento - Impianti di irrigazione - Impianti antincendio - Acquedottistica Le pompe sono costruite per soddisfare le diverse esigenze, infatti la gamma comprende pompe a bassa, media e alta prevalenza. VERSIONI: S= interamente in ghisa (per liquidi non corrosivi) BRX= girante in bronzo con albero in acciaio inox ( per liquidi leggermente corrosivi) TBX= interamente in bronzo con albero in acciaio inox ( per liquidi altamente corrosivi)

View Complete Details

FIRE-FIGHTING SETS

  • FLOW 1.5 / 570
  • HEAD 10 / 95
  • POWER 0.45 / 55x3

Pressure boosting sets with 1 to 6 fixed speed pump.Sets with 4, 5 and 6 pumps on request.Depending on the reduction of the pressure in the system, the pressure switches determine the starting up of the pumpsin sequence and the microprocessor alternates the starts.

View Complete Details

IMMERSION PUMPS SFM

  • FLOW 0.3 / 2.7
  • HEAD 1.2 / 70.6
  • POWER 1.4

Submersible borehole pumps for 4” deep wells (DN 100 mm), with turbine impeller. The special plastic and stainless steel hydraulic materials prevent the impeller from locking even after long stationary periods. Thanks to special construction features, both installation and maintenance of SFM 70 are fast and easy. Delivery port G 1.

View Complete Details

Motors

Asynchronous three phase motors shaft height 56 to 315 (standards motors to IEC DIN)- Protection IP 55 and higher. Asynchronous three phase pole changing motors (constant moment and for fan drives). Explosion protected motors EEx e (certified by the German PTB) and Ex n (certified by the Spanish LOM). Brake motors. Asynchronous single phase motors frame size 56 to 100 Energy saving motors (with high and improved efficiency eff1 and eff2).Converter fed asynchronous motors. Marine motors according to the most important international classification societies. Aluminum housing up to frame size 180 (end shield cast iron from frame size 132)

View Complete Details

Fire Pump

  • Flow 25 US GPM to 500 US GPM
  • Head 82 PSI to 132 PSI.

METEL GROUP ABOUT US HISTORY VISION & MISSION DIRECTORS MESSAGE OUR STAFF GROUP OF COMPANIES MTL MIL MEW PRODUCTS MTL MIL MEW ASSOCIATIONS CERTIFICATES CAREERS CONTACT OUR LOCATIONS ENQUIRIES Industries Industries Facilities Management Division Metel Industries Supply quality fire protection pump packages and the pumps are UL listed and manufactured to NFPA standards. Calpeda –Metel End suction pumps are approved from 25 GPM to 500 GPM, with pressures from 82 psi to 124 psi .Fire pump sets are available in different sizes and all based on NFPA requirements. MIL assembles high quality, low-emission diesel generator sets with Daewoo engines Perkins Cummins and Marelli Mecc Alte ABB Leroy Sommer Stamford alternators to cater to the market with a competitive price to the clients. The generators build with captive as well as stand-by power with manual, semi automatic and automatic control panels, with sound attenuated units packaged at our factory. The electric control panels are manufactured and customized by MIL to suit customer requirement. MIL offers a complete range of products and services, supporting clients from concept to completion. We offer affordable and extensive standard products. CALPEDA-METEL UL LISTED FIRE PUMP Calpeda – Metel UL listed fire pump set includes diesel driven fire pump, Electric driven fire pump, Electric driven Jockey pump, Electric motor control panel, Diesel engine control panel and Jockey control panel, Flow meter, pressure Gauges. Pumps are Dubai and Qatar civil defense approved.

View Complete Details

EBITT FIRE PUMP

  • Flow 200 US GPM to 2000 US GPM
  • Head 87 PSI to 190 PSI.

EBITT UL listed fire pump set includes diesel driven fire pump , Electric driven fire pump , Electric driven Jockey pump , Electric motor control panel , Diesel engine control panel and Jockey control panel , Flow meter, pressure Gauges.

View Complete Details

Booster Water Pump

Booster pumps sets with 2 or more pumps in parallel, designed and built to meet the most common requirements in terms of water pressure maintenance in residential, commercial, industrial and agricultural installations in a reliable manner. Booster pumps can be designed to function duty, stand-by or assist mode. The sets are available with PRESSURE vessels fitted to the discharge manifold .Control panels for the booster pumps will be designed as per customer requirements. CAST IRON CONSTRUCTION PUMPS WITH GALVANISED IRONS.SCU MANIFOLDS STAINLESS STEEL CONTRUCTION PUMPS WITH GALVANISED IRONS.SCU MANIFOLDS

View Complete Details

TRANSFER WATER PUMP

Transfer pumps sets with 2 or more pumps in parallel, designed and built to meet the most common requirements in terms of transfer of water in residential, commercial, industrial and agricultural installations in a reliable manner. Transfer pumps can be designed to function on duty, stand-by or assist mode. The sets are available with PRESSURE vessels fitted to the discharge manifold .Control panels for the booster pumps will be designed as per customer requirements. CAST IRON CONSTRUCTION PUMPS WITH GALVANISED IRONS.SCU MANIFOLDS STAINLESS STEEL CONTRUCTION PUMPS WITH GALVANISED IRONS.SCU MANIFOLDS

View Complete Details

SINGLE WATER PUMP

The pump and the motor shall be assembled on a common base frame using flexible coupling.CHILLER PUMP SETS SINGLE CENTRIFUGAL WATER PUMP SETS

View Complete Details

Control Panel

VFD Control panels can be designed as per the customer water requirements.VARIABLE FREQUENCY CONTROL PANEL FOR PUMPS

View Complete Details

Diesel Generator

Diesel generator sets with Daewoo engines Perkins Cummins and Marelli Mecc Alte ABB LEROY SOMMER STAMFORD alternators.

View Complete Details

SEWAGE PUMPING SYSTEM

We offer complete solution for the sewage pumping stations with installation, commissioning with control panels, guide rails and chains.

View Complete Details

Headsets

We are the authorized distributors for the full range of corded, wireless and Bluetooth headsets.HEADSETS

View Complete Details

telephones

We offer various types of standard analogue phones such as CLIP, feature phones, hotel phones, bathroom phones etc. All our phone sets are UAE LAB approved.

View Complete Details

distribution frames

We mostly offer versatile digital and optical fiber distribution frames with greater density customized to the needs of the customer.

View Complete Details

structured cabling

We have a ready stock of structured cabling products such as copper cables, copper accessories, fibre cables, fibre accessories, metal cabinets and coaxial cables. We have the ability to provide quality, competitive prices and customer service in the structured wiring industry.

View Complete Details

Connectors

Our connectors are extensively used in 75ohm communication systems and have become a recognized standard in UAE today. With Quick Termination technology our connectors reduce assembly time and loose parts and make termination simple.

View Complete Details

Ghee

Verka Ghee is a brand known in all the homes in India, and we have also marketed Awwal, its counterpart to best suit different market segments. These are a favorite of Indians, Pakistanis and other South Asian communities. To reach our more international clientele, Metel introduces KKG Pure Ghee, from New Zealand, specially packaged in Malaysia, for MTL to best serve our customers.

View Complete Details

Pickles

Complete range of Pickles in Mango, Chilly, Lemon and Mixed Flavors also with our Sohna Brand from Punjab, India.

View Complete Details

Milk Powder

From New Zealand, packaged in Malaysia, MILKO Skimmed Milk Powder & Whole Milk Powder are of the best quality of Milk, packaged in tins and pouches for the convenience of our customers.

View Complete Details

Canned Food

Our Italian brand, bringing in a touch of Europe in the Middle East, Clada Chick Peas & Red Kidney Beans are for those who believe in a healthy lifestyle.

View Complete Details

Oil

Al Aidani Sunflower and Cooking Oils are pure and healthy, sourced from Malaysia, and packaged specially for MTL. These Oils are Zero Cholesterol and have no TransFats, ensuring a healthier lifestyle.

View Complete Details

IMMERSION PUMPS CS

  • Size 4”, 6”, 8” and 10"

The Calpeda 4”, 6”, 8” and 10" submersible motors are built using advanced technology and components of superior quality that they ensure goodn mechanical strength and excellent electrical reliability. The good performances are guaranteed thanks to strict tests of all the different components during the various production phases.

View Complete Details

Submersible pumps

  • Size 40 mm.

High-performance, compact stainless steel submersible pumps for optimal service in household installations and small civil plants. Two different types of hydraulics are available for the maximum flexibility:DRENO (DR steel) with multi-channel open impeller for applications with clear or slightly soiled wastewaters DRAGA (DG steel) impeller for applications with heavily soiled wastewaters and solid bodies, thanks to the free passage of up to 40 mm. The cooling system allows these pumps to be used even when only partially submerged and in particular the DR steel version is easily converted into a dry floor pump, with suction levels as little as 5 mm above the ground. Every model undergoes pressurised testing to guarantee perfect assembly and operation of the gaskets, cable gland and mechanical seals.

View Complete Details

blue pumps

  • colour blue

The blue Series is intended mainly for domestic and residential installations and provides compact size and outstanding reliability. Versions are available with two different hydraulics: DRENO (DR blue) with multi-channel open impeller for clear or slightly soiled wastewaters. DRAGA (DG blue), with vortex impeller and large free passage for pumping wastewaters with heavy soil, for use with blueBOX lifting stations Meticulous design and the use of high-grade materials allow easy maintenance and make the replacement of parts subject to wear simple and less frequent than on other models in the same price band. Every model undergoes pressurised testing to guarantee perfect assembly and operation of the gaskets, cable gland and mechanical seals.

View Complete Details

electric submersible pumps

  • Series bluePRO

The bluePRO Series is intended for use in applications requiring high performance or prolonged, heavy-duty operation in domestic and residential contexts. Versions are available with four different hydraulics: DRENO (DR bluePRO) with multi-channel open impeller for clear or slightly soiled wastewaters DRAGA (DG bluePRO), with vortex impeller and large free passage for wastewaters with heavy soil GRINDER (GR bluePRO), with cutter system HIGH HEAD (AP bluePRO), with multi-channel open impeller and high head. They are designed to provide optimal service with blueBOX lifting stations. Models with vertical discharge have a breather allowing them to be primed without touching the system even after the tank has been completely emptied. All components are designed to deliver outstanding reliability and ensure quick, easy maintenance. Every model undergoes pressurised testing to guarantee perfect assembly and operation of the gaskets, cable gland and mechanical seals.

View Complete Details

electric submersible pumps

Lightweight, reliable cast iron submersible pumps. Versions are available with two different hydraulics: DRENO (DRE) with multi-channel open impeller for clear or slightly soiled wastewaters. DRAGA (DGE), with vortex impeller and large free passage for wastewaters with heavy soil. The compact size and horizontal and vertical discharge allow any installation, even in existing plants or small pits. Every model undergoes pressurised testing to guarantee perfect assembly and operation of the gaskets, cable gland and mechanical seals. E Series models are suitable mainly for permanent installations yet, thanks to their convenience and ease of handling, they can also be used in emergencies for pumping-out flooding premises or for temporary installations for pumping from wells and tanks. Intended mainly for domestic use, these pumps are recommended for pressurising small plants, for garden sprinkler systems, for supplying fountains, for emptying swimming-pools or tanks and for pumping out flooded cellars or garages.

View Complete Details

IMMERSION PUMPS SDX

  • FLOW 6 / 120
  • HEAD 8.2 / 700
  • POWER 2.2 / 110

Submersible borehole pumps for 6” wells (DN 150 mm) and 8” (DN 200 mm). 6, 8SDX: with external jacket and stages in stainless steel AISI 304. 6, 8SDXL: with external jacket and stages in stainless steel AISI 316. Impellers Radial impellers: 6SDX(L) 13-18-27. Mixed flow impellers: 6SDX(L) 30-46-65, 8SDX(L) 78-97. Connection: Screwed connection ISO 228 Delivery casing with built-in non-return valve.

View Complete Details

IMMERSION PUMPS SD

  • FLOW 0.15 / 21
  • HEAD 6.6 / 305
  • POWER 0.37 / 10

Submersible borehole pumps for 4” wells (DN 100 mm), and 6” (DN 150 mm), with external jacket in stainless steel AISI 304 and stages in polycarbonate for 4SD pumps and in noryl for 4SDF, 6SD, 6SDN pumps. Impellers: radial floating impellers: 4SDF 16, 22, 36, 46, 54 radial impellers: 4SD 31, – 6SDN 12, 16, 21 mixed flow impellers: 4SD 10, 15 – 6SD 18, 19, 20 Connection: screwed connection ISO 228. Delivery casing with built-in non-return valve.

View Complete Details

MULTI-STAGE PUMPS MXP

  • FLOW 1 / 7.2
  • HEAD 5 / 40
  • POWER 0.33 / 0.75

Horizontal multi-stage close coupled pump. Single-piece barrel casing in chrome-nickel stainless steel, with front suction port above pumps axis and radial delivery at top. Stages in Noryl. - For water supply. - For domestic use, for garden use and irrigation.

View Complete Details

SELF-PRIMING PUMPS MXA

  • FLOW 1 / 8
  • HEAD 14 / 51
  • POWER 0.45 / 1.1

Horizontal multi-stage, self-priming, close coupled pump. Single-piece barrel casing in chrome-nickel stainless steel, with front suction port above pumps axis and radial delivery at top. Stages in Noryl.For water supply. - For domestic use, for garden use and irrigation.

View Complete Details

SELF-PRIMING PUMPS NG

  • FLOW 0.25 / 9.5
  • HEAD 15.5 / 74.5
  • POWER 0.55 / 22

Close-coupled self-priming shallow well jet pumps with built-in ejector. NG: version with pump casing and lanter bracket in cast iron. B-NG: version with pump casing and lanter bracket in bronze (the pumps are supplied fully painted).

View Complete Details

WHIRPOOL PUMPS NMP

  • FLOW 6.6 / 108
  • HEAD 3 / 37.5
  • POWER 0.55 / 11

Close-coupled self-priming centrifugal pumps with built-in strainer. Inner basket with Ø 3 mm holes. NMP: version with pump casing and lanter bracket in cast iron. B-NMP: version with pump casing and lanter bracket in bronze (the pumps are supplied fully painted).For water circulation in swimming pool filtration systems. - For clean or slightly dirty water with solids in suspension.

View Complete Details

WHIRPOOL PUMPS

  • FLOW 3 / 18
  • HEAD 4.7 / 16.5
  • POWER 0.45 / 1.1

Self-draining, single-impeller pumps, with motor insulated from pumped water, constructed with high quality, corrosionproof plastic materials, with stainless steel diffuser. Compact design (158 mm wide). PVC pipe connections: Ports for cementing joint, with external thread for union coupling. For spas, hydromassage bathtubs and whirlpool baths.

View Complete Details

MULTI-STAGE PUMPS MGP

  • FLOW 1 / 7.2
  • HEAD 5 / 40
  • POWER 0.33 / 0.75

Horizontal multi-stage close coupled pump. Single-piece barrel casing in cast iron, with front suction port above pumps axis and radial delivery at top. Stages in Noryl.For water supply.For domestic use, for garden use and irrigation.

View Complete Details

SELF-PRIMING PUMPS NGL

  • FLOW 0.3 / 8.4
  • HEAD 18 / 55.5
  • POWER 0.45 / 1.5

Close-coupled self-priming shallow-well pump with built-in ejector. For drawing water out of a well. - For lifting water containing air or other gases. - For increasing water pressure from flooded suction applications. - As pressure boosting pump for central water systems with low pressure (follow local specifications if increasing network pressure). - For garden use. - For washing with a jet of water.

View Complete Details

SELF-PRIMING PUMPS NGX

  • FLOW 0.3 / 8.4
  • HEAD 18 / 55.5
  • POWER 0.45 / 1.5

Close-coupled self-priming shallow-well pump with built-in ejector. A high-quality pump for domestic water supply. Designed with environmental considerations, featuring a stainless steel casing, brass alloy impeller with minimal use of plastic materials.For drawing water out of a well. - For lifting water containing air or other gases. - For increasing water pressure from flooded suction applications. - As pressure boosting pump for central water systems with low pressure (follow local specifications if increasing network pressure). - For garden use. - For washing with a jet of water.

View Complete Details

Multi-Stage Pumps

  • Power 0.33 / 7.5
  • FLOW 1 / 66
  • HEAD 5.5 / 68

Horizontal multi-stage close coupled pumps in chrome-nickel stainless steel. Compact and robust construction, without protruding flange and with single-piece lantern bracket and base. Single-piece barrel casing, with front suction port above pumps axis and radial delivery at top. Filling and draining plugs on the middle of the pump, accessible from any side (like the terminal box). MXHL : Horizontal multi-stage close coupled pumps in chromenickel-molybdenum stainless steel AISI 316L.

View Complete Details

Self-Priming Pumps

  • Power 0.55 / 7.5
  • FLOW 3.6 / 66
  • HEAD 3.3 / 33.6

Close-coupled centrifugal pumps with open impeller. The built-in backflow preventer avoids reverse siphoning when the pump is stopped and assures automatic re-priming at the next start. The pump re-primes itself even if partially filled with liquid and with completely empty suction pipe. A: version with pump casing and lanter bracket in cast iron. B-A: version with pump casing and lanter bracket in bronze (the pumps are supplied fully painted).

View Complete Details

WHIRPOOL PUMPS WHIRPOOL PUMPS

  • Power 0.55 / 11
  • FLOW 6.6 / 108
  • HEAD 3 / 37.5

Close-coupled self-priming centrifugal pumps with built-in strainer. Inner basket with Ø 3 mm holes. NMP: version with pump casing and lanter bracket in cast iron. B-NMP: version with pump casing and lanter bracket in bronze (the pumps are supplied fully painted). For water circulation in swimming pool filtration systems. - For clean or slightly dirty water with solids in suspension.

View Complete Details

SELF-PRIMING PUMPS CA

  • Power 0.15 / 0.75
  • FLOW 0.12 / 2.4
  • HEAD 6.5 / 53

Close-coupled self-priming liquid ring pumps with star impeller. CA: version with pump casing and lanter bracket in cast iron. B-CA: version with pump casing and lanter bracket in bronze (the pumps are supplied fully painted). For clean liquids without abrasives, without suspended solids, non-explosive, non-aggressive for the pump materials. - If the liquid to be pumped has entrained air or gas or the flow in the suction pipe is not stable. - For drawing water out of a well. - For increasing network pressure (follow local specifications).

View Complete Details

WHIRPOOL PUMPS MPC

  • FLOW 3 / 40
  • HEAD 4.2 / 18
  • POWER 0.37 / 2.2

Self-priming swimming pool pumps with built-in strainer and motor insulated from pumped water. The pump is made with high quality plastic materials, corrosion and sand erosion resistant. With stainless steel diffuser. Base-plate kit.For water circulation in swimming pool filtration systems. - For clean or slightly dirty water with solids in suspension.

View Complete Details

CIRCULATING PUMPS NCED HQ F

  • Power 0.01 / 0.56
  • FLOW 0.1 / 36
  • HEAD 0.1 / 12.2

Energy saving variable speed circulating pump driven by a permanent magnet synchronous motor (pm) controlled by on board inverter.Heating and conditioning systems

View Complete Details

IMMERSION PUMPS MP

  • FLOW 1 / 8
  • HEAD 2 / 31.5
  • POWER 0.45 / 0.9

Multi-stage centrifugal submersible pumps in chrome-nickel stainless steel, with vertical delivery port.Motor cooled by the pumped water passing between the motor jacket and the external jacket.Double shaft seal with oil chamber.

View Complete Details

Gear Pumps

  • Power 0.33
  • FLOW 0.48 / 2.3
  • HEAD 3 / 41

Close-coupled peripheral pump (regenerative pump) with turbine impeller. Compact, patented construction with singlepiece motor casing and pump-side wall. Protected against water entering the motor from outside. CT: version with pump casing in cast iron. B-CT: version with pump casing in bronze (the pumps are supplied fully painted).

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Santhosh Nair
  • Dubai, Dubai, .., United Arab Emirates